+7 (812) 645-08-06
Differential pressure flow meters
select brand
Differential pressure flow meter / flue gas - 0 - 50 m/s | D-FL 100
Suitability-tested and certified impact pressure system to measure velocity and volume flow of dry flue gas or process gas in pipes or ducts.
In situ measurement,...
In situ measurement,...
Differential pressure flow meter / flue gas - 0 - 50 m/s | D-FL 100
Suitability-tested and certified impact pressure system to measure velocity and volume flow of dry flue gas or process gas in pipes or ducts.
In situ measurement, continuous measurement
Allows calibration to measure the volume flow
Cross duct, half duct and single point versions
Also suitable for thick-walled stone / insulated ducts
Probe is in contact with sample gas, backpurge as an option
Automatic zero check as an option
Universal operation unit D-ISC 100 as an option
Temperature and pressure sensor as option
Normalization of the flow measurements as an option
Very low maintenance
In situ measurement, continuous measurement
Allows calibration to measure the volume flow
Cross duct, half duct and single point versions
Also suitable for thick-walled stone / insulated ducts
Probe is in contact with sample gas, backpurge as an option
Automatic zero check as an option
Universal operation unit D-ISC 100 as an option
Temperature and pressure sensor as option
Normalization of the flow measurements as an option
Very low maintenance
Pitot tube - max. 450 °C | MBZ
The MBZ by Arthur Grillo GmbH is a pilot tube which features its primary element of speed measurement. This specific equipment comes with a certain...
Pitot tube - max. 450 °C | MBZ
The MBZ by Arthur Grillo GmbH is a pilot tube which features its primary element of speed measurement. This specific equipment comes with a certain design which enables cylinder probe to produce a constant wide limits withing Reynolds number coefficient C=2. With this basis of its speed, this make the unit speed to be twice as much as its back pressure. The unit can be made either brass material or stainless steel for ultimate temperature. For its dimension, it comes with a diameter fo 24 mm and a length of 500 mm. These dimension can be customized upon request.
Pitot tube - 100 - 450 °C | SGI
The measuring grid SGI is an arrangement of several cylinder probes which are distributed over a cross section in pipes, channels etc....
Pitot tube - 100 - 450 °C | SGI
The measuring grid SGI is an arrangement of several cylinder probes which are distributed over a cross section in pipes, channels etc. It is a speed measurement similar to the Prandtl Pitot tube. The special design of the SGI grid has an array of probes which are present in a wide range independent of the Reynolds number coefficient C=2. The probes are adapted to the tubes or duct dimensions and can produce circular or rectangular channel cross-sections. For a larger diameter a thrust bearing is used to measure the speed.
Venturi differential pressure flow meter - ø 110 - 350 mm, max. 80 °C | MVR/FVR
The venturi nozzle is made with an inlet profile as per ISA according to DIN EN ISO 5167. The flow which is important and favorable for metering is achieved through the specific deformation...
Venturi differential pressure flow meter - ø 110 - 350 mm, max. 80 °C | MVR/FVR
The venturi nozzle is made with an inlet profile as per ISA according to DIN EN ISO 5167. The flow which is important and favorable for metering is achieved through the specific deformation process of the thermoplastic material. It allows for an exact fitting as well as for extremely smooth surfaces for ideal flow conditions without any costly rework.The pressure relief valves have 4-5 individual bore holes in the cylindrical neck which open out into a ring chamber. For further evaluation, indicators (DA 2000) with a scale in m/h or measuring transducers (DS 200) for remote transmission of the measuring signal are available. The exact design of the indicators or the measuring transducers depends on the design data which are to be clarified beforehand.
Venturi differential pressure flow meter - ø 110 - 350 mm, max. 80 °C | VMD
The venturi tube MVR/FVR is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube has been especially designed for air flow...
Venturi differential pressure flow meter - ø 110 - 350 mm, max. 80 °C | VMD
The venturi tube MVR/FVR is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube has been especially designed for air flow metering in ventilation channels. Mounting of the venturi tube in the installation has to be made using plug sockets with the corresponding lip seals. A version with flange connection can also be supplied. The venturi tube is a one-piece extruded housing made of PPs. High accuracy of fit and optimum centering is guaranteed with socket or flange connection on both sides. The threaded or flanged version made short and long versions are also available. In addition, This product is manufactured to DIN ISO 5167. The combination with the differential pressure gauges and transmitters are possible.
Pitot tube with aluminum frame - VAP³®/AES
The uniquely designed insertion style pitot, VAP3®/AES Pitot is specially designed for use within any industrial air flow duct. The pitot is inserted into an air stream to produce accurate differential pressure output that enables precise air flow measurement or control of process....
Pitot tube with aluminum frame - VAP³®/AES
The uniquely designed insertion style pitot, VAP3®/AES Pitot is specially designed for use within any industrial air flow duct. The pitot is inserted into an air stream to produce accurate differential pressure output that enables precise air flow measurement or control of process....
Pitot tube stainless steel - VAP³®/SFS
The VAP3®/SFS Pitot is intended for use in a variety of industrial air or gas flow ducts, and offers excellent performance when used in corrosive gas flows or at exceedingly high temperatures. This insertion style pitot features...
Pitot tube stainless steel - VAP³®/SFS
The VAP3®/SFS Pitot is intended for use in a variety of industrial air or gas flow ducts, and offers excellent performance when used in corrosive gas flows or at exceedingly high temperatures. This insertion style pitot features...
Pitot tube heated - VAP³®
The VAP³ by Eastern Instruments is a heated pilot tube which comes with an integral heating element that enables it to have an accurate differential pressure. Its accuracy depends...
Pitot tube heated - VAP³®
The VAP³ by Eastern Instruments is a heated pilot tube which comes with an integral heating element that enables it to have an accurate differential pressure. Its accuracy depends...
Pitot flow meter / for gas / for air / multi-point - DSV
The DSV by Eastern Instruments is a Multi-point Pitot air and gas flow meter which retains all features in the VAP3 pitot. For this type of equipment, it looks complicated but it is just easy to order...
Pitot flow meter / for gas / for air / multi-point - DSV
The DSV by Eastern Instruments is a Multi-point Pitot air and gas flow meter which retains all features in the VAP3 pitot. For this type of equipment, it looks complicated but it is just easy to order and install. The DSV comes with a round structure that has a channel air flow located on the measurement section of the unit. Just like VSP3, it can also be used with another existing ducts designed for clean air applications and particulate laden applications. Also, the complete unit comes with multiple total and static sensing ports which located in place wherein it can provide a full traverse of the duct. With this tool, it eliminates the need of random distribution of air flow. Plus, it utilizes VAP pitot technology for accuracy and convenience of the performance of the equipment.