+7 (812) 645-08-06
Differential pressure flow meters
select brand
Pitot tube - 160 series
Dwyer Pitot Tubes are ideally used with air velocity gauges and precision manometers as they are fully-constructed using stainless steel that is corrosion-resistant, granting the product a lifetime service. To achieve maximum accuracy through the various flow conditions, AMCA and ASHRAE...
Pitot tube - 160 series
Dwyer Pitot Tubes are ideally used with air velocity gauges and precision manometers as they are fully-constructed using stainless steel that is corrosion-resistant, granting the product a lifetime service. To achieve maximum accuracy through the various flow conditions, AMCA and ASHRAE specifications have been considered with regard to the ASME design. Because the ASHRAE tip design produce a calibration factor of only one, the need for correction factors is notably eliminated. Moreover, the ASHRAE design does not need any calibration anymore.
Facilitating accurate positioning, there are permanent and stamped insertion depth graduations installed on all sides of the 160 series. There is also a static pressure port available just parallel to the sensing tube, making the alignment of the tube and airflow quick and easy. Even when the tube does not follow the alignment for 15 degrees maximum, the device is less sensitive to the misalignment and still gives accurate readings.
Different sizes are available, with ducts measuring 4" in diameter to as large as 36ft. A universal model is also supplied.
Facilitating accurate positioning, there are permanent and stamped insertion depth graduations installed on all sides of the 160 series. There is also a static pressure port available just parallel to the sensing tube, making the alignment of the tube and airflow quick and easy. Even when the tube does not follow the alignment for 15 degrees maximum, the device is less sensitive to the misalignment and still gives accurate readings.
Different sizes are available, with ducts measuring 4" in diameter to as large as 36ft. A universal model is also supplied.
Differential pressure orifice flow meter - OP/PE/TE series
Dwyer's OP Series of orifice plate flowmeters is a comprehensive line of flow metering instruments. They are manufactured out of a stainless steel material, and incorporate a novel...
Differential pressure orifice flow meter - OP/PE/TE series
Dwyer's OP Series of orifice plate flowmeters is a comprehensive line of flow metering instruments. They are manufactured out of a stainless steel material, and incorporate a novel carrier or holder ring which includes integrated metering tap mechanisms as well as essential gaskets. These plates are specifically engineered to be utilized for any and every flow orifice plate field of application there is.
Installing these orifices are quick and easy. Just slip the unit through standard flanges, and installation is complete.
The Dwyer OP Series comes in alternative line measurements, ranging from 1/2 inches to 24 inches, and can be utilized with adaptable gases, as well as liquids.
Installing these orifices are quick and easy. Just slip the unit through standard flanges, and installation is complete.
The Dwyer OP Series comes in alternative line measurements, ranging from 1/2 inches to 24 inches, and can be utilized with adaptable gases, as well as liquids.
Differential pressure orifice flow meter - DTFF series
This product is suitable for various industry applications, especially those that require measuring the flow rate of water, air or oil, with high accuracy....
Differential pressure orifice flow meter - DTFF series
This product is suitable for various industry applications, especially those that require measuring the flow rate of water, air or oil, with high accuracy. The product will also save plenty of money in the long run, being a cost-effective solution with a design that is resistant, and made of high-quality stainless steel, which also ensures good compatibility with various projects.
The maximum operating pressure is 206.7 bar (3000psig), while sensitivity is not sacrificed. There are various flow rates available, and the item comes per-calibrated for in-line mounting in a horizontal position.
The maximum operating pressure is 206.7 bar (3000psig), while sensitivity is not sacrificed. There are various flow rates available, and the item comes per-calibrated for in-line mounting in a horizontal position.
Differential pressure flow meter / for air / for gas - Fluke 922
The Fluke 922 micromanometer is designed to provide HVAC technicians with a powerful airflow analyzer tool as it combines differential pressure, airflow, and velocity measurement tools...
Differential pressure flow meter / for air / for gas - Fluke 922
The Fluke 922 micromanometer is designed to provide HVAC technicians with a powerful airflow analyzer tool as it combines differential pressure, airflow, and velocity measurement tools in a single rugged and easy to use device. When diagnosing ventilation issues the Fluke 922 provides a cost-effective and performance increasing alternative to expensive, specialized tools. This model is best used for pressure drop measurement across key HVAC equipment, matching of ventilation to occupant loads, indoor/outdoor pressure relation monitoring and management of the building envelope as well as duct traversals that can provide precise airflow analysis. Additionally it helps improve quality and comfort of any indoor area.
Differential pressure flow meter - FCO732 series
The FCO732 is manufactured by Furness Controls. It is a production line flow meter with an effective accuracy of <±1%...
Differential pressure flow meter - FCO732 series
The FCO732 is manufactured by Furness Controls. It is a production line flow meter with an effective accuracy of <±1%...
Differential pressure flow meter - FCO752
The FCO752 is manufactured by Furness Controls. It is a differential pressure flow meter, with an air and gas flow range from 0.01 ml/min to 10,000 l/min. It also has an automatic...
Differential pressure flow meter - FCO752
The FCO752 is manufactured by Furness Controls. It is a differential pressure flow meter, with an air and gas flow range from 0.01 ml/min to 10,000 l/min. It also has an automatic pressure and temperature compensation. Availability includes single or multiple test variants, automatic pressure control variant, and fractional blockage identification and cross sectional sector testing.
Alternatively, the flow meter can be also used for leak testing as well as carrying out blockage tests for determining fractional blockages in products and components. It is useful in testing various components, like exhaust systems, laser drilling, medical devices, cookers, gas fires, boilers, castings, and fuel pumps.
Alternatively, the flow meter can be also used for leak testing as well as carrying out blockage tests for determining fractional blockages in products and components. It is useful in testing various components, like exhaust systems, laser drilling, medical devices, cookers, gas fires, boilers, castings, and fuel pumps.
Pitot tube - 500 °C | FCO65
The FC065 is a single point pitot static tube manufactured by Furness Controls. This...
Pitot tube - 500 °C | FCO65
The FC065 is a single point pitot static tube manufactured by Furness Controls. This...
Pitot tube - 1/4 - 1" | FCO68
The FCO68 is a average pitot tube is intended to measure the flow over a pipe or duct using 5 pressure ports on the upstream part and...
Pitot tube - 1/4 - 1" | FCO68
The FCO68 is a average pitot tube is intended to measure the flow over a pipe or duct using 5 pressure ports on the upstream part and single static pressure port for the downstream part. it can be utilized for majority of industrial implementation. With an averaging pattern for inflation validity, a well made stainless steel structure and different length is accessible from 1/4" to 1". It is specially construct to suit your pipe or duct. FCO68 is accessible with welded flange or stuffing box and locking gland.