+7 (812) 645-08-06
Remote terminal units (RTU)
select brand
PAC - POWER L
Power L series all-in-one controllers feature a color 5.7” VGA touch screen display, 28 digital I/O, possibility of 60 I/O via INT-SPI interface, 11 analog 12-bit inputs, including 1 input conditioned...
PAC - POWER L
Power L series all-in-one controllers feature a color 5.7” VGA touch screen display, 28 digital I/O, possibility of 60 I/O via INT-SPI interface, 11 analog 12-bit inputs, including 1 input conditioned...
PAC - POWER N
With the careful redesign of the main board of the power M, that is based on a new processor RISC and a 32 bit having clock at 264 Mhz, the new controller power N is able to provide the following features. The floating point calculations...
PAC - POWER N
With the careful redesign of the main board of the power M, that is based on a new processor RISC and a 32 bit having clock at 264 Mhz, the new controller power N is able to provide the following features. The floating point calculations can be performed optionally in double precision. The 64 bit also comes with a Flash EPROM that has been improved by 1 Mbyte from 7 to 8 Mbyte. This provides new implementations of operating system along with the largest volume F of the family PID procession speed so as to adjust the axis. This increases the speed by 25% passing from 15 to 12 microseconds per axis, this allows you to reduce, when necessary to a sampling time of just 200 microseconds. The medium processing time for general instructions has been reduced by 40%. Some analog inputs can be processed digitally DSP via a FIR ( Finite Impulse Response) . The algorithm Digital inputs manageable in interrupt have also been increased.
Terminal unit modular - PA 15
The PA 15 is a modular remote terminal unit or RTU controller by Steca. It can send out 125kHz signals on 300 Baud...
Terminal unit modular - PA 15
The PA 15 is a modular remote terminal unit or RTU controller by Steca. It can send out 125kHz signals on 300 Baud which are modulated on the DC cable and the Steca PA 15 remote control receives it. The signals have the batteries' State of Charge or SOC's details. This unit have 5 various modes on operations set by 5 various jumper positions. It can switch up to 15A. PA EV200 DC relay can enhance the switching capacity to a maximum of 200A.
Terminal unit - 9 - 30 V | C2360B-0-0
Low Power Operation
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board...
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board...
Terminal unit - 9 - 30 V | C2360B-0-0
Low Power Operation
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral Real Time Clock with Battery Backup
Programmable for a wide range of applications
Wide Operating Temperature range
Compact Size for tight spaces
Convenient DIN rail mounting
Modbus RS232/RS485 or Custom Protocol Port
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral Real Time Clock with Battery Backup
Programmable for a wide range of applications
Wide Operating Temperature range
Compact Size for tight spaces
Convenient DIN rail mounting
Modbus RS232/RS485 or Custom Protocol Port
Terminal unit - 9 - 30 V | C2361C-0-0
12 Configurable Inputs and Outputs
10/100 Ethernet port
ISaGRAF 61131-3 Programmable
...
10/100 Ethernet port
ISaGRAF 61131-3 Programmable
...
Terminal unit - 9 - 30 V | C2361C-0-0
12 Configurable Inputs and Outputs
10/100 Ethernet port
ISaGRAF 61131-3 Programmable
micro-SD Card Logging
Low power operation
Two serial ports (incl. RS485)
Programmable 10/100 ETHERNET RTU with 12 Universal I/O DI/DO/AI/AO, RS232/485 Modbus Master or Slave or Conet/s or Custom Protocol. Powered from 9-30Vdc. Battery backed Real Time Clock
10/100 Ethernet port
ISaGRAF 61131-3 Programmable
micro-SD Card Logging
Low power operation
Two serial ports (incl. RS485)
Programmable 10/100 ETHERNET RTU with 12 Universal I/O DI/DO/AI/AO, RS232/485 Modbus Master or Slave or Conet/s or Custom Protocol. Powered from 9-30Vdc. Battery backed Real Time Clock
Terminal unit - 9 - 30 V | C2321A
12 Inputs and/or Outputs (Analog or Digital)
9 - 30V dc powered.
SD Memory Card Slot...
9 - 30V dc powered.
SD Memory Card Slot...
Terminal unit - 9 - 30 V | C2321A
12 Inputs and/or Outputs (Analog or Digital)
9 - 30V dc powered.
SD Memory Card Slot for off-line data logging
On-board temperature sensor and voltage monitor
Integral Real-Time Clock with Battery Backup
Programmable for a wide range of applications
Wide operating temperature range
Compact size for tight spaces
Convenient DIN Rail mounting
9 - 30V dc powered.
SD Memory Card Slot for off-line data logging
On-board temperature sensor and voltage monitor
Integral Real-Time Clock with Battery Backup
Programmable for a wide range of applications
Wide operating temperature range
Compact size for tight spaces
Convenient DIN Rail mounting
Terminal unit - 9 - 30 V | C2360C-0-0
Low Power Operation
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board...
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board...
Terminal unit - 9 - 30 V | C2360C-0-0
Low Power Operation
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral Real Time Clock with Battery Backup
Programmable for a wide range of applications
Wide Operating Temperature range
Compact Size for tight spaces
Convenient DIN rail mounting
Modbus RS232/RS485 or Custom Protocol Port
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral Real Time Clock with Battery Backup
Programmable for a wide range of applications
Wide Operating Temperature range
Compact Size for tight spaces
Convenient DIN rail mounting
Modbus RS232/RS485 or Custom Protocol Port
Terminal unit - 2.4 GHz, 63 mW | C2360B-31-0
Low Power Operation
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral...
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral...
Terminal unit - 2.4 GHz, 63 mW | C2360B-31-0
Low Power Operation
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral Real Time Clock with Battery Backup
Programmable for a wide range of applications
Wide Operating Temperature range
Compact Size for tight spaces
Convenient DIN rail mounting
Modbus RS232/RS485 or Custom Protocol Port
2.4GHz FHSS Radio Port Licence Free
Prog 2.4GHz 63mW FHSS RADIO RTU with 12 Universal I/O DI/DO/AI/AO, RS232/485 Modbus Master or Slave or Conet/s or Custom Protocol. Power 9-30Vdc. Battery backed Real Time Clock.
9 to 30Vdc Powered
SD Memory Card Slot for Local Logging
On-board temperature sensor and supply voltage monitor
Integral Real Time Clock with Battery Backup
Programmable for a wide range of applications
Wide Operating Temperature range
Compact Size for tight spaces
Convenient DIN rail mounting
Modbus RS232/RS485 or Custom Protocol Port
2.4GHz FHSS Radio Port Licence Free
Prog 2.4GHz 63mW FHSS RADIO RTU with 12 Universal I/O DI/DO/AI/AO, RS232/485 Modbus Master or Slave or Conet/s or Custom Protocol. Power 9-30Vdc. Battery backed Real Time Clock.