+7 (812) 645-08-06
Pump controllers
select brand
Pump controller electric / firefighting - 110 - 600 V, 5 - 50 HP | Firetrol FTA550E XG
The FTA550E is a full voltage unit that works for when an emergency...
Pump controller electric / firefighting - 110 - 600 V, 5 - 50 HP | Firetrol FTA550E XG
The FTA550E is a full voltage unit that works for when an emergency generator set can allow the unit to work with care. This is made for pressure maintenance needs in fire pumps to keep cycling from being a threat on any fire pump unit.
Pump controller electric / firefighting - 200 - 600 V | Firetrol FTA740
The Firetrol FTA740 Single Phase Limited controller is made to work with a small...
Pump controller electric / firefighting - 200 - 600 V | Firetrol FTA740
The Firetrol FTA740 Single Phase Limited controller is made to work with a small electric motor when the capacity of a power source allows for full voltage starts. This is made with a full voltage that goes onto the motor as the controller starts to work. This is also made to display pump system information as needed.
Pump controller firefighting / diesel engine - Firetrol FTA1100-H
The Firetrol FTA1100H is a diesel engine fire pump controlled. It is a Mark II unit taht can start engines in a Class 1 and Division 2 location. This uses a T3 temperature rating...
Pump controller firefighting / diesel engine - Firetrol FTA1100-H
The Firetrol FTA1100H is a diesel engine fire pump controlled. It is a Mark II unit taht can start engines in a Class 1 and Division 2 location. This uses a T3 temperature rating and works with 12 or 24 volt negative ground systems with lead acid or NiCd batteries. It can also be used with 10 or 20 amp circuits. A controller will also display information on the fire pump and will update information on it as needed.
The Firetrol controll is a UL-listed product that is useful for use in Class I and II, Division 2 and Class III Hazardous areas. This also has UL698 certification to go with it. This is made to work in many hazardous settings and can exceed all NFPA 20 requirements.
The Firetrol controll is a UL-listed product that is useful for use in Class I and II, Division 2 and Class III Hazardous areas. This also has UL698 certification to go with it. This is made to work in many hazardous settings and can exceed all NFPA 20 requirements.
Pump controller medium-voltage / firefighting - 2 200 - 7 200 V, 1 500 - 3 500 HP | Firetrol FTA2000
Firetrol FTA2000 is an automatic and manual class E2 voltage controlled made for managing squirrel cage motors...
Pump controller medium-voltage / firefighting - 2 200 - 7 200 V, 1 500 - 3 500 HP | Firetrol FTA2000
Firetrol FTA2000 is an automatic and manual class E2 voltage controlled made for managing squirrel cage motors that drive fire pumps. These controllers are UL-listed in accordance with UL218 and are made to meet NEMA and NFPA20 standards to ensure that the unit will work with care. This is all to manage the National Electrical Code's requirements for getting units to work with the right functionality features as they are needed.
Pump control switch - NEMA
Our NEMA Water pump Manage Sections possess a engine circuit guard. You are able to personalize all of them with a number of beginner kinds for particular accessories and applications for manage and analysis comments.
Pump controller
Presenting a top of the line product. From Evoqua manufacturers comes the IntraLink LC2000/LC3000....
Pump controller
Presenting a top of the line product. From Evoqua manufacturers comes the IntraLink LC2000/LC3000. It features accurate and reliable monitoring and control devices and systems for the operation of pumps,valves and alarms in water distribution, water and wastewater plants, sewage pumping stations, irrigation systems and remote control and telemetry systems.
Pump controller - LC150
The LC150 is designed specifically for pump station applications and offers a simple, reliable and cost effective solution....
Pump controller - LC150
The LC150 is designed specifically for pump station applications and offers a simple, reliable and cost effective solution. The LC150 is configurable. No programming is required.
The LC150 "View-At-A-Glance" operator interface allows the operator to monitor and control the operation of 2 or 3 pumps without ever touching a button. More advanced features allow the operator to perform historical and statistical information to maintain pump stations more effectively.
The LC150 "View-At-A-Glance" operator interface allows the operator to monitor and control the operation of 2 or 3 pumps without ever touching a button. More advanced features allow the operator to perform historical and statistical information to maintain pump stations more effectively.