+7 (812) 645-08-06
Studs
select brand
Crimp-on stud / flush head - IPFH series
The IPFH series is a sheet metal fastener manufactured by Inserco company. It has a 80 HRB max and it is stainless steel. Further, it has an aluminum clinch studs of 50 HRB Max.
Crimp-on stud - IPFHL series
The IPFHL series, manufactured by INSERCO, is a self-clinching stud that can be installed near to the sheet of a metal edge. It can be made from carbon or A2 stainless steel and can be equipped with either a plain or a zinc plating.
Crimp-on stud - IHPFH series
Most compelling hardness of gatekeeper material: Steel parts - 85 HRB, Stainless Steel parts -70 HRB. The most part made of steel or could be of aluminum if possible on sales.
Crimp-on stud - M2.5 - M8 | Clifa series
The Kerb Konus has manufactured the Clifa series, which has different dimensions from M2.5...
Crimp-on stud - M2.5 - M8 | Clifa series
The Kerb Konus has manufactured the Clifa series, which has different dimensions from M2.5 up to M8. The tool is suitable for use in press-in flushing to the surface. It can also be used as SP coarse and SR fine toothing. This equipment features either drilled or pre-punched receiving hole. In addition, the device has a medium sized of torque-out.
Threaded bolt / with eye - 2437
FEATURES: Lifting Eyes are forged steel eyebolts with an integral shoulder for greater strength. These simple, economical...
Threaded bolt / with eye - 2437
FEATURES: Lifting Eyes are forged steel eyebolts with an integral shoulder for greater strength. These simple, economical lifting devices are suitable for vertical lifting in-line with the threaded bolt, such as when lifting from a single point or from two points with a spreader bar. For lifting at an angle, Swivel Hoist Rings should be used instead. Manufactured and tested according to ASTM A489 and ANSI B18.15 specifications. Safety factor = 5:1. Made in USA.
Clamping stud - 447
The clamping stud from Carr Lane is engineered to be a strong unit that may be used for any application. It is suitable for operations with a T nut, and with a direct installation onto a fixture plate. Moreover, this product may be supplied as a steel or a stainless steel unit.