+7 (812) 645-08-06
Hydraulic gearmotors
select brand
External-gear hydraulic motor - 4 - 28 cc, max. 250 bar | 1APM
Displacement : 4cc - 28cc
Max. Speed : 3500 rpm
Max. Pressure : 250 bar
Max. Speed : 3500 rpm
Max. Pressure : 250 bar
Gear hydraulic motor / aluminium - 19 - 100 cc, max. 230 bar | 2APM1
Displacement : 19cc - 100cc
Max. Speed : 3000 rpm
Max. Pressure : 230 bar
Max. Speed : 3000 rpm
Max. Pressure : 230 bar
Gear hydraulic motor / cast iron - 17 - 100 cc, max. 300 bar | 1GPM
Displacement : 17cc - 100cc
Max. Speed : 2500 rpm
Max. Pressure : 300 bar
Max. Speed : 2500 rpm
Max. Pressure : 300 bar
Gear hydraulic motor / cast iron - 63 - 151 cc, max. 280 bar | 2GPM
Displacement : 63cc - 151cc
Max. Speed : 1750 rpm
Max. Pressure : 280 bar
Max. Speed : 1750 rpm
Max. Pressure : 280 bar
Gear hydraulic motor - 0.8 - 7.9 cc/r | PM series
The PM 23 series hydraulic gear motors are an innovated version of the PM 2 series and their design arises from the P2 series gear pumps. Their body, flange and cover are made of aluminium alloy, the gears are of steel. They are equipped with the hydraulic...
Gear hydraulic motor - 0.8 - 7.9 cc/r | PM series
The PM 23 series hydraulic gear motors are an innovated version of the PM 2 series and their design arises from the P2 series gear pumps. Their body, flange and cover are made of aluminium alloy, the gears are of steel. They are equipped with the hydraulic balancing of axial clearance. In comparison with the original design they have remarkable better parameters of noise and efficiency within the whole range of speed and temperature. They are being manufactured in unidirectional design as clockwise or anticlockwise motors, they can be in a reversible version, too.
The range of geometrical volumes of the motors are Vg=0,8 to 7.9 ccm/rev, the range of working speed is from 600 to 5000 min-1 and maximal working pressure is 300 bar.
The hydraulic motors are being manufactured in a wide range of drives, connecting flanges and fluid inputs and outputs. They conform to the ISO, SAE and other worldwide accepted standards. They are entirely compatible with the PM 2 series.
The range of geometrical volumes of the motors are Vg=0,8 to 7.9 ccm/rev, the range of working speed is from 600 to 5000 min-1 and maximal working pressure is 300 bar.
The hydraulic motors are being manufactured in a wide range of drives, connecting flanges and fluid inputs and outputs. They conform to the ISO, SAE and other worldwide accepted standards. They are entirely compatible with the PM 2 series.
Gear hydraulic motor - 4 - 32 cc/r | TM series
The TM 3 series hydraulic gear motors are an innovated version of the TM series and their design arises from the T2 series gear pumps. Their body is made of aluminium alloy, flange and cover are of cast iron, the gears are of steel. They are equipped with the hydraulic balancing of axial clearance. In comparison...
Gear hydraulic motor - 4 - 32 cc/r | TM series
The TM 3 series hydraulic gear motors are an innovated version of the TM series and their design arises from the T2 series gear pumps. Their body is made of aluminium alloy, flange and cover are of cast iron, the gears are of steel. They are equipped with the hydraulic balancing of axial clearance. In comparison with the original design they have remarkable better parameters of noise, higher working pressure with higher capacity, torque and efficiency within the whole range of speed and temperature. They are being manufactured in unidirectional design as clockwise or anticlockwise motors, they can be in a reversible version, too.
The range of geometrical volumes of the motors are Vg=4 to 32 ccm/rev, the range of working speed is from 500 to 4000 min-1 and maximal working pressure is 270 bar.
The hydraulic motors are being manufactured in a wide range of drives, connecting flanges and fluid inputs and outputs. They conform to the ISO, SAE and other worldwide accepted standards. They are entirely compatible with the TM series.
For difficult operations with axial load and hard radial load of driving gear is in this series available hydraulic motor with auxiliary bearing in the flange.
The range of geometrical volumes of the motors are Vg=4 to 32 ccm/rev, the range of working speed is from 500 to 4000 min-1 and maximal working pressure is 270 bar.
The hydraulic motors are being manufactured in a wide range of drives, connecting flanges and fluid inputs and outputs. They conform to the ISO, SAE and other worldwide accepted standards. They are entirely compatible with the TM series.
For difficult operations with axial load and hard radial load of driving gear is in this series available hydraulic motor with auxiliary bearing in the flange.
Gear hydraulic motor - 10 - 100 cc/r | QM series
The QM series hydraulic gear motors have a design which arises from the Q series gear pumps. Their body is made of aluminium alloy, flange and cover are of cast iron, the gears are of steel. They are equipped with the hydraulic balancing of axial clearance. Their modern design enables...
Gear hydraulic motor - 10 - 100 cc/r | QM series
The QM series hydraulic gear motors have a design which arises from the Q series gear pumps. Their body is made of aluminium alloy, flange and cover are of cast iron, the gears are of steel. They are equipped with the hydraulic balancing of axial clearance. Their modern design enables remarkable better parameters of noise, higher working pressure with higher capacity, torque and efficiency within the whole range of speed and temperature. They are being manufactured in unidirectional design as clockwise or anticlockwise motors, they can be in a reversible version, too.
For difficult operations with axial load and hard radial load of driving gear is in this series available hydraulic motor with auxiliary bearing in the flange.
The range of geometrical volumes of the motors are Vg=10 to 100 ccm/rev, the range of working speed is from 500 to 3000 min-1 and maximal working pressure is 290 bar.
The hydraulic motors are being manufactured in a wide range of drives, connecting flanges and fluid inputs and outputs. They conform to the ISO, SAE and other worldwide accepted standards.
For difficult operations with axial load and hard radial load of driving gear is in this series available hydraulic motor with auxiliary bearing in the flange.
The range of geometrical volumes of the motors are Vg=10 to 100 ccm/rev, the range of working speed is from 500 to 3000 min-1 and maximal working pressure is 290 bar.
The hydraulic motors are being manufactured in a wide range of drives, connecting flanges and fluid inputs and outputs. They conform to the ISO, SAE and other worldwide accepted standards.
External-gear hydraulic motor - 0.5 - 250 cm³/rev, 250 bar
The JTEKT HPI range of hydraulic gear motors has a capacity of 0.5 to 250 cm3/rev....
External-gear hydraulic motor - 0.5 - 250 cm³/rev, 250 bar
The JTEKT HPI range of hydraulic gear motors has a capacity of 0.5 to 250 cm3/rev. with a peak pressure up to 250 bar, excellent start-up pressure and flow conditions, and is the widest on the market.
They are modular in design, and suitable to all market standards: ISO, DIN, SAE, Italian type, etc.
They are modular in design, and suitable to all market standards: ISO, DIN, SAE, Italian type, etc.