+7 (812) 645-08-06
Gears, racks
select brand
Spiroid gear / steel / custom
Timken creates Parallel Axis as well as Spiral Bevel Gears for aerospace applications up to Class 15 AGMA tolerances including Helicals, Splines (straight and crowned) and Curvics. Timken uses...
Spiroid gear / steel / custom
Timken creates Parallel Axis as well as Spiral Bevel Gears for aerospace applications up to Class 15 AGMA tolerances including Helicals, Splines (straight and crowned) and Curvics. Timken uses only the top-class materials such as carburizing 9310 and Pyrowear X-53, and nitriding steel for its gears.
Additionally, various processes are used for surfaces which prevents fatigue, wear and corrosion by lowering the friction. All gears need to pass the nondestructive testing and inspections while few of them undergo isotropic super-finishing for increasing the gearbox wear resistance.
The whole manufacturing process right from the start till end, goes through a thorough inspection and records all details of the dimensions and process controls.
Additionally, various processes are used for surfaces which prevents fatigue, wear and corrosion by lowering the friction. All gears need to pass the nondestructive testing and inspections while few of them undergo isotropic super-finishing for increasing the gearbox wear resistance.
The whole manufacturing process right from the start till end, goes through a thorough inspection and records all details of the dimensions and process controls.
Rack and roller pinion drive - max. 850 Nm, 2 - 4 mm | MPRN, MPRW series
The Rack & Pinion Drive type MPRN, MPRW is a linear actuator that comprises...
Rack and roller pinion drive - max. 850 Nm, 2 - 4 mm | MPRN, MPRW series
The Rack & Pinion Drive type MPRN, MPRW is a linear actuator that comprises a pair of gears which convert rotational motion into linear motion. It is oil-lubricated, and has an output torque capacity of 850 Nm. It also offers a 2-4 modul with sizes ranging from 050, 100, 200, 300, 04, 05.
Steel worm gear / anti-backlash - i=13:1 - 65:1 | KES series
Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide...
Steel worm gear / anti-backlash - i=13:1 - 65:1 | KES series
Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.
Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.
Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bevel gear / resin / thermoplastic - i= 1:1 - 5:1
Die cast bevel gears made of acetal resin. The shaft angle is at 90°. Has module 1, 5 machined bores. The gears run as a pair of stated ratio. It has been proved that thermoplastic materials have better thermal...
Bevel gear / resin / thermoplastic - i= 1:1 - 5:1
Die cast bevel gears made of acetal resin. The shaft angle is at 90°. Has module 1, 5 machined bores. The gears run as a pair of stated ratio. It has been proved that thermoplastic materials have better thermal...