+7 (812) 645-08-06
Electromagnets
select brand
Linear solenoid - 18 - 48 A, 20 - 45 mm | I series
The I series, manufactured by ABTrasmission, are single-coil linear solenoids...
Linear solenoid - 18 - 48 A, 20 - 45 mm | I series
The I series, manufactured by ABTrasmission, are single-coil linear solenoids equipped with a cylindrical electric coil. They have a power supply that ranges from 18 up to 48 A and length from 20 up to 45 mm. These linear solenoids are used in a wide range of applications involving traction and thrust.
Linear solenoid - 17.1 - 60 A, 20 - 45 mm | C, CI series
The Double-Coil Linear Solenoids are specifically designed with a modern and robust finish to enhance the...
Linear solenoid - 17.1 - 60 A, 20 - 45 mm | C, CI series
The Double-Coil Linear Solenoids are specifically designed with a modern and robust finish to enhance the device's performance. They are built with a very high pulling force capability which provides a holding function in a continuous service cycle of 100% ED. It is ideally constructed with an internal switch wherein the pull circuit acts as the core which has the capacity of reaching the maximum stoke limit.
Linear solenoid - 0.63 - 1.5 A, 12 mm | CM series
The single-coil linear solenoid is intended to be used in some applications that...
Linear solenoid - 0.63 - 1.5 A, 12 mm | CM series
The single-coil linear solenoid is intended to be used in some applications that require only small movements. This device offers a stable force during the entire stroke, both in traction and thrust applications. Moreover, it can also be utilized for continuous duty cycles of 100% ED, or for intermittent duty cycles.
DC solenoid / rotary - 0.68 - 2.5 A | CR series
The Single-Coil Linear Solenoids are ideally designed to provide a good quality...
DC solenoid / rotary - 0.68 - 2.5 A | CR series
The Single-Coil Linear Solenoids are ideally designed to provide a good quality...
Linear solenoid - 1.1 - 5.2 A, 20 - 30 mm | CS series
The single-coil linear solenoids of the CS series represent an excellent solution for traction and...
Linear solenoid - 1.1 - 5.2 A, 20 - 30 mm | CS series
The single-coil linear solenoids of the CS series represent an excellent solution for traction and thrust applications requiring non-stop motion and high movement precision. They are capable of providing constant pressure output over the entire stroke and are well suited for continuous duty cycles of 100% ED. They are also available in custom variants designed for intermittent duty cycles.
Linear actuator / solenoid - max. 0.8 N, max. 3.2 mm | NCC01-04-001-1X
They are supplied with shafts are bearings. The length is...
Linear actuator / solenoid - max. 0.8 N, max. 3.2 mm | NCC01-04-001-1X
They are supplied with shafts are bearings. The length is short while the diameter is big. Simply by increasing the dismeter, high forces can be achieved. such an actuator can also be designed with large radial clearances.
Linear actuator / solenoid - max. 2 N, max. 3 mm | NCC01-07-001-1R
The NCC01-07-001-1R are ideally designed to provide a good quality performance and functionality....
Linear actuator / solenoid - max. 2 N, max. 3 mm | NCC01-07-001-1R
The NCC01-07-001-1R are ideally designed to provide a good quality performance and functionality. They are basically provided with a shaft and several linear bushings. The actuators are built in a very small diameter rate yet with longer length in the NCC actuators. The higher forces may be obtained through increasing the diameter or length.
Linear actuator / solenoid - max. 1.51 N, max. 3.2 mm | NCC01-09-001-1NH
The NCC01-09-001-1NH are ideally designed to provide a good quality performance and functionality....
Linear actuator / solenoid - max. 1.51 N, max. 3.2 mm | NCC01-09-001-1NH
The NCC01-09-001-1NH are ideally designed to provide a good quality performance and functionality. They are basically provided with a shaft and several linear bushings. The actuators are built in a very small diameter rate yet with longer length in the NCC actuators. The higher forces may be obtained through increasing the diameter or length.
Linear actuator / solenoid - max. 1.47 N, max. 3 mm | NCC01-09-001-1S
The Non-Comm DC Voice Coil Linear Actuator is a bearing-and shaft-free device that measures...
Linear actuator / solenoid - max. 1.47 N, max. 3 mm | NCC01-09-001-1S
The Non-Comm DC Voice Coil Linear Actuator is a bearing-and shaft-free device that measures larger in diameter but shorter in length. This product can achieve higher forces by adjusting/increasing its diameter. This type of actuator can be customized with larger radial clearances in order to ensure that there is no contact between the coil and the magnet assembly.
Linear actuator / solenoid - max. 3.5 N, max. 5.1 mm | NCC02-07-001-1R
NCC02-02-001-1R is a non-comm DC voice coil linear actuator manufactured by H2W. The device is not provided...
Linear actuator / solenoid - max. 3.5 N, max. 5.1 mm | NCC02-07-001-1R
NCC02-02-001-1R is a non-comm DC voice coil linear actuator manufactured by H2W. The device is not provided standard with bearings or shaft, but may be provided depending on the user's desire. It can attain higher forces by increasing the tool's diameter, and may be designed with large radial clearances. The latter aid in ensuring that there is no contact between the coil and the magnet assembly when tilting is needed.