+7 (812) 645-08-06
Lubrication pumps
select brand
Piston pump / for centralized lubrication system - KFG
SKF KFG piston pump unit for wind turbines has been especially developed for the wind industry. The design is based on SKF's proven KFG series of pumps, which are widely used across the globe in a variety...
Piston pump / for centralized lubrication system - KFG
SKF KFG piston pump unit for wind turbines has been especially developed for the wind industry. The design is based on SKF's proven KFG series of pumps, which are widely used across the globe in a variety...
Piston pump / for centralized lubrication system
Piston pumps work on reciprocating positive-displacement principle. When the first cycle takes place, the lubricant gets sucked through an inlet valve with the help of a piston traveling in one cylinder. This...
Piston pump / for centralized lubrication system
Piston pumps work on reciprocating positive-displacement principle. When the first cycle takes place, the lubricant gets sucked through an inlet valve with the help of a piston traveling in one cylinder. This will then be discharged through the outlet valve. Once the first cycle is complete, relieve the pressure on the actuation pressure, so the pump is ready to suck in more lubricant. The connected distributors will then be reversed and refilled for the next cycle. The piston pumps in the centralized lubrication systems that contribute to total loss lubrication systems. Depending on the system and lubricant used, the technical specifications of the pumps vary. As for the piston pumps, they can be either installed separately or as part of the lubricant reservoir. They can also be flange-mounted inside the lubricant reservoir.
Gear engine-driven pump / for centralized lubrication system / multi-circuits
The Multi-circuit pump units introduced by SKF are ideally designed to function as gear pumps. They offer choices for...
Gear engine-driven pump / for centralized lubrication system / multi-circuits
The Multi-circuit pump units introduced by SKF are ideally designed to function as gear pumps. They offer choices for pump installation such as units for assembly disconnection from the oil reservoir, flange-settling on an oil reservoir, and other units complete with reservoirs. They have 5 to 20 individual delivery circuits that are suitable for hydrostatic bearings. The pumps provide new opportunities to increase uptime and productivity.
Centralized lubrication system pump unit / single circuit
This top of the line device is a single-circuit pump that is accessible in different models, gear pumps, vane pump and Gerotor pump...
Centralized lubrication system pump unit / single circuit
This top of the line device is a single-circuit pump that is accessible in different models, gear pumps, vane pump and Gerotor pump types, offering a versatile system type to meet the varying demands of different applications. To continue, by oscillating with positive-displacement this device can operate. Furthermore, the product can also support, oil, fluid grease and grease, and supplies them in discontinuously operated one line system or via flowing oil lubrication system. The device is easy safe to handle.
Grease pump - ARCA-PUMP
The ARCA-PUMP, which is manufactured by Schaeffler, is a grease dispensing unit that has been developed to provide efficient, and reliable...
Grease pump - ARCA-PUMP
The ARCA-PUMP, which is manufactured by Schaeffler, is a grease dispensing unit that has been developed to provide efficient, and reliable quality performance. This grease pump is specifically used to meter lubrication of roller bearings. It is available on pneumatic, manual, or electrically driven versions.
It has a maximum metering range from 10 cm3 and up to 133 cm3 per stroke. It has several parts: a cover, a piston, a metering valve, a 2.5 meter long hose that which connects the valve and the pump, and as well as a metering pistol.
It has a maximum metering range from 10 cm3 and up to 133 cm3 per stroke. It has several parts: a cover, a piston, a metering valve, a 2.5 meter long hose that which connects the valve and the pump, and as well as a metering pistol.
Lubrication pump / manual -
This product, which is manufactured by Schaeffler, is a lever grease gun that has been developed to be used to relubricate...
Lubrication pump / manual -
This product, which is manufactured by Schaeffler, is a lever grease gun that has been developed to be used to relubricate rolling bearings manually through lubrication nipples. It has a compact design, and it has a vessel that can be filled up to 500 g of loose grease. The unit can also use a 400 g cartridge that is DIN 1284 compliant.
A reinforced hose with a hydraulic grip coupling links the grease gun to the lubrication nipple which meets the requirements for DIN 71412.
A reinforced hose with a hydraulic grip coupling links the grease gun to the lubrication nipple which meets the requirements for DIN 71412.
Piston pump / pneumatic / for lubrication unit - 2", max. 150 psi | LM series
LM Series 3:1 (2" Air Motor) are built with a strong, portable, modern design with 50% lesser components...
Piston pump / pneumatic / for lubrication unit - 2", max. 150 psi | LM series
LM Series 3:1 (2" Air Motor) are built with a strong, portable, modern design with 50% lesser components for piston pump function, with a solid, durable housing for enhanced reliability and functionality. This motor operates at minimal service time even without special tools for pump in-line (3:1 pumps). LM Series 3:1 (2" Air Motor) are suitable for pumping various liquids such as gear and motor oil, and transmission fluid.
Piston pump / pneumatic / for lubrication unit - 3", max. 150 psi | LM series
The LM Series by Ingersoll Rand is a 3 inch diameter air motor thunder piston pump which is simple and has a durable design by eradicating...
Piston pump / pneumatic / for lubrication unit - 3", max. 150 psi | LM series
The LM Series by Ingersoll Rand is a 3 inch diameter air motor thunder piston pump which is simple and has a durable design by eradicating trip rods or push pins. It is ideally used for pumping motor oil, gear oil, or transmission fluid. The advanced design made it to be a self-service maintenance with 50% less parts and has a lower service time, especially there is no need for special tools to service pump in-line. Also, it is very reliable because it offers a stall-free, ice-free air motor & tough, durable housing to improve pump.
Piston pump / for lubrication unit - 2" - 3" | LP series
LP Packages offer useful oil pump packages built in a plain, sturdy piston pump design...
Piston pump / for lubrication unit - 2" - 3" | LP series
LP Packages offer useful oil pump packages built in a plain, sturdy piston pump design enabling reliable service for any user or certified technician. These packages are comprised of various components such as dolly, control handle, meter, drum cover, hose, and valve, available in 3:1/5:1 ratios, and 2", 3" air motors.
Piston pump / for lubrication unit - 4 1/4" | 425 series
The Ingersoll Rand releases standard 55 gallon drums integrated with wall mounting...
Piston pump / for lubrication unit - 4 1/4" | 425 series
The Ingersoll Rand releases standard 55 gallon drums integrated with wall mounting applications. It is possible to wall mount this to any size drum. The 424 series of pumps released by the company use 4–1/4” air motor to pump products featuring 9:1 ratio. They meet industrial applications and delivers silent operation.