+7 (812) 645-08-06
Centralized lubrication systems
select brand
Elevator lubrication system
Elevator lubrication with simalube
The guide rails on elevators need to be permanently lubricated in order to prevent dry friction. By dispensing precisely the right amount of lubricant, the
simalube lubrication system reduces...
The guide rails on elevators need to be permanently lubricated in order to prevent dry friction. By dispensing precisely the right amount of lubricant, the
simalube lubrication system reduces...
Elevator lubrication system
Elevator lubrication with simalube
The guide rails on elevators need to be permanently lubricated in order to prevent dry friction. By dispensing precisely the right amount of lubricant, the
simalube lubrication system reduces the need for maintenance and cleaning work on the elevator cabin and shaft. It is therefore also a particularly good system to use on maintenance-intensive elevators installed on the outside of buildings and on panoramic elevators.
Guide rail
The simalube lubrication system is the optimal solution for the guide rail. It protects the rail with a constant film of oil and cleans it at the same time.
The simalube elevator brush set is fixed directly to the elevator roof or the
guide rail shoe.
Traction cables
The traction cables on elevators can also be easily lubricated using the
simalube lubricator set. These units can be screwed directly on to the brush
set.
The guide rails on elevators need to be permanently lubricated in order to prevent dry friction. By dispensing precisely the right amount of lubricant, the
simalube lubrication system reduces the need for maintenance and cleaning work on the elevator cabin and shaft. It is therefore also a particularly good system to use on maintenance-intensive elevators installed on the outside of buildings and on panoramic elevators.
Guide rail
The simalube lubrication system is the optimal solution for the guide rail. It protects the rail with a constant film of oil and cleans it at the same time.
The simalube elevator brush set is fixed directly to the elevator roof or the
guide rail shoe.
Traction cables
The traction cables on elevators can also be easily lubricated using the
simalube lubricator set. These units can be screwed directly on to the brush
set.
MQL lubrication unit / minimal quantity - max. 6 bar | MiQueL EXT
EASILY ENGINEER DISTRIBUTED AIR-OIL MQL SYSTEMS WITH MIQUEL-EXT MAINTAINING CONTINUOUS AND PERFECT AIR/OIL LUBRICATION
Specifications:
- Pumping...
Specifications:
- Pumping...
MQL lubrication unit / minimal quantity - max. 6 bar | MiQueL EXT
EASILY ENGINEER DISTRIBUTED AIR-OIL MQL SYSTEMS WITH MIQUEL-EXT MAINTAINING CONTINUOUS AND PERFECT AIR/OIL LUBRICATION
Specifications:
- Pumping...
Specifications:
- Pumping...
MQL lubrication unit / minimal quantity - 0 - 2 cc/min, 1 - 3 L | MiQueL
MiQueL, the new air –oil modular system for near dry machining lubrication, the alternative to traditional machining techniques that utilize coolant or pure oil.
The aim of near dry machining is to replace traditional coolant and pure oil flood systems in a machining environment with an accurately controlled compressed air stream...
The aim of near dry machining is to replace traditional coolant and pure oil flood systems in a machining environment with an accurately controlled compressed air stream...
MQL lubrication unit / minimal quantity - 0 - 2 cc/min, 1 - 3 L | MiQueL
MiQueL, the new air –oil modular system for near dry machining lubrication, the alternative to traditional machining techniques that utilize coolant or pure oil.
The aim of near dry machining is to replace traditional coolant and pure oil flood systems in a machining environment with an accurately controlled compressed air stream...
The aim of near dry machining is to replace traditional coolant and pure oil flood systems in a machining environment with an accurately controlled compressed air stream...
MQL lubrication unit / minimal quantity - 4 - 8 bar | MKD Dual
The MKD-Dual minimal lubrication system represents the first step towards the world of near-dry machining by using the leading air-oil aerosol technology.
Designed in particular for internal lubrication processes, this exclusive unit can generate a thin film of aerosol mixture which is brought directly to the tool cutting point by using the existing fluid distribution channels...
Designed in particular for internal lubrication processes, this exclusive unit can generate a thin film of aerosol mixture which is brought directly to the tool cutting point by using the existing fluid distribution channels...
MQL lubrication unit / minimal quantity - 4 - 8 bar | MKD Dual
The MKD-Dual minimal lubrication system represents the first step towards the world of near-dry machining by using the leading air-oil aerosol technology.
Designed in particular for internal lubrication processes, this exclusive unit can generate a thin film of aerosol mixture which is brought directly to the tool cutting point by using the existing fluid distribution channels found on most machines.
The auto-regulation is one of the key characteristics of MKD-Dual you will not find on other aerosol generators for near dry machining.
Dual Venturi based aersol generator will automatically compensate when going from one size of tool to another avoiding the deterioration of the aerosol quality that is found when varying the linear velocity of air through the Venturi.
MKD-Dual therefore optimises the process through an automatic adjustment of the micro-oil mist depending on the air flow - this means best aerosol quality throughout the different sizes of cutting tool and a considerable time saving on initial setup (no complex regulation).
MKD-Dual has been designed mainly for mid-high range applications- this sophisticated technology of generating an ultra thin aerosol with sub micron particle size allows the mixture to flow through the spindle during rotation at high speeds minimizing the effects of centrifugal force on the aerosol avoiding deterioration.
The Dual unit is provided with two outlets which can be supplied with electro-pneumatically controlled ball valves.
Designed in particular for internal lubrication processes, this exclusive unit can generate a thin film of aerosol mixture which is brought directly to the tool cutting point by using the existing fluid distribution channels found on most machines.
The auto-regulation is one of the key characteristics of MKD-Dual you will not find on other aerosol generators for near dry machining.
Dual Venturi based aersol generator will automatically compensate when going from one size of tool to another avoiding the deterioration of the aerosol quality that is found when varying the linear velocity of air through the Venturi.
MKD-Dual therefore optimises the process through an automatic adjustment of the micro-oil mist depending on the air flow - this means best aerosol quality throughout the different sizes of cutting tool and a considerable time saving on initial setup (no complex regulation).
MKD-Dual has been designed mainly for mid-high range applications- this sophisticated technology of generating an ultra thin aerosol with sub micron particle size allows the mixture to flow through the spindle during rotation at high speeds minimizing the effects of centrifugal force on the aerosol avoiding deterioration.
The Dual unit is provided with two outlets which can be supplied with electro-pneumatically controlled ball valves.
Central lubrication system / air/oil - 4 - 8 bar, 1 - 3 L | VIP4Tools
A Complete range of components, lubricants and accessories to realise your solution for Air/Oil and Dry Machining Applications
Specifications:
- Operating Air Pressure: 5 ÷ 8 bar (74 ÷ 118 psi)
- Operating Temperature: -10 ÷ +80 °C (14°F ÷ 176°F)
- Humidity: 90% max
- Lubricants: Dropsa LRT Oils
- Level Switch, Max Load: 50 W
- Level Switch,...
Specifications:
- Operating Air Pressure: 5 ÷ 8 bar (74 ÷ 118 psi)
- Operating Temperature: -10 ÷ +80 °C (14°F ÷ 176°F)
- Humidity: 90% max
- Lubricants: Dropsa LRT Oils
- Level Switch, Max Load: 50 W
- Level Switch,...
Central lubrication system / air/oil - 4 - 8 bar, 1 - 3 L | VIP4Tools
A Complete range of components, lubricants and accessories to realise your solution for Air/Oil and Dry Machining Applications
Specifications:
- Operating Air Pressure: 5 ÷ 8 bar (74 ÷ 118 psi)
- Operating Temperature: -10 ÷ +80 °C (14°F ÷ 176°F)
- Humidity: 90% max
- Lubricants: Dropsa LRT Oils
- Level Switch, Max Load: 50 W
- Level Switch,...
Specifications:
- Operating Air Pressure: 5 ÷ 8 bar (74 ÷ 118 psi)
- Operating Temperature: -10 ÷ +80 °C (14°F ÷ 176°F)
- Humidity: 90% max
- Lubricants: Dropsa LRT Oils
- Level Switch, Max Load: 50 W
- Level Switch,...
Central lubrication system / air/oil - 4 - 8 bar, 1 L | VIP4Chain
The economical, clean and precise way to apply lubricant to chain or conveyor systems. Precise, controllable dispensing function
Specifications:
- Operating Voltage: 24 Vdc 110 Vac
- Power Consumption: 10 W
- Air Input Pressure: 5 ÷ 8 bar
- Remote Alarm Signal: RELAY signal max 250 V 1 A N.O./N.C.
- Operating Temperature: -5 ÷ +55 °C
- Max. Working...
Specifications:
- Operating Voltage: 24 Vdc 110 Vac
- Power Consumption: 10 W
- Air Input Pressure: 5 ÷ 8 bar
- Remote Alarm Signal: RELAY signal max 250 V 1 A N.O./N.C.
- Operating Temperature: -5 ÷ +55 °C
- Max. Working...
Central lubrication system / air/oil - 4 - 8 bar, 1 L | VIP4Chain
The economical, clean and precise way to apply lubricant to chain or conveyor systems. Precise, controllable dispensing function
Specifications:
- Operating Voltage: 24 Vdc 110 Vac
- Power Consumption: 10 W
- Air Input Pressure: 5 ÷ 8 bar
- Remote Alarm Signal: RELAY signal max 250 V 1 A N.O./N.C.
- Operating Temperature: -5 ÷ +55 °C
- Max. Working...
Specifications:
- Operating Voltage: 24 Vdc 110 Vac
- Power Consumption: 10 W
- Air Input Pressure: 5 ÷ 8 bar
- Remote Alarm Signal: RELAY signal max 250 V 1 A N.O./N.C.
- Operating Temperature: -5 ÷ +55 °C
- Max. Working...
Minimal quantity lubrication unit / MQL - UCGF
RESERVOIR 1.2 L
LOW LEVEL SWITCH: 1 A 250 VAC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M...
LOW LEVEL SWITCH: 1 A 250 VAC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M...
Minimal quantity lubrication unit / MQL - UCGF
RESERVOIR 1.2 L
LOW LEVEL SWITCH: 1 A 250 VAC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
BOX ABS WITH TRANSPARAIT FRONT DOOR
SOLENOID VALVE 24 VDC-24 VAC-115 VAC OR 230 VAC
THE VOLTAGE HAS TO BE ADD TO THE CODE EXAMPLE
70.000.0.24VDC
AIR REGULATOR + PRESSURE GAUGE
FREQUENCY GENERATOR
LOW LEVEL SWITCH: 1 A 250 VAC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
BOX ABS WITH TRANSPARAIT FRONT DOOR
SOLENOID VALVE 24 VDC-24 VAC-115 VAC OR 230 VAC
THE VOLTAGE HAS TO BE ADD TO THE CODE EXAMPLE
70.000.0.24VDC
AIR REGULATOR + PRESSURE GAUGE
FREQUENCY GENERATOR
MQL lubrication unit / minimal quantity - UCGF‐SE
RESERVOIR 1.2 L
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50...
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50...
MQL lubrication unit / minimal quantity - UCGF‐SE
RESERVOIR 1.2 L
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
BOXABS WITH TRANSPARENT FRONT DOOR
AIR REGULATOR + PRESSURE GAUGE
FREQUENCY GENERATOR
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
BOXABS WITH TRANSPARENT FRONT DOOR
AIR REGULATOR + PRESSURE GAUGE
FREQUENCY GENERATOR
MQL lubrication unit / minimal quantity - AGGF
RESERVOIR 1.2 L
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM...
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM...
MQL lubrication unit / minimal quantity - AGGF
RESERVOIR 1.2 L
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
SOLENOID VALVE 24 VDC-24 VAC-115 VAC OR 230 VAC
THE VOLTAGE HAS TO BE ADD TO THE CODE EXAMPLE
70.006.0.24VDC
AIR REGULATOR
FREQUENCY GENERATOR
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM 1T0 6
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
SOLENOID VALVE 24 VDC-24 VAC-115 VAC OR 230 VAC
THE VOLTAGE HAS TO BE ADD TO THE CODE EXAMPLE
70.006.0.24VDC
AIR REGULATOR
FREQUENCY GENERATOR
MQL lubrication unit / minimal quantity - MC‐EL‐3P‐4P‐5P‐6P‐7P
THE UNIT IS SUPPLIED COMPLETE OF:_
RESERVOIR 1.2 LOR 2.2 L_
LOW LEVEL...
RESERVOIR 1.2 LOR 2.2 L_
LOW LEVEL...
MQL lubrication unit / minimal quantity - MC‐EL‐3P‐4P‐5P‐6P‐7P
THE UNIT IS SUPPLIED COMPLETE OF:_
RESERVOIR 1.2 LOR 2.2 L_
LOW LEVEL SWITCH: 1 A 250 V AC 200 VDC50W
3-4-5-6-7 PUMPS_
5 M COAXIAL LINES FOR EACH OUTLET (6 MM - 2.5 MM)
METALLIC BOX_
SOLENOID VALVE_
AIR REGULATOR_
FREQUENCY GENERATOR_
AIR REDUCER + GAUGE
RESERVOIR 1.2 LOR 2.2 L_
LOW LEVEL SWITCH: 1 A 250 V AC 200 VDC50W
3-4-5-6-7 PUMPS_
5 M COAXIAL LINES FOR EACH OUTLET (6 MM - 2.5 MM)
METALLIC BOX_
SOLENOID VALVE_
AIR REGULATOR_
FREQUENCY GENERATOR_
AIR REDUCER + GAUGE
MQL lubrication unit / minimal quantity - MC‐EL‐2P
RESERVOIR 1.2 LOR 2.2 L
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS...
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS...
MQL lubrication unit / minimal quantity - MC‐EL‐2P
RESERVOIR 1.2 LOR 2.2 L
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM 1 TO 2
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
METALLIC BOX
THE SOLENOID VALVE HAS TO BE ORDERED SEPARATELY
CODE 14.660.0
AIR REGULATOR
AIR REDUCER + GAUGE
FREQUENCY GENERATOR
LOW LEVEL SWITCH: 1 A 250 V AC 200 V DC 50 W
PUMPS FROM 1 TO 2
5 M COAXIAL FEEDING LINES FOR EACH OUTLET (6 MM - 2.5
MM)
METALLIC BOX
THE SOLENOID VALVE HAS TO BE ORDERED SEPARATELY
CODE 14.660.0
AIR REGULATOR
AIR REDUCER + GAUGE
FREQUENCY GENERATOR