+7 (812) 645-08-06
Automatic lubricators
select brand
Automatic lubricator - CSK
Designed for grease lubrication and driven by a DC motor, this lubricator is ideal for single line systems. There is a built-in controller which controls...
Automatic lubricator - CSK
Designed for grease lubrication and driven by a DC motor, this lubricator is ideal for single line systems. There is a built-in controller which controls the pump to delivers the rated amount of lubricant to the lubrication point at the right time. Each pump outlet has an over pressure protection valve and each outlet can support a lubrication system independently.
Function
Driven by a DC motor, CSK drives a worm and worm wheel which in turn rotates the an eccentric wheel which drives the piston back and forth, the lubricant is drawn into the pump body and is then discharged at the outlet.
Function
Driven by a DC motor, CSK drives a worm and worm wheel which in turn rotates the an eccentric wheel which drives the piston back and forth, the lubricant is drawn into the pump body and is then discharged at the outlet.
Multi-point lubricator / motor-driven / automatic - multiport
The motor-driven MultiPort lubricator is a rugged, compact, low voltage DC lubricator. It is equipped with a fixed output...
Multi-point lubricator / motor-driven / automatic - multiport
The motor-driven MultiPort lubricator is a rugged, compact, low voltage DC lubricator. It is equipped with a fixed output pumping element to discharge grease over a wide operating range. An optional adjustable output element and low level switch is available.
The MultiPort automatic lubricator is available in oil and grease versions. Electronic controllers are available to program lubricator. Recommended for use with Series Progressive lubricating systems.
The MultiPort automatic lubricator is available in oil and grease versions. Electronic controllers are available to program lubricator. Recommended for use with Series Progressive lubricating systems.
Multi-point lubricator / automatic - 3600 psi
Application
With a small installation footprint, the 12 or 24 VDC MultiPort Mobile Lubricator is a robust and economical solution for mobile equipment. The lubricator...
Multi-point lubricator / automatic - 3600 psi
Application
With a small installation footprint, the 12 or 24 VDC MultiPort Mobile Lubricator is a robust and economical solution for mobile equipment. The lubricator can pump up to NLGI grade 2 grease at pressures up to 3600 psi (248 bar). Inside the reservoir, a mixing arm with wedge plate prevents air intrusion and facilitates proper grease distribution. This lubricator is normally used with the SMDC Controller providing accurate lubrication intervals.
Lubricator is available in progressive and injector versions.
Features
Mixing arm with wedge plate prevents air intrusion
Compact size
Simple, robust design ideal for harsh environments
With a small installation footprint, the 12 or 24 VDC MultiPort Mobile Lubricator is a robust and economical solution for mobile equipment. The lubricator can pump up to NLGI grade 2 grease at pressures up to 3600 psi (248 bar). Inside the reservoir, a mixing arm with wedge plate prevents air intrusion and facilitates proper grease distribution. This lubricator is normally used with the SMDC Controller providing accurate lubrication intervals.
Lubricator is available in progressive and injector versions.
Features
Mixing arm with wedge plate prevents air intrusion
Compact size
Simple, robust design ideal for harsh environments
Automatic lubricator - TTN
Application
TTN Lubricators are ideally suited for both on-road transport vehicles and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in hostile...
Automatic lubricator - TTN
Application
TTN Lubricators are ideally suited for both on-road transport vehicles and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in hostile conditions found on remote sections of highways and in industries, such as construction, mining and forestry. A unique reservoir design keeps out contamination and prevents condensation from forming, thus assuring reliable automatic lubrication of critical wear points such as bearings, bushings and pins.
Features
Large reservoir capacities allow for extended times between refills
Low grease level and system monitoring capabilities
Designed to handle a wide range of lubricants
Unique reservoir design keeps grease free from contaminants
Integral controller option facilitates quick install
Primary industries
Mobile
Wind Power
TTN Lubricators are ideally suited for both on-road transport vehicles and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in hostile conditions found on remote sections of highways and in industries, such as construction, mining and forestry. A unique reservoir design keeps out contamination and prevents condensation from forming, thus assuring reliable automatic lubrication of critical wear points such as bearings, bushings and pins.
Features
Large reservoir capacities allow for extended times between refills
Low grease level and system monitoring capabilities
Designed to handle a wide range of lubricants
Unique reservoir design keeps grease free from contaminants
Integral controller option facilitates quick install
Primary industries
Mobile
Wind Power
Automatic lubricator - Dynamis
The Dynamis Lubricator has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system,...
Automatic lubricator - Dynamis
The Dynamis Lubricator has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be used not only for wind power stations but also in industry, in commercial vehicle lubrication and in spraying lubrication.
Product Characteristics
Pump for single-line, progressive and spray systems in wind power stations and for industrial applications
Lubricant: grease, liquid grease up to NLGI class 2
Discharge pressure max. 300 bar
Advantages
easy installation with re-integrated distributor and control
easy monitoring of all functions
robust and reliable even when used in vertically rotating systems
energy-saving
Product Characteristics
Pump for single-line, progressive and spray systems in wind power stations and for industrial applications
Lubricant: grease, liquid grease up to NLGI class 2
Discharge pressure max. 300 bar
Advantages
easy installation with re-integrated distributor and control
easy monitoring of all functions
robust and reliable even when used in vertically rotating systems
energy-saving