+7 (812) 645-08-06
Machine tool vises
select brand
Machine tool vise / pneumatic
The air operated clamps, manufactured by Analog, is made to ensure a stable pressure on samples to avoid slippage.
Precision vise - 1 - 40 mm
The Food Technology Corporation provides the TMS Mini Sample Vice, equipped with an adjustable support plate with 2 x “T” bolt fixings. The...
Precision vise - 1 - 40 mm
The Food Technology Corporation provides the TMS Mini Sample Vice, equipped with an adjustable support plate with 2 x “T” bolt fixings. The tool is suitable for use in performing puncture and penetration, and breaking tests on smaller samples. The device can also be applied in sample three-point bend tests on tablets.
This equipment has adjustable two vice jaws placed on a base plate which strongly hold the sides of regular shaped samples, between 1 mm and 40 mm in width. In addition, this sample vice is supplied with a perspex knife edge to enable three-point bend testing.
This equipment has adjustable two vice jaws placed on a base plate which strongly hold the sides of regular shaped samples, between 1 mm and 40 mm in width. In addition, this sample vice is supplied with a perspex knife edge to enable three-point bend testing.
5-axis machine tool vise - FT 02063
The FT 02063 CentroClamp from Ftool International has a five-axis machining center which can be manually or automatically loaded. The instrument can accommodate various types and sizes of workpieces...
5-axis machine tool vise - FT 02063
The FT 02063 CentroClamp from Ftool International has a five-axis machining center which can be manually or automatically loaded. The instrument can accommodate various types and sizes of workpieces for applications in different fields.
If the machining process occurs on the center of the production machine's operation range, the programming is significantly simplified. The unit features a short changeover time, enhanced flexibility, fast component changes, and improved production output.
The suggested tightening torque for the unit is at 60Nm. It works with a maximum clamping power of 18 kN and a repeatability of +/-- 0.01 mm. The clamp can travel a distance of 0 to 38 mm, while the grid dimension jaw can be adjusted to up to 12 mm.
If the machining process occurs on the center of the production machine's operation range, the programming is significantly simplified. The unit features a short changeover time, enhanced flexibility, fast component changes, and improved production output.
The suggested tightening torque for the unit is at 60Nm. It works with a maximum clamping power of 18 kN and a repeatability of +/-- 0.01 mm. The clamp can travel a distance of 0 to 38 mm, while the grid dimension jaw can be adjusted to up to 12 mm.