+7 (812) 645-08-06
Rolling machines, Rolling mills
select brand
Pneumatic plate bending machine / with 4 rollers - HI- TECH
Automatic bending plant used with all our hi-tech machines
Complete with automatic ejector
Complete with automatic ejector
Hydraulic plate bending machine / with 4 rollers - 2 - 100 mm | 4RH NC
Hydraulic 4 rolls plate bending machine with double pre-bending
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 100 mm
Machine fully hydraulic
Frame work with CNC machines
Size of hydraulic system and...
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 100 mm
Machine fully hydraulic
Frame work with CNC machines
Size of hydraulic system and...
Hydraulic plate bending machine / with 4 rollers - 2 - 100 mm | 4RH NC
Hydraulic 4 rolls plate bending machine with double pre-bending
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 100 mm
Machine fully hydraulic
Frame work with CNC machines
Size of hydraulic system and components, including hydraulic pistons, higher than necessary to reduce the pressure of work and have a longer life
Nr. 2 hydraulic motors coupled to planetary gear for rotation of the two central rolls
Hardened rolls
Separate control desk on wheels
Push buttons control the parallel movements of side rolls and rotation
Hydraulic opening of shoulder by control desk
Hydraulic parallelism of lateral and pinching rolls managed by plc and proportional valve
Hydraulic inclination of lateral rolls for conical bending directly from control desk through selectors
Adjustment of the pinching by regulator and pressure gauge with a special outside switch on the machine
Numerical Control for automatic production
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 100 mm
Machine fully hydraulic
Frame work with CNC machines
Size of hydraulic system and components, including hydraulic pistons, higher than necessary to reduce the pressure of work and have a longer life
Nr. 2 hydraulic motors coupled to planetary gear for rotation of the two central rolls
Hardened rolls
Separate control desk on wheels
Push buttons control the parallel movements of side rolls and rotation
Hydraulic opening of shoulder by control desk
Hydraulic parallelism of lateral and pinching rolls managed by plc and proportional valve
Hydraulic inclination of lateral rolls for conical bending directly from control desk through selectors
Adjustment of the pinching by regulator and pressure gauge with a special outside switch on the machine
Numerical Control for automatic production
Automatic plate bending machine / with 4 rollers - HI- TECH
4 Rolls plate bending machine with initial pre-bend - bending - final pre-bend all in...
Automatic plate bending machine / with 4 rollers - HI- TECH
4 Rolls plate bending machine with initial pre-bend - bending - final pre-bend all in one stroke
Hardened and ground rolls
Pneumatic piston for sheet pinching
Manual feeding support table with square alignement
Shoulder opening with pneumatic piston
Bending process without unbent parts even with small diameters
Hardened and ground rolls
Pneumatic piston for sheet pinching
Manual feeding support table with square alignement
Shoulder opening with pneumatic piston
Bending process without unbent parts even with small diameters
Hydraulic plate bending machine / with 2 rollers - HI-TECH
Machine fully hydraulic which let an automatic production cycle: initial pre-bending-rotation-final pre-bending-open machine
Fast times of productions:...
Fast times of productions:...
Hydraulic plate bending machine / with 2 rollers - HI-TECH
Machine fully hydraulic which let an automatic production cycle: initial pre-bending-rotation-final pre-bending-open machine
Fast times of productions: till 4-6 pieces per minute
Precision in production
Possibility to put the machine in automatic lines
Steel top roll and motorized bottom roll made of Polyurethane
Perfect circular shape in just one passage
Fast connection of top roll
Feeding table with alignement square
Special rolls for small diameter, till 80mm
Special Flex-Roll for easy change of diameter through adjustment (from 125 to 450mm diameters)
Fast times of productions: till 4-6 pieces per minute
Precision in production
Possibility to put the machine in automatic lines
Steel top roll and motorized bottom roll made of Polyurethane
Perfect circular shape in just one passage
Fast connection of top roll
Feeding table with alignement square
Special rolls for small diameter, till 80mm
Special Flex-Roll for easy change of diameter through adjustment (from 125 to 450mm diameters)
Hydraulic plate bending machine / with 4 rollers - 2 - 25 mm | 4RH
Hydraulic 4 rolls plate bending machine with double pre-bending
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 25 mm
Machine fully hydraulic
Frame work with...
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 25 mm
Machine fully hydraulic
Frame work with...
Hydraulic plate bending machine / with 4 rollers - 2 - 25 mm | 4RH
Hydraulic 4 rolls plate bending machine with double pre-bending
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 25 mm
Machine fully hydraulic
Frame work with CNC machines
Size of the hydraulic system and components, including hydraulic piston, higher than necessary to reduce the pressure of work and have a longer life
Nr. 2 hydraulic motors coupled to planetary gear for rotation of the two central rollers
Hardened rolls
Separate control desk on wheels
Push buttons control the parallel movements of side rolls and rotation
Hydraulic parallelism of lateral rolls
Hydraulic opening of shoulder by control desk
Adjustement of the pinching by regulator and pressure gauge with a special outside switch on the machine
Useful lenght from 1000 up to 6000 mm
Thickness from 2 up to 25 mm
Machine fully hydraulic
Frame work with CNC machines
Size of the hydraulic system and components, including hydraulic piston, higher than necessary to reduce the pressure of work and have a longer life
Nr. 2 hydraulic motors coupled to planetary gear for rotation of the two central rollers
Hardened rolls
Separate control desk on wheels
Push buttons control the parallel movements of side rolls and rotation
Hydraulic parallelism of lateral rolls
Hydraulic opening of shoulder by control desk
Adjustement of the pinching by regulator and pressure gauge with a special outside switch on the machine
Thread rolling machine - 3R-21 TRC
The Three DIE Machine is designed to produce 21 tons of smashing power. The device...
Thread rolling machine - 3R-21 TRC
The Three DIE Machine is designed to produce 21 tons of smashing power. The device enables to form up to 5 mm pitch screws, train rail bolts, knurls and splines all in a shorter time when compared to machining.
With special construction, this machine is used for special production of train rail bolt with hot forming.
With special construction, this machine is used for special production of train rail bolt with hot forming.
Thread rolling machine - HK-85
The Two DIE Machine is designed and developed to produce 85 tons of smashing power. It...
Thread rolling machine - HK-85
The Two DIE Machine is designed and developed to produce 85 tons of smashing power. It enables to form up to 10 mm pitch screws, knurls and splines in a shorter time when compared to machining.
machine which produces 85 tons of rolling force, you can form up to 10 mm pitch screws, knurls and splines in a shorter time than machining.
machine which produces 85 tons of rolling force, you can form up to 10 mm pitch screws, knurls and splines in a shorter time than machining.
Thread rolling machine - 3R-15
With our 3 die cylindrical thread rolling machine which produces 15 tons of rolling force, you can form up to 1.75 mm pitch screws, knurls and splines in a shorter time than machining.
Thread rolling machine - ROT-1
With sophisticated design and modern concepts, this fully automated thread rolling machine is perfect...
Thread rolling machine - ROT-1
With sophisticated design and modern concepts, this fully automated thread rolling machine is perfect for mass production of ball-studs. The machine allows for simultaneous burnishing and threading of ball-studs as well.
Fully automated GOM ROT-1 new design for producing ball studs and making the both threading and burnishing processes automatically at the same time
Fully automated GOM ROT-1 new design for producing ball studs and making the both threading and burnishing processes automatically at the same time
Thread rolling machine - HK-3
The HK-3 is a rolling machine with two relays, manufactured by Gokcuoglu. This unit is capable of producing up to 3tons of smashing power,...
Thread rolling machine - HK-3
The HK-3 is a rolling machine with two relays, manufactured by Gokcuoglu. This unit is capable of producing up to 3tons of smashing power, with the two relay machines of various kinds. This unit has a role diameter of 40mm, with role length of 60mm and cylinder course of 0-60mm. This apparatus operates with a main engine that functions at 4kW.
With our 2 die cylindrical thread rolling machine which produces 3 tons of rolling force, you can form up to 1.5 mm pitch screws, knurls and splines in a shorter time than machining.
With our 2 die cylindrical thread rolling machine which produces 3 tons of rolling force, you can form up to 1.5 mm pitch screws, knurls and splines in a shorter time than machining.
Rolling mill - GPO
The GPO series offers a wide array of rolling mills that are especially designed for steel and non-ferrous metals. Otherwise known as gearboxes, the GPO series are best used for roll stands and are equipped with shears.
Rolling mill line hot - AGMA - DIN
This hot rolling mill line is developed by CAT. It is specifically designed in accordance with the AGMA or DIN standards. This mill...
Rolling mill line hot - AGMA - DIN
This hot rolling mill line is developed by CAT. It is specifically designed in accordance with the AGMA or DIN standards. This mill line was made with the use of most advanced calculation and drawing systems also from CAT. The CAT is capable of manufacturing any type of shear, flying, brake and clutch as well as cold cutting shears. They have acquired enough experience making them provide suitable machines in any type of cut. In addition, flywheels and parallelogram arms allows versatility in designing machines.
Rolling mill line hot - pinch roll
The pinch roll hot rolling mill line is constructed with a repeater box, a pinch roll attached with spheroid cast iron rolls and 2 universal...
Rolling mill line hot - pinch roll
The pinch roll hot rolling mill line is constructed with a repeater box, a pinch roll attached with spheroid cast iron rolls and 2 universal shafts with required connection sleeves. This hot rolling mill line is also built with entry and exit guides as well as a funnel and a bedplate that is designed to position the motor-gearbox -pinch roll or tail braker. It is integrated with a single pneumatic piston that is positioned on the roll support arm. This device regulates the upper roll therefor allowing the bar to be pressed.
