+7 (812) 645-08-06
Punching machines
select brand
Hydraulic punching head - LSK-300
Hydraulic punching head for punching conductor bars and rails; the hydraulic punch is used by energy providers, utility companies and their service providers, particularly in the field of...
Hydraulic punching head - LSK-300
Hydraulic punching head for punching conductor bars and rails; the hydraulic punch is used by energy providers, utility companies and their service providers, particularly in the field of switch cabinet and plant engineering and construction.
This hydraulic punching head is for punching copper conductor bars and rails made of aluminium, brass or steel in the centre up to a rail width of 140 mm.
The long tool life and low maintenance makes it a robust and reliable tool.
The hydraulic punching head is intended for connecting to a separate hydraulic pump.
Diameter: 6 - 20.5 mm; crimping force: 300 kN; weight: 13 kg; dimensions: 360 x 210 x 95 mm; material thickness steel: max. 13 mm; material thickness stainless steel: max. 6 mm
This hydraulic punching head is for punching copper conductor bars and rails made of aluminium, brass or steel in the centre up to a rail width of 140 mm.
The long tool life and low maintenance makes it a robust and reliable tool.
The hydraulic punching head is intended for connecting to a separate hydraulic pump.
Diameter: 6 - 20.5 mm; crimping force: 300 kN; weight: 13 kg; dimensions: 360 x 210 x 95 mm; material thickness steel: max. 13 mm; material thickness stainless steel: max. 6 mm
Hydraulic punching head - 6,5 - 17 mm | LSK-160
LSK-160 Punching head is ideally used for punching copper conductor bars and also aluminum,...
Hydraulic punching head - 6,5 - 17 mm | LSK-160
LSK-160 Punching head is ideally used for punching copper conductor bars and also aluminum, brass and steel rails. The punching is done in the center with a rail width of up to 55mm. The punching head is noted for its durability, robust construction, intelligent design and maintenance-free operation. Users can connect a separate hydraulic pump to this device.
Manual punching machine - max. ø 85 mm | Compact
ALFRA's Compact is a manual punching machine which has no hose and cylinder. This hand-operated...
Manual punching machine - max. ø 85 mm | Compact
ALFRA's Compact is a manual punching machine which has no hose and cylinder. This hand-operated punching machine is suitable for workshop and assembly. The punching capacity of Compact depend on the geometric form. For circular holes, the capacity is up to 82 mm; square holes up to 68 x 68 mm; and, rectangular holes up to 46 x 86 mm.
Bus bar cutting machine / belter / punching machine - 120 x 12 mm
Alfra Tools' Busbar Bending and Punching Machines with universal working cylinders are capable of easy bending via punch insertion (holes of Ø 6.6 up to 21.5 mm and oblong holes can be...
Bus bar cutting machine / belter / punching machine - 120 x 12 mm
Alfra Tools' Busbar Bending and Punching Machines with universal working cylinders are capable of easy bending via punch insertion (holes of Ø 6.6 up to 21.5 mm and oblong holes can be...
Bus bar cutting machine / punching machine / belter - 120 x 12 mm | LPV
This machine consists of a main frame that features a box aluminum design complete with a receptable for the basic casing. The height supports correlate to the rollers for bending and punching and can be interchaged seamlessly....
Bus bar cutting machine / punching machine / belter - 120 x 12 mm | LPV
This machine consists of a main frame that features a box aluminum design complete with a receptable for the basic casing. The height supports correlate to the rollers for bending and punching and can be interchaged seamlessly. Adding to this, a length stop is offered for hole pattern adjustment apart from the adjustable height. To support working with long copper coils, users can extend the retractable frames complete with support bracket to approximately 700 meters.
All stops and support brackets can be installed extremely fast and easily thanks to the clamping levers. The technical specifications of this machine includes 50 mm smallest length of leg, 100 smallest U bending and 72 mm material depending on thickness. The special parameters are dependent on a CU rail that measures 120 x 10 mm, where punching is 6.6 to 21.5 mm along with a long hole of a maximum 21 mm in length.
All stops and support brackets can be installed extremely fast and easily thanks to the clamping levers. The technical specifications of this machine includes 50 mm smallest length of leg, 100 smallest U bending and 72 mm material depending on thickness. The special parameters are dependent on a CU rail that measures 120 x 10 mm, where punching is 6.6 to 21.5 mm along with a long hole of a maximum 21 mm in length.
Bus bar cutting machine / punching machine / belter - 160 x 12 mm | BS 160 Combi
The BS 160 Combi is a switchboard machining tool manufactured by Alfra. The unit is composed of a base frame that is made out of aluminum and hydraulic cylinder that can reach up to 600 bar....
Bus bar cutting machine / punching machine / belter - 160 x 12 mm | BS 160 Combi
The BS 160 Combi is a switchboard machining tool manufactured by Alfra. The unit is composed of a base frame that is made out of aluminum and hydraulic cylinder that can reach up to 600 bar....
Servo electric punching machine / CNC / free-standing - 200 kN | LINAPUNCH
The LINAPUNCH is a fully electric NC punching machine manufactured by Dimeco Alipresse. The device provides a more productive and flexible operation for demanding sheet metal fabrication...
Servo electric punching machine / CNC / free-standing - 200 kN | LINAPUNCH
The LINAPUNCH is a fully electric NC punching machine manufactured by Dimeco Alipresse. The device provides a more productive and flexible operation for demanding sheet metal fabrication industry. This machine is commonly applicable for metallic furniture or domestic appliances.
This tool features a coil-fed turret machine with SIMOSTAR NC control, which facilitates up to 11 programmable servo axes. This 200KN high-speed press drive systems have a programmable bottom and upper deadpoints. The unit's tools are suited for 4 exchangeable cassettes that may be replaced by Auto-index or Multi-tool programmable rotating dies.
This machine is more dependable with less the reduction energy costs.
This tool features a coil-fed turret machine with SIMOSTAR NC control, which facilitates up to 11 programmable servo axes. This 200KN high-speed press drive systems have a programmable bottom and upper deadpoints. The unit's tools are suited for 4 exchangeable cassettes that may be replaced by Auto-index or Multi-tool programmable rotating dies.
This machine is more dependable with less the reduction energy costs.
Flat profile punching line / automatic - max. 1 000 x 2.5 mm | FLEXIPUNCH
The Flexipunch is a punching line that is ideal for use in producing power cabinets. In the cutting process, the...
Flat profile punching line / automatic - max. 1 000 x 2.5 mm | FLEXIPUNCH
The Flexipunch is a punching line that is ideal for use in producing power cabinets. In the cutting process, the model has a production rate of 80 parts/min and does not produce any burrs onto the slit edges. It has the capacity to create cabinets with widths ranging from 50 mm up to 1,000 mm, and thicknesses ranging from 0.5 mm up to 2.5 mm.
The Flexipunch is capable of stacking up to 12 components of various dimensions.
The Flexipunch is capable of stacking up to 12 components of various dimensions.
Hydraulic punching machine / notching and pipes / for cutting - DECOPUNCH
The hydraulic punching and shearing machine adapts to presswork ranging from coining jewelry...
Hydraulic punching machine / notching and pipes / for cutting - DECOPUNCH
The hydraulic punching and shearing machine adapts to presswork ranging from coining jewelry to forging aircraft parts. New
hydraulic presses are suited to applications where the mechanical press has been traditionally more popular. The punching station includes a pneumatic or hydraulic shear depending on the material thickness, and a servo-feed MICROFEED 1125 E.
hydraulic presses are suited to applications where the mechanical press has been traditionally more popular. The punching station includes a pneumatic or hydraulic shear depending on the material thickness, and a servo-feed MICROFEED 1125 E.
Coil-fed punching machine - DECOPRO®
The DECOPRO® permits the implementation of the Multistep punching technology onto one of the user's existing press. This system contains press ram which holds the selectors. Each press stroke,...
Coil-fed punching machine - DECOPRO®
The DECOPRO® permits the implementation of the Multistep punching technology onto one of the user's existing press. This system contains press ram which holds the selectors. Each press stroke,...