+7 (812) 645-08-06
Centrifugal finishing machines
select brand
Drag finishing machine - PF-SF 120
Drag finisher PF-SF 120
Workpieces are fixed to a series of special mounting attachments on the drag finisher PF-SF 120, and ground or polished by dragging...
Workpieces are fixed to a series of special mounting attachments on the drag finisher PF-SF 120, and ground or polished by dragging...
Drag finishing machine - PF-SF 120
Drag finisher PF-SF 120
Workpieces are fixed to a series of special mounting attachments on the drag finisher PF-SF 120, and ground or polished by dragging...
Workpieces are fixed to a series of special mounting attachments on the drag finisher PF-SF 120, and ground or polished by dragging...
Centrifugal disc finishing machine - PF FT series
PF FT 4/40-60 und PF FT 4/20
Quick results for deburring, edge radiusing, flattening rough surfaces and for high-gloss finishing:
Complete...
Quick results for deburring, edge radiusing, flattening rough surfaces and for high-gloss finishing:
Complete...
Centrifugal disc finishing machine - PF FT series
PF FT 4/40-60 und PF FT 4/20
Quick results for deburring, edge radiusing, flattening rough surfaces and for high-gloss finishing:
Complete process
Large or delicate parts can be fixed for gentle processing
Wet and dry processing are possible concurrently
Fast, all-round processing
Rotational regulation and electronic speed adjustment are optional
Deburring part against part is possible
Stainless steel or synthetic drums
Quick retooling for another job lot
Quick results for deburring, edge radiusing, flattening rough surfaces and for high-gloss finishing:
Complete process
Large or delicate parts can be fixed for gentle processing
Wet and dry processing are possible concurrently
Fast, all-round processing
Rotational regulation and electronic speed adjustment are optional
Deburring part against part is possible
Stainless steel or synthetic drums
Quick retooling for another job lot
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 600, CV 800
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction, the barrels rotate one turn in the opposite...
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 600, CV 800
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction, the barrels rotate one turn in the opposite direction effecting a 1:1 ratio (see Above Figure). With a range of 60 to 180 R.P.M., parts and media are subjected to high centrifugal force that yields finishes 30 to 40 times faster than bowl or tub machines. Not only does this produce superior edge radius, deburring, and polishing, it can also effect stress relief in parts.
Due to the even distribution of media, water, and compound, even delicate parts such as fine jewelry and surgical instruments can be processed without distortion.
Due to the even distribution of media, water, and compound, even delicate parts such as fine jewelry and surgical instruments can be processed without distortion.
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 5000
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction,...
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 5000
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction, the barrels rotate one turn in the opposite direction effecting a 1:1 ratio. With a range of 60 to 180 R.P.M., parts and media are subjected to high centrifugal force that yields finishes 30 to 40 times faster than bowl or tub machines. Not only does this produce superior edge radius, deburring, and polishing, it can also effect stress relief in parts.
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 400
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction,...
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 400
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction, the barrels rotate one turn in the opposite direction effecting a 1:1 ratio. With a range of 60 to 180 R.P.M., parts and media are subjected to high centrifugal force that yields finishes 30 to 40 times faster than bowl or tub machines. Not only does this produce superior edge radius, deburring, and polishing, it can also effect stress relief in parts.
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 2000
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction, the barrels rotate one turn in the opposite...
Centrifugal barrel finishing machine - 60 - 180 rpm | CV 2000
Each machine is equipped with four barrels spaced evenly on the periphery of a turret. As the turret rotates in one direction, the barrels rotate one turn in the opposite direction effecting a 1:1 ratio (see Above Figure). With a range of 60 to 180 R.P.M., parts and media are subjected to high centrifugal force that yields finishes 30 to 40 times faster than bowl or tub machines. Not only does this produce superior edge radius, deburring, and polishing, it can also effect stress relief in parts.
Due to the even distribution of media, water, and compound, even delicate parts such as fine jewelry and surgical instruments can be processed without distortion.
Due to the even distribution of media, water, and compound, even delicate parts such as fine jewelry and surgical instruments can be processed without distortion.
Centrifugal barrel finishing machine - max. 100 rpm | HE series
The Richwood H/E is equipped with 4 barrels, spaced evenly on the periphery of the turret....
Centrifugal barrel finishing machine - max. 100 rpm | HE series
The Richwood H/E is equipped with 4 barrels, spaced evenly on the periphery of the turret. As the turret rotates in one direction, the barrel rotates in the opposite direction, effecting a 1:1 ratio. When rotating the turret at over 60 RPM, the mass in the barrel is subject to high compression and slides to the farthest wall of the barrel.
Centrifugal barrel finishing machine - 47 - 935 l | EMI series
Features :
● Eccentric-Flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer...
● Eccentric-Flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer...
Centrifugal barrel finishing machine - 47 - 935 l | EMI series
Features :
● Eccentric-Flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer system.
●
The processing efficiency is adjustable by frequency inverter.
● Equipped with Germany FLENDER high quality Induction Motor; enable to effectively reduce noise during operation.
● Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
●
Discharger is covered with rubber to resist acid, alkaline, abrading and eliminate work-piece collision during operation.
● Eccentric-Flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer system.
●
The processing efficiency is adjustable by frequency inverter.
● Equipped with Germany FLENDER high quality Induction Motor; enable to effectively reduce noise during operation.
● Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
●
Discharger is covered with rubber to resist acid, alkaline, abrading and eliminate work-piece collision during operation.
Centrifugal barrel finishing machine - 47 - 935 L | PEM Series
Features :
● Eccentric-flow rotating barrel.
● Economic...
● Eccentric-flow rotating barrel.
● Economic...
Centrifugal barrel finishing machine - 47 - 935 L | PEM Series
Features :
● Eccentric-flow rotating barrel.
● Economic type electrical control system.
●
Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
● Eccentric-flow rotating barrel.
● Economic type electrical control system.
●
Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
Centrifugal barrel finishing machine - 193 - 517 l | EMIS series
Features :
● Eccentric-flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer system.
● The...
● Eccentric-flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer system.
● The...
Centrifugal barrel finishing machine - 193 - 517 l | EMIS series
Features :
● Eccentric-flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer system.
● The processing efficiency is adjustable by the frequency inverter.
● Equipped with Germany FLENDER high quality Induction Motor; enable to effectively reduce noise during operation.
● Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
● The work-piece loading capacity and processing efficiency outperform the traditional precision ceramic powder polisher.
●
Additional safety protection net assures operational safety.
● Eccentric-flow rotating barrel.
● Variable shift speed electric control system, circuit breaker, CW/CCW positioning control and timer system.
● The processing efficiency is adjustable by the frequency inverter.
● Equipped with Germany FLENDER high quality Induction Motor; enable to effectively reduce noise during operation.
● Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
● The work-piece loading capacity and processing efficiency outperform the traditional precision ceramic powder polisher.
●
Additional safety protection net assures operational safety.
Centrifugal barrel finishing machine - 25 - 305 l | CEM series
Features :
● Eccentric-flow rotating barrel.
● Circuit breaker, CW/CCW rotation...
● Eccentric-flow rotating barrel.
● Circuit breaker, CW/CCW rotation...
Centrifugal barrel finishing machine - 25 - 305 l | CEM series
Features :
● Eccentric-flow rotating barrel.
● Circuit breaker, CW/CCW rotation control and timer system.
●
Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
●
Discharger is covered with rubber to resist acid, alkaline, abrading and eliminate work-piece collision during operation.
● Eccentric-flow rotating barrel.
● Circuit breaker, CW/CCW rotation control and timer system.
●
Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
●
Discharger is covered with rubber to resist acid, alkaline, abrading and eliminate work-piece collision during operation.
Centrifugal barrel finishing machine - 170 - 500 l | HM series
Features :
● Parallel-flow rotating barrel.
● Inner...
● Parallel-flow rotating barrel.
● Inner...
Centrifugal barrel finishing machine - 170 - 500 l | HM series
Features :
● Parallel-flow rotating barrel.
● Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
●
Equipped with economic-type mechanism.
● Parallel-flow rotating barrel.
● Inner rotary barrel is coated with rubber lining to resist acid, alkaline, abrading and eliminate the impingement.
●
Equipped with economic-type mechanism.