+7 (812) 645-08-06
Drill bits, reamers
select brand
Indexable insert drill bit / deep hole - ø 66.7 - 165.1 mm | CoroDrill 801
Corodrill is an equipment that is useful for secure drilling in materials that are difficult to undergo chipping. The device has a rigid design and has implemented...
Indexable insert drill bit / deep hole - ø 66.7 - 165.1 mm | CoroDrill 801
Corodrill is an equipment that is useful for secure drilling in materials that are difficult to undergo chipping. The device has a rigid design and has implemented latest technologies in padding and insert. The device is capable of providing excellent control over chipping and also can provide higher process security. The device is highly flexible and is rigid with three pads attached to it. It can deliver improved performance by making use of the latest pad and insert technology. It is possible to adjust the tool without making use of the tool - room service. It has improved the design of coolant channel and also that of the chip mouth.
Anti-vibration boring bar - ø 10 - 600 mm | Silent Tools®
It is possible to maintain good productivity and close tolerances with the Silent Tools dampened boring bars and adapters. This also applies to long tool overhangs over a 3 x bar diameter. Up to...
Anti-vibration boring bar - ø 10 - 600 mm | Silent Tools®
It is possible to maintain good productivity and close tolerances with the Silent Tools dampened boring bars and adapters. This also applies to long tool overhangs over a 3 x bar diameter. Up to 10 x bar diameter can be machined with the Silent Tools dampened steel bars and the dampened carbide reinforced bars go even higher at up to 14 x bar diameter tool overhang.
A productivity increase of 50% for shorter boring bars and up to 400% for longer overhang lengths is achieved. The Silent Tools range provide an improved surface finish, improved chip evacuation, improved surface finish and a reduced cost per component.
They benefit from the unique Silent Tools dampening mechanism, internal coolant through the bar and a flexible modular SL interface.
A productivity increase of 50% for shorter boring bars and up to 400% for longer overhang lengths is achieved. The Silent Tools range provide an improved surface finish, improved chip evacuation, improved surface finish and a reduced cost per component.
They benefit from the unique Silent Tools dampening mechanism, internal coolant through the bar and a flexible modular SL interface.
Chamfering tool for machine tool - ø 12 - 63 mm | CoroMill 495
The SANDVIK COROMANT CoroMill 495 versatile chamfer cutter offers various types of chamfering of holes and along edges in multiple materials and for typical chamfering, back chamfering,...
Chamfering tool for machine tool - ø 12 - 63 mm | CoroMill 495
The SANDVIK COROMANT CoroMill 495 versatile chamfer cutter offers various types of chamfering of holes and along edges in multiple materials and for typical chamfering, back chamfering,...
Deep hole drilling tool - ø 25 - 65 mm | CoroDrill 800
The CoroDrill® 800 is designed with a variety of grades that is capable of machining different materials using precise chip control from its central insert L-geometry technology. It...
Deep hole drilling tool - ø 25 - 65 mm | CoroDrill 800
The CoroDrill® 800 is designed with a variety of grades that is capable of machining different materials using precise chip control from its central insert L-geometry technology. It...
Chamfering tool for machine tool - ø 5 - 8 mm | CoroMill 326
The miniature milling cutters also benefit from three cutting edges for internal chamfering and threading. In addition to this, you can use them with small...
Chamfering tool for machine tool - ø 5 - 8 mm | CoroMill 326
The miniature milling cutters also benefit from three cutting edges for internal chamfering and threading. In addition to this, you can use them with small holes, down to 6 mm, as a complement to CoroMill 327
The three cutting edges ensure productivity, while the back-chamfering and chamfering of holes with one tool is alos possible, with very high precision and extremely low cutting forces. Note that there are many options available, while the small diameter tools come with a long reach, of up to 35 mm. Chamfer and these internal thread milling are just two of the most common uses.
The three cutting edges ensure productivity, while the back-chamfering and chamfering of holes with one tool is alos possible, with very high precision and extremely low cutting forces. Note that there are many options available, while the small diameter tools come with a long reach, of up to 35 mm. Chamfer and these internal thread milling are just two of the most common uses.
Drilling tool - CoroDrill®
The CoroDrill 880 from Sandvik is an indexable insert drill specifically used for general drilling, drilling of angled, curved, concave and convex...
Drilling tool - CoroDrill®
The CoroDrill 880 from Sandvik is an indexable insert drill specifically used for general drilling, drilling of angled, curved, concave and convex surfaces. It offers good accuracy and is highly efficient for cutting and chip removal. Its compact design has optimized grades and geometries that increases its life service and its reliability. It can drill any surfaces such as steel, stainless steel, cast iron, non-ferrous materials, heat resistant materials, and hardened materials. They have a cutting diameter of 31.750 mm.
Deep hole drilling tool - CoroDrill®
Sandvik Coromant is a top notch deep hole drilling system producer. Among its long line of deep drilling solutions is the CoroDrill 805.
The...
The...
Deep hole drilling tool - CoroDrill®
Sandvik Coromant is a top notch deep hole drilling system producer. Among its long line of deep drilling solutions is the CoroDrill 805.
The CoroDrill 805 allows the deep hole drilling of a workpiece without the need to move it around. This prevents the material to move from one set up to another. Through this, deep hole drilling is now achievable without the additional pump capacity. This device also utilizes the same standard inserts as the CoroDrill 800.
Deep hole drilling is the drilling method where the operator bores holes that are 10 to 150 times the original diameter.
The CoroDrill 805 allows the deep hole drilling of a workpiece without the need to move it around. This prevents the material to move from one set up to another. Through this, deep hole drilling is now achievable without the additional pump capacity. This device also utilizes the same standard inserts as the CoroDrill 800.
Deep hole drilling is the drilling method where the operator bores holes that are 10 to 150 times the original diameter.
Boring tool - CoroBore®
CoroBore 820 is a boring tool introduced by Sandvik Coromant. It is actually a modular device engineered for an inside coolant supply with a 35 - 260...
Boring tool - CoroBore®
CoroBore 820 is a boring tool introduced by Sandvik Coromant. It is actually a modular device engineered for an inside coolant supply with a 35 - 260 mm boring rate. It incorporates an up to 4 x diameter and has a particular flexible diameter length, except for the reamer. In addition, it is composed of an adapter, basic holder, and three cutting edges best suited for harsh applications and exceptional infiltration. Also, the CoroBore 820 tool has an excellent boring head characterized by a cartridge with a reamer that consists of a close pitch head with glued blades and shaft.
Reamer
High performance drill concept CoroDrill 880 gets a compliment in the form of Reamer 830. Reamer is a reaming tool that delivers high surface finish. With its modular design and a replaceable cutting head, it is quite...
Reamer
High performance drill concept CoroDrill 880 gets a compliment in the form of Reamer 830. Reamer is a reaming tool that delivers high surface finish. With its modular design and a replaceable cutting head, it is quite easy to change while still fitted in the machine tool spindle. The reaming tool is noted for its precision and easy to handle feature. Precision engineered tapered couplings help hold the cutting head in the holder. This will also deliver the highest levels of concentricity and repeatability with a better radial run-out. The tool has a hexagonal key that will help turn the clamping mechanism to help clamp and release the cutting head. Brazed cermet inserts in grade P10R acts as protective covering. Depending on application, the tool is made of carbon steel, low alloy steel and nodular cast iron. Surface finish ensured with directed cutting fluid.
Stainless steel drilling tool / for titanium / high-productivity / shrink fit - 12 - 19.99 mm | Crownloc® Plus
The Crownloc Plus, manufactured by Seco, is a drilling tool that features a design characterized by new geometry, coating and locking interface with its...
Stainless steel drilling tool / for titanium / high-productivity / shrink fit - 12 - 19.99 mm | Crownloc® Plus
The Crownloc Plus, manufactured by Seco, is a drilling tool that features a design characterized by new geometry, coating and locking interface with its highly durable locking function. This device also consists of a glossy figure with deep and broad flutes. Moreover, through its durable and peculiar design, this product is able of suppressing wear in a variety of materials and requires no regrinding or rearranging.
The Crownloc Plus consists of an enhanced chip organization and an enhanced opening capability. It also presents users a cheap cost requirement yet providing quality operation.
The Crownloc Plus consists of an enhanced chip organization and an enhanced opening capability. It also presents users a cheap cost requirement yet providing quality operation.