+7 (812) 645-08-06
Laser cutting, Laser machining
select brand
CO2 laser cutting machine / marking machines - 460 x 305 mm, 30 - 55 W | LS100
The flexible and durable CO2 laser engraver from Gravograph is powered by a 35, 40, or 55 Watts of laser source and has an engraving area of 18" x 12". With the compact and inventive design, it can be set-up in a retail outlet, or a shop with ease and is a suitable...
CO2 laser cutting machine / marking machines - 460 x 305 mm, 30 - 55 W | LS100
The flexible and durable CO2 laser engraver from Gravograph is powered by a 35, 40, or 55 Watts of laser source and has an engraving area of 18" x 12". With the compact and inventive design, it can be set-up in a retail outlet, or a shop with ease and is a suitable...
CO2 laser cutting machine / marking machines - 610 x 610 mm, 30 - 80 W | LS900
The FORM 300 sinker park erosion units are equipped with an ISPG (Intelligent Speed Power Generator) which uses patented technologies to deliver new benchmarks in material...
CO2 laser cutting machine / marking machines - 610 x 610 mm, 30 - 80 W | LS900
The FORM 300 sinker park erosion units are equipped with an ISPG (Intelligent Speed Power Generator) which uses patented technologies to deliver new benchmarks in material removal, surface quality and accuracy of form. Electrode wear is minimized in very machine operation from roughing to finishing with the help of graphite or copper electrodes.
The productivity indicates an average increase of 30 percent that has the potential to reach the 100 percent range for pre milled forms. A 50 percent increase can be achieved in erosion speed without any increase in electrode wear even in narrow, deep cavities with poor flushing conditions.
The productivity indicates an average increase of 30 percent that has the potential to reach the 100 percent range for pre milled forms. A 50 percent increase can be achieved in erosion speed without any increase in electrode wear even in narrow, deep cavities with poor flushing conditions.
CO2 laser cutting machine / marking machines - 610 x 305 mm, 30 - 55 W | LS100Ex
The LS100Ex is a CO2 laser engraving machine that is recommended for engraving, cutting plastics, wood, acrylic, metals, glass and whatnots while it can run with speed ranges...
CO2 laser cutting machine / marking machines - 610 x 305 mm, 30 - 55 W | LS100Ex
The LS100Ex is a CO2 laser engraving machine that is recommended for engraving, cutting plastics, wood, acrylic, metals, glass and whatnots while it can run with speed ranges up to 2.54 m/sec. This features a hassle-free set up which can be in the office, workshop and in the factory. It has an LCD control panel that lessens the costs of time because of its short-cuts applications. It also includes a Gravostyle software which enables you to put text, logos and images easily plus its red-pointer beam and auto-focus system.
This Laser engraving has advanced functions namely bar code and matrix functions, rubber stamp wizards, dial and graduation creation.
This Laser engraving has advanced functions namely bar code and matrix functions, rubber stamp wizards, dial and graduation creation.
CO2 laser cutting machine / marking machines - 610 x 610 mm, 35 - 80 W | LS900XP
Gravograph introduces LS900XP in the family of its engraving machines. Offers high productivity and durability with engraving speeds of up to 4meters/sec (79in./sec) driven...
CO2 laser cutting machine / marking machines - 610 x 610 mm, 35 - 80 W | LS900XP
Gravograph introduces LS900XP in the family of its engraving machines. Offers high productivity and durability with engraving speeds of up to 4meters/sec (79in./sec) driven by servo motors and materials made of heavy duty chassis and gantry for intensive industrial lasering. Efficient job processing assured with red aiming beam laser, automatic focal adjust, cycle time indicator and an end of job alarm that enhance optimization. With bigger dimension of 610x610x250mm platform for bulky objects and high power range of sources up to 80W for durable mark and high quality. It makes use of Gravostyle Graphic software that makes laser engraving easier.
Perforating machine laser - JENOPTIK-VOTAN® A Classic
The laser perforationg system JENOPTIK-VOTAN® A Classic manufactures integrated predetermined breaking points in airbag covers by means of the laser. The laser creates a line of weakness along the required airbag flap contour by stringing together blind holes from the material base side. A specially designed sensor technology prevent the material to be totally penetrated by the laser always in...
Perforating machine laser - JENOPTIK-VOTAN® A Classic
The laser perforationg system JENOPTIK-VOTAN® A Classic manufactures integrated predetermined breaking points in airbag covers by means of the laser. The laser creates a line of weakness along the required airbag flap contour by stringing together blind holes from the material base side. A specially designed sensor technology prevent the material to be totally penetrated by the laser always in...
3D laser cutting machine - JENOPTIK-VOTAN® BIM
The laser cutting system JENOPTIK-VOTAN® BIM combines the speed, flexibility and minimzed footprint of a laser processing system even more than conventional laser cutting machines. There is no stirring fiber-optic cable. Instead the light is guided through...
3D laser cutting machine - JENOPTIK-VOTAN® BIM
The laser cutting system JENOPTIK-VOTAN® BIM combines the speed, flexibility and minimzed footprint of a laser processing system even more than conventional laser cutting machines. There is no stirring fiber-optic cable. Instead the light is guided through...
Laser cutting machine / for glass - JENOPTIK-VOTAN® Advanced
The laser system JENOPTIK-VOTAN® Advanced offers the possibility to cut glass with TLS-technology. This prevents microcracks in the material as well as costly post-processings and guarentees a high bending strength and thermal shock resistance...
Laser cutting machine / for glass - JENOPTIK-VOTAN® Advanced
The laser system JENOPTIK-VOTAN® Advanced offers the possibility to cut glass with TLS-technology. This prevents microcracks in the material as well as costly post-processings and guarentees a high bending strength and thermal shock resistance...
Perforating machine laser - JENOPTIK-VOTAN® A Compact
Jenoptik-VOTAN A Compact ® offers the advantages of laser perforation on the smallest footprint the system manufactures integrated predetermined breaking points in airbag covers by means of the laser. The laser creates a line of weakness along the required airbag flap contour by stringing together blind holes from the material base side. A specially designed sensor technology prevent the material...
Perforating machine laser - JENOPTIK-VOTAN® A Compact
Jenoptik-VOTAN A Compact ® offers the advantages of laser perforation on the smallest footprint the system manufactures integrated predetermined breaking points in airbag covers by means of the laser. The laser creates a line of weakness along the required airbag flap contour by stringing together blind holes from the material base side. A specially designed sensor technology prevent the material...
Water-jet cutting machine / glass / steel / for ceramics - max. 1020 x 1260 x 200 | QUICKJET II
The MECANUMERIC's QUICKJET II is compactly made water jet-cutting equipment intended for slicing stainless steel, rubber, ceramics, cardboard, plastic, textile, leather, paper,...
Water-jet cutting machine / glass / steel / for ceramics - max. 1020 x 1260 x 200 | QUICKJET II
The MECANUMERIC's QUICKJET II is compactly made water jet-cutting equipment intended for slicing stainless steel, rubber, ceramics, cardboard, plastic, textile, leather, paper, glass, titanium, minerals, THP foam, THP aluminum THP granite, THP foam and other comparable materials.
It is integrated with ball screws in all of its axes, a user-friendly numerical control and and AC brushless servomotors. It is suitable with VHP components and high pressure pumps constructed by the KMT. It is a fully enclosed equipment enabling it to be used in school fields.
Its working area has a size of 1020 x 1260 x 200 mm (XYZ). Its table size, on the other hand, is 1150 x 1350 mm.
It is integrated with ball screws in all of its axes, a user-friendly numerical control and and AC brushless servomotors. It is suitable with VHP components and high pressure pumps constructed by the KMT. It is a fully enclosed equipment enabling it to be used in school fields.
Its working area has a size of 1020 x 1260 x 200 mm (XYZ). Its table size, on the other hand, is 1150 x 1350 mm.
Laser cutting machine / with fixed table - max. 3050 x 2020 x 195 mm | MECALASE
The Mecalase Laser Equipment is optimized to cut equipment which have standard focusing heads namely acrylic, plastic materials, woods and by-products. Meanwhile,...
Laser cutting machine / with fixed table - max. 3050 x 2020 x 195 mm | MECALASE
The Mecalase Laser Equipment is optimized to cut equipment which have standard focusing heads namely acrylic, plastic materials, woods and by-products. Meanwhile,...
CO2 laser cutting machine / CNC - 3050 x 2050 x 195 mm | LASCUT
The LASCUT is a laser cutting device manufactured by Mécanuméric. It is suitable for a wide variety...
CO2 laser cutting machine / CNC - 3050 x 2050 x 195 mm | LASCUT
The LASCUT is a laser cutting device manufactured by Mécanuméric. It is suitable for a wide variety...
Laser cutting machine / plastics / with fixed table / engraving - 1505 x 1250 x 80 mm | LASEC
The LASEC 1250 is mainly used for vectorial-process cutting and raster-process engraving purposes. It is...
Laser cutting machine / plastics / with fixed table / engraving - 1505 x 1250 x 80 mm | LASEC
The LASEC 1250 is mainly used for vectorial-process cutting and raster-process engraving purposes. It is applicable for machining leathers, fabrics, cardboards, synthetic resins, mineral gasses, soft stones (for engraving) and woods. It can also be used in processing plastics excluding the PVC type ones.
This laser equipment comes with a fixed table, mobile mirrors, fixed laser and mobile gantry.
This laser equipment comes with a fixed table, mobile mirrors, fixed laser and mobile gantry.
CO2 laser cutting machine / glass / engraving - max. 1520 x 1250 x 190 mm | LASPID
The LASPID is a laser machine manufactured by Mécanuméric. It functions as a cutting and engraving device that uses a LASER CO2 laser source. Its key...
CO2 laser cutting machine / glass / engraving - max. 1520 x 1250 x 190 mm | LASPID
The LASPID is a laser machine manufactured by Mécanuméric. It functions as a cutting and engraving device that uses a LASER CO2 laser source. Its key...