+7 (812) 645-08-06
Spreader beams
select brand
Spreader beam - VT
Vacuum Traverse VT is a vacuum spreader bar manufactured by Probst. It is specifically designed for efficient handling and laying of various pipe types. This vacuum...
Spreader beam - VT
Vacuum Traverse VT is a vacuum spreader bar manufactured by Probst. It is specifically designed for efficient handling and laying of various pipe types. This vacuum can handle PVC pipes weighing 300kg, or concrete coated steel pipes that weigh 10,000kg. It is characterized by Probst vacuum technology for faster and safer lifting. Its arched suction plates fit the surface of the pipes. It is equipped with large volume storage tanks, integrated into the spreader bar. Probst offers various types of vacuum units from standard to power VT that are made for a specific operation. Units from Probst are guaranteed to make pipe installation easier and safer.
Variable spreader beam - 1 000 - 10 000 kg | PAL series
The H-bar Spreader Beam Series PAL is a steel lifting beam for loads from 1000 to 10000kg. The product has rustproof paint and it comes with high-strength yellow...
Variable spreader beam - 1 000 - 10 000 kg | PAL series
The H-bar Spreader Beam Series PAL is a steel lifting beam for loads from 1000 to 10000kg. The product has rustproof paint and it comes with high-strength yellow RAL1028 finishing and it has a tear-resistant eyelet for use with synthetic slings,cables etc. It is fitted with 2 articulated forged safety swivel hooks and safety coefficient is 4.Hooks can be adjusted by means of upper handles this is for adjustable spreaders only.No 100mm adjustment as basic for the adjustable spreaders.Lastly,it is manufactured in accordance to NFE 52210 standards and delivered with instructions for utilization and maintenance.Conformity is EC certified.
Wide flange spreader beam - 1 000 - 10 000 kg | PAL series
The PAL Series is a range of aluminium lifting beams which can load from 125 to 2 000 kg capacity....
Wide flange spreader beam - 1 000 - 10 000 kg | PAL series
The PAL Series is a range of aluminium lifting beams which can load from 125 to 2 000 kg capacity. This device is suited with swivel hooks with forged safety clips to generate the tool more efficiently. It is designed with tear-resistant eyelet which is built to use with synthetic slings, cables, and others. Moreover, the device can generate with a maximum lifting speed of 16 m/mn.
Wide flange spreader beam / variable - 1 000 - 10 000 kg | PAL series
The Verlinde PAL Series is a range of steel lifting beams which has a capacity to load from 1 000 to...
Wide flange spreader beam / variable - 1 000 - 10 000 kg | PAL series
The Verlinde PAL Series is a range of steel lifting beams which has a capacity to load from 1 000 to 10 000 kg. This device is suited with swivel hooks with forged safety clips to generate the tool more efficiently. It is designed with tear-resistant eyelet which is built to use with synthetic slings, cables, and others. Moreover, the device can generate with a maximum lifting speed of 16 m/mn.
Aluminum spreader beam / variable - 125 - 2 000 kg | PAL series
The PAL Series is a range of aluminium lifting beams which can load from 125 to 2 000 kg capacity. This...
Aluminum spreader beam / variable - 125 - 2 000 kg | PAL series
The PAL Series is a range of aluminium lifting beams which can load from 125 to 2 000 kg capacity. This device is suited with swivel hooks with forged safety clips to generate the tool more efficiently. It is designed with tear-resistant eyelet which is built for use with synthetic slings, cables, and others. Moreover, the device can generate with a maximum lifting speed of 16 m/mn.
Wide flange lifting beam / aluminum / variable - 125 - 2 000 kg | PAL series
These products are fitted with swivel hooks that come with forged safety clips. They are tear-resistant and can be used with synthetic slings and cables. The rust-proof,...
Wide flange lifting beam / aluminum / variable - 125 - 2 000 kg | PAL series
These products are fitted with swivel hooks that come with forged safety clips. They are tear-resistant and can be used with synthetic slings and cables. The rust-proof, anodized aluminum profile, along with the safety coefficient of four, are major advantages. There are no load-bearing welding requirements, while the item is manufactured in accordance to NFE 52210 standards.
This item is part of the FEM 5 group, with the hooks being adjustable by movable spindles for adjustable beams. The items are adjustable in steps of 100mm, while the lifting speed is 16m/minute, delivered with instructions for maintenance and use.
This item is part of the FEM 5 group, with the hooks being adjustable by movable spindles for adjustable beams. The items are adjustable in steps of 100mm, while the lifting speed is 16m/minute, delivered with instructions for maintenance and use.
Variable spreader beam - 3 - 5 t
The Bar Spider Equalizer Beam from Priuli Progetti is a beam constructed out of two...
Variable spreader beam - 3 - 5 t
The Bar Spider Equalizer Beam from Priuli Progetti is a beam constructed out of two section bars. It also has an enclosure for the counterweights in order to minimize the height that is essential for loading/unloading the bundles or bars. This beam does not contain any welds to deliver a good life-efficiency and reliability.
Spreader beam - max. 5 t
This is the very first chain equalizer, which comes with automatic release, conforming to the Italian Ministerial Circular 21/2002, of 17/04/202. This allows transporting bundles...
Spreader beam - max. 5 t
This is the very first chain equalizer, which comes with automatic release, conforming to the Italian Ministerial Circular 21/2002, of 17/04/202. This allows transporting bundles of bars in a way that is easy and safe. Because of the compact size, the item is also suitable for use with very low bridge cranes, making it ideal for any type of warehouse, eliminating the use of walkways.
There is no need to climb onto the forges for unhooking the chains and ties, which are cut to the ground. The innovative automatic release system is pending a patent, and allows loading the machines without stopping the production cycle, and with the operator standing clear of the loading area.
There is no need to climb onto the forges for unhooking the chains and ties, which are cut to the ground. The innovative automatic release system is pending a patent, and allows loading the machines without stopping the production cycle, and with the operator standing clear of the loading area.