+7 (812) 645-08-06
Cranes: tower cranes, mobile cranes...
select brand
Telescopic crane / articulated / truck-mounted / safety - 26 m | GLA 85
Higher standards of security and safety are now achievable when you have the superior protection of a Schwing Fire Boom. The three section articulated design allows elevated fire fighting to reach up, out, down and over obstructions and pin-point high volume...
Telescopic crane / articulated / truck-mounted / safety - 26 m | GLA 85
Higher standards of security and safety are now achievable when you have the superior protection of a Schwing Fire Boom. The three section articulated design allows elevated fire fighting to reach up, out, down and over obstructions and pin-point high volume 5,000 gpm flow for maximum effectiveness.
This strategic boom positioning far exceeds the usefulness of a telescoping ladder or fixed spray systems and the 1000-pound lifting capacity can be a lifesaver in rescue situations. Fire companies have the confidence in the construction grade durability of the Schwing system that combines easy-to-use controls and fast acting hydraulics for fast set-up at an incident.
Widely accepted around the world, Schwing equipment is manufactured at our 400,000 square foot factory in Minnesota where the highest standards of fabrication, assembly and testing are maintained. Demand more from your fire fighting equipment with Schwing fire booms proven in the demanding construction environment.
This strategic boom positioning far exceeds the usefulness of a telescoping ladder or fixed spray systems and the 1000-pound lifting capacity can be a lifesaver in rescue situations. Fire companies have the confidence in the construction grade durability of the Schwing system that combines easy-to-use controls and fast acting hydraulics for fast set-up at an incident.
Widely accepted around the world, Schwing equipment is manufactured at our 400,000 square foot factory in Minnesota where the highest standards of fabrication, assembly and testing are maintained. Demand more from your fire fighting equipment with Schwing fire booms proven in the demanding construction environment.
Telescopic crane / truck-mounted - 3 180 mm, 10 490 kg | QY8B.5
The QY8B.5 from XCMG is a heavy duty truck crane that provides safe and reliable operations. It is energy efficient and environment friendly,...
Telescopic crane / truck-mounted - 3 180 mm, 10 490 kg | QY8B.5
The QY8B.5 from XCMG is a heavy duty truck crane that provides safe and reliable operations. It is energy efficient and environment friendly, needing only 25.5 liters of fuel to travel 100 km when running up to 75 km per hour. Its crane has an 8-ton lifting capacity with a minimum working radius of 3 m and a maximum lifting torque of 245 K n.m. Its break system utilizes a double circuit air pressure design that guarantees the brake safety of the truck while traveling. It is also easy to maintain as its pipeline minimizes the dismantling and installing time.
Telescopic crane / truck-mounted - 3 200 mm, 16 000 kg | QY12B.5
XCMG's QY12B.R is an energy-efficient and environmentally-friendly truck crane that allows you to reach greater heights even with a heavy load....
Telescopic crane / truck-mounted - 3 200 mm, 16 000 kg | QY12B.5
XCMG's QY12B.R is an energy-efficient and environmentally-friendly truck crane that allows you to reach greater heights even with a heavy load. This ergonomically-designed machine boasts of capabilities and techniques that can greatly benefit your building, hauling and mounting projects. With its plug-in boom head, embedded boom block and special telescoping mechanism, rest assured that this machine can handle even the most demanding of jobs. Whenever you're looking for a strong, stable and efficient truck crane, look no further than XCMG's QY12B.R.
Telescopic crane / truck-mounted - 3 250 mm, 24 000 kg | QY16B.5
The stress associated with the main bearing carriers is more reasonable because of the optimizing layout of this machine. The manufacturer also...
Telescopic crane / truck-mounted - 3 250 mm, 24 000 kg | QY16B.5
The stress associated with the main bearing carriers is more reasonable because of the optimizing layout of this machine. The manufacturer also guarantees a higher lifting performance than similar products that support the same tonnage.
The mature jib technique is an advantage, as it integrates the embedded boom block with a special telescoping mechanism and a plug-in boom head, making the item reliable and stable. Finally, this item will also provide further stress design optimizations, so buy now and enjoy high performance and superior quality.
The mature jib technique is an advantage, as it integrates the embedded boom block with a special telescoping mechanism and a plug-in boom head, making the item reliable and stable. Finally, this item will also provide further stress design optimizations, so buy now and enjoy high performance and superior quality.
Telescopic crane / truck-mounted - 3 350 mm, 22 900 kg | QY16C
The D6114 model engine comes with dimensions 11990 mm x 2500 x...
Telescopic crane / truck-mounted - 3 350 mm, 22 900 kg | QY16C
The D6114 model engine comes with dimensions 11990 mm x 2500 x 3350 mm and a wheel-base of 4025 mm between axles 1 and 2 and 1350 mm between axles 2 and 3. The truck assumes 22900 kg when loaded, with axle 1 load of 5240 kg and axle 2 load of 17660 kg.
Telescopic crane / truck-mounted - 3 300 mm, 26 020 kg | QY20B.5
The QY20B.5 truck crane is designed for a far more excellent performance. To continue, its optimizing layout makes the stress of...
Telescopic crane / truck-mounted - 3 300 mm, 26 020 kg | QY20B.5
The QY20B.5 truck crane is designed for a far more excellent performance. To continue, its optimizing layout makes the stress of the main bearing carriers more reasonable, and the lifting performance is higher than the products with the same tonnage. The application of the mature jib technique integrates plug-in boom head, embedded boom block, and special telescoping mechanism, which makes the jib more stable and reliable. The box-type outriggers have larger span, stronger rigidity, and better stability.
Swing arm crane / truck-mounted - 13.1 m | SPK6500
The new PK 6500 performance is an ideal crane for light vehicles, e.g.for use in the municipal...
Swing arm crane / truck-mounted - 13.1 m | SPK6500
The new PK 6500 performance is an ideal crane for light vehicles, e.g.for use in the municipal sector. As standard it comes with everything required for tough daily duty: know-how and leading technology from PALFINGER. This makes it safe and reliable. And provides you with high efficiency for every job. Users can rely on it because the after-service is also right.
Telescopic crane / truck-mounted - 20 t | STC200
Excellent and stable chassis performance /chassis system
Double-axle drive is used, providing good trafficability and comfortableness under complex road condition with reliable traveling performance.
Engine has the multimode power output function,...
Double-axle drive is used, providing good trafficability and comfortableness under complex road condition with reliable traveling performance.
Engine has the multimode power output function,...
Telescopic crane / truck-mounted - 20 t | STC200
Excellent and stable chassis performance /chassis system
Double-axle drive is used, providing good trafficability and comfortableness under complex road condition with reliable traveling performance.
Engine has the multimode power output function,...
Double-axle drive is used, providing good trafficability and comfortableness under complex road condition with reliable traveling performance.
Engine has the multimode power output function,...
Telescopic crane / truck-mounted - 25 t, 11 m | STC250
The SANY STC250 truck crane hoist has a maximum capacity of 25 tons and a minimum working radius of 3.0 meters. When the main boom is extended...
Telescopic crane / truck-mounted - 25 t, 11 m | STC250
The SANY STC250 truck crane hoist has a maximum capacity of 25 tons and a minimum working radius of 3.0 meters. When the main boom is extended fully, it is 33.5 meters. The hexagonal profile is constructed from HG 785/HG 70 high-tensile structure steel plate. There a number of engine options.
The crane has a maximum travel speed of 80km/h, a maximum 30% grade with a maximum single rope lifting speed of 125m/min. The base boom has a maximum lifting moment of 962KN.M and is built to guarantee customer safety.
The crane has a maximum travel speed of 80km/h, a maximum 30% grade with a maximum single rope lifting speed of 125m/min. The base boom has a maximum lifting moment of 962KN.M and is built to guarantee customer safety.
Telescopic crane / truck-mounted - 25 t | STC250H
Max. loading capacity 25 T, Min. working radius 3.0 M
Full extension of main boom 39.5 M, hexagonal profi le, made of HG 785 and...
Full extension of main boom 39.5 M, hexagonal profi le, made of HG 785 and...
Telescopic crane / truck-mounted - 25 t | STC250H
Max. loading capacity 25 T, Min. working radius 3.0 M
Full extension of main boom 39.5 M, hexagonal profi le, made of HG 785 and HG 70 high tentsile structure steel plate.
Variety of engine options provided to customes: Dongfeng Cummins ISLe 290 30.
Max. travel speed 80km/h, Max. gradeability 30%(theoretically)
SYML moment limiter, independently developed by SANY, ensures safety of customers.
Max. lifting moment for base boom 962 KN.M
Max. single rope lifting speed 125m/min
Max. Gradeability 30%
Full extension of main boom 39.5 M, hexagonal profi le, made of HG 785 and HG 70 high tentsile structure steel plate.
Variety of engine options provided to customes: Dongfeng Cummins ISLe 290 30.
Max. travel speed 80km/h, Max. gradeability 30%(theoretically)
SYML moment limiter, independently developed by SANY, ensures safety of customers.
Max. lifting moment for base boom 962 KN.M
Max. single rope lifting speed 125m/min
Max. Gradeability 30%
Telescopic crane / truck-mounted - 55 t, 42.5 m | STC500
The STC500 series of truck cranes can handle an impressive 25 ton load and boast a 3.0 m working radius. The main boom extends to 39.5 m, and is crafted from high quality...
Telescopic crane / truck-mounted - 55 t, 42.5 m | STC500
The STC500 series of truck cranes can handle an impressive 25 ton load and boast a 3.0 m working radius. The main boom extends to 39.5 m, and is crafted from high quality HG 70 and HG 785 tensile steel plate. There are several engine options to choose from among Dongfeng Cummins ISLe 290 30, with the maximum travel speed being 80km/h.
Developed by Sany, the SYML moment limiter caters to safety of operators. These cranes also feature lift single rope speeds of 125m/min. The base boom can achieve a maximum lifting moment of 962 KN. and a 30% maximum gradeability. The swing table of these truck cranes feature a tall slewing radius of 4.0mm.
Developed by Sany, the SYML moment limiter caters to safety of operators. These cranes also feature lift single rope speeds of 125m/min. The base boom can achieve a maximum lifting moment of 962 KN. and a 30% maximum gradeability. The swing table of these truck cranes feature a tall slewing radius of 4.0mm.