+7 (812) 645-08-06
Thermal spray coating equipment
select brand
ESD deposition machine - Rocklinizer
The Rocklinizer equipment, using the Rocklinizing process, applies a hard and wear resistant surface of Tungsten Carbide, Titanium Carbide and Rockhard electrode material to repair metals, tools and dies.
The...
The...
ESD deposition machine - Rocklinizer
The Rocklinizer equipment, using the Rocklinizing process, applies a hard and wear resistant surface of Tungsten Carbide, Titanium Carbide and Rockhard electrode material to repair metals, tools and dies.
The Rocklinizer electronically impregnates and deposits wear-resistant material both underneath and on top of metal surfaces. Unlike welding or metal spraying, no appreciable heat is generated; and the electrode material will not separate or flake off the workpiece. After Rocklinizing, no heat treatment, grinding or other surface treatment is necessary.
The end result of this surface treatment is to increase productivity and reduce costs. When the tools and dies remain in operation without replacement due to wear, there will be less machine downtime, operator idle time, and expense of new or resharpened tools and dies.
The Rocklinizer electronically impregnates and deposits wear-resistant material both underneath and on top of metal surfaces. Unlike welding or metal spraying, no appreciable heat is generated; and the electrode material will not separate or flake off the workpiece. After Rocklinizing, no heat treatment, grinding or other surface treatment is necessary.
The end result of this surface treatment is to increase productivity and reduce costs. When the tools and dies remain in operation without replacement due to wear, there will be less machine downtime, operator idle time, and expense of new or resharpened tools and dies.
Electrostatic deposition machine / with rotating cathodes - Rocklinizer Model 850
Rocklinizer Model 850 / 850E with ROTARY APPLICATOR - Deposits from .0002" to .007" in a single application, controllable...
Electrostatic deposition machine / with rotating cathodes - Rocklinizer Model 850
Rocklinizer Model 850 / 850E with ROTARY APPLICATOR - Deposits from .0002" to .007" in a single application, controllable by machine setting. Approximately 30 lbs. (13.2 kg.)
Model 850 Rotary Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
Faster Application
Rotary Applicator
Digital Readout
Touch Panel Controls
Portable
Model 850 Rotary Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
Faster Application
Rotary Applicator
Digital Readout
Touch Panel Controls
Portable
ESD deposition machine - Rocklinizer Model 600
600 / 600E - Deposits from .0001" to .004" in a single application, controllable...
ESD deposition machine - Rocklinizer Model 600
600 / 600E - Deposits from .0001" to .004" in a single application, controllable within .0001" by machine dial setting.
Approximately 49 lbs. (22.3 kg.)
Model 600 Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
Approximately 49 lbs. (22.3 kg.)
Model 600 Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
Electrostatic deposition machine - Rocklinizer Model 500
500 / 500E - Deposits from .0001" to .002" in a single application, controllable...
Electrostatic deposition machine - Rocklinizer Model 500
500 / 500E - Deposits from .0001" to .002" in a single application, controllable within .0001" by machine dial setting.
Approximately 33 lbs. (14.5 kg.)
Model 500 Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
Approximately 33 lbs. (14.5 kg.)
Model 500 Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
Electrostatic deposition machine - 380AKM
ungsten carbide applied to one side of a sharpened blade provides a self sharpening edge akin to the Beaver Tooth effect in nature. The dentine wears away faster than the enamel as the Beavers lower jaw works against the upper jaw. This hard-soft...
Electrostatic deposition machine - 380AKM
ungsten carbide applied to one side of a sharpened blade provides a self sharpening edge akin to the Beaver Tooth effect in nature. The dentine wears away faster than the enamel as the Beavers lower jaw works against the upper jaw. This hard-soft differential hardness causes the knife edge to become more aggressive as it is used.
Many knife makers eliminate the need for heat treatment as softer metal blades can now be upgraded by applying the hard and wear resistant carbide surface to only one edge.
Alternatively tungsten carbide can be applied to both edges of a knife blade for wear protection.
The amount of carbide deposit can be precisely controlled
to match the bevel of the edge.
This unique deposition process retains sharpness longer and resists rust and corrosion. Conventional resharpening techniques can be used when the knife blade edges eventually become dull before reapplying the Rocklinizing process.
Many knife makers eliminate the need for heat treatment as softer metal blades can now be upgraded by applying the hard and wear resistant carbide surface to only one edge.
Alternatively tungsten carbide can be applied to both edges of a knife blade for wear protection.
The amount of carbide deposit can be precisely controlled
to match the bevel of the edge.
This unique deposition process retains sharpness longer and resists rust and corrosion. Conventional resharpening techniques can be used when the knife blade edges eventually become dull before reapplying the Rocklinizing process.