+7 (812) 645-08-06
Sand-blasting machines, sand-blasting cabinets, sand-blasting guns
select brand
Closed-circuit sand-blasting machine / portable - ELS-CCB series
This portable, industrial, versatile tool combines closed-circuit...
Closed-circuit sand-blasting machine / portable - ELS-CCB series
This portable, industrial, versatile tool combines closed-circuit blasting, recovery, and media reclaimer. Can be configured as closed-circuit blast tool, separate blast and recovery tools, and media transfer tool.
Closed-circuit sand-blasting machine - Educt-O-Matic
Clemco's closed-circuit suction blast tool for spot cleaning, removing weld spatter, and deburring...
Closed-circuit sand-blasting machine - Educt-O-Matic
Clemco's closed-circuit suction blast tool for spot cleaning, removing weld spatter, and deburring...
Closed-circuit sand-blasting machine - 47 cfm, 80 psi, 36 in/min | Comet
The Comet packs the power of an industrial suction blast, recovery, and reclaim system into a package not much larger than a shop vac. The wheel-mounted Comet includes its own pressure...
Closed-circuit sand-blasting machine - 47 cfm, 80 psi, 36 in/min | Comet
The Comet packs the power of an industrial suction blast, recovery, and reclaim system into a package not much larger than a shop vac. The wheel-mounted Comet includes its own pressure regulator, pressure gauge, and moisture separator. The 150-cfm media reclaimer operates on household current - 115v, 1 Ph, 60 Hz. The dust collector houses 14 cotton sateen tubular filters. With 20 feet of recovery hose, the Comet lets the operator move unencumbered about the work site. Specialized brushes allow the Comet to clean inside angles, outside angles, and uneven surfaces. The Comet uses 47 cfm of air at 80 psi, and cleans a path about 1-inch wide, at up to 36 inches per minute. It works best with fine mesh glass bead or aluminum oxide.
Closed-circuit sand-blasting machine - 70 cfm, 80 psi, 72 in/min | Super Comet
With a No. 3 nozzle, the Super Comet cleans a path about 1-inch wide, at up to 72 inches per minute. With 20 feet of hose, the four-wheel cart moves easily...
Closed-circuit sand-blasting machine - 70 cfm, 80 psi, 72 in/min | Super Comet
With a No. 3 nozzle, the Super Comet cleans a path about 1-inch wide, at up to 72 inches per minute. With 20 feet of hose, the four-wheel cart moves easily on any smooth, level surface. The built-in 1/2 cubic foot, ASME-coded pressure vessel features an adjustable metering valve to handle all common non-metallic recyclable abrasives. A storage hopper holds the recovered media and refills the pressure vessel when the operator releases the remote control handle. The system has a built-in moisture separator, pressure regulator, and gauge. The dust collector houses 12 cotton sateen filter tubes.
Pressure blast cabinet / heavy-duty - 2 cu ft, 50 x 39 x 43 in | BNP 220
BNP blast cabinets deliver efficient, affordable media blasting to clean, peen, deburr, or finish parts. The BNP 220's larger enclosure (50 by 39 by 43 inches tall) accepts powered turntables, ZERO's A-300 Automation Kit, and other Option Plus modifications....
Pressure blast cabinet / heavy-duty - 2 cu ft, 50 x 39 x 43 in | BNP 220
BNP blast cabinets deliver efficient, affordable media blasting to clean, peen, deburr, or finish parts. The BNP 220's larger enclosure (50 by 39 by 43 inches tall) accepts powered turntables, ZERO's A-300 Automation Kit, and other Option Plus modifications....
Automated sand-blasting machine
Designed mainly for large pieces and shot blasting, room blasting machines comprising of oscillating machines have been designed. They are widely used for, Silage wagon,...
Automated sand-blasting machine
Designed mainly for large pieces and shot blasting, room blasting machines comprising of oscillating machines have been designed. They are widely used for, Silage wagon, Railcars, Freight wagons, Chassis wagons and tankers. The purpose of this is to blast all parts without any need for adjusting after shot-blasting. Through turbines, the blasting operation is conducted in the central plant. These rooms comprise of Automatic entrance and exit, Modular panels bolted together, easily interchangeable central panels and coating abrasion rubber side. The grit recovery system has reduced foundations and there is also a superior system for automated abrasive cleaning.
Rotary drum blast cabinet
Sirsi Metallisator presents revolving blast cabinet. Rotor of shot-blasting type are facilities which have been developed for treating small and medium pieces. The cabinet has a special auxiliary canister in the inside that can hold small components...
Rotary drum blast cabinet
Sirsi Metallisator presents revolving blast cabinet. Rotor of shot-blasting type are facilities which have been developed for treating small and medium pieces. The cabinet has a special auxiliary canister in the inside that can hold small components such as pins, bushings and flanges. This is an ideal substitute for chains where lost material may pose problems to the carpets.
This system has been made by using detailed studies and relevant experiences. It has a concept of absolute parameter control regarding material blasting "at least" via the grades. The cabinet features special seal, which was developed in contact with the door and the turbine. These seals prevent losing parts during treatment. The required abrasive-type is used by the shaker double selection. The cabinet has automatic loader bucket and hydraulic. Also unloading is automatic. It allows having a reserve transport vibratory bowl feeder GRANIGLIATI the bin collection.
This system has been made by using detailed studies and relevant experiences. It has a concept of absolute parameter control regarding material blasting "at least" via the grades. The cabinet features special seal, which was developed in contact with the door and the turbine. These seals prevent losing parts during treatment. The required abrasive-type is used by the shaker double selection. The cabinet has automatic loader bucket and hydraulic. Also unloading is automatic. It allows having a reserve transport vibratory bowl feeder GRANIGLIATI the bin collection.
Mobile sand-blasting machine - 250 l/min | D50
The Portable sand blasting machine D50 is manufactured by ACF. The unit showcases...
Mobile sand-blasting machine - 250 l/min | D50
The Portable sand blasting machine D50 is manufactured by ACF. The unit showcases a simple and standard design that does not require any adjustment.
The product is very portable, with a dry weight of 10 kg. It features an economical design, with only 10 CFM air delivery. It can adapt on several types of surfaces.
The product is very portable, with a dry weight of 10 kg. It features an economical design, with only 10 CFM air delivery. It can adapt on several types of surfaces.
Sand-blasting machine - max. 200 l | SF series
The SF series is manufactured by ACF, and is a blasting equipment that is integrated with media...
Sand-blasting machine - max. 200 l | SF series
The SF series is manufactured by ACF, and is a blasting equipment that is integrated with media flow control valve, which has a safety valve. It has a main moisture separator with loading skid that is appropriate for safety factor and handling, which has an automatic and protected pop-up valve. It is available with pressure in 8 bars and volume of 50 to 200 l.
Sand-blasting machine - max. 130 l | SR series
The SR Series, manufactured by ACF, is a sandblaster equipped with a remote control...
Sand-blasting machine - max. 130 l | SR series
The SR Series, manufactured by ACF, is a sandblaster equipped with a remote control and protected pop-up valve. It has a loading capacity that ranges from 50 up to 130 liters, maximum dimensions of 1050 x 1065 x 800 mm, and weight of 110 kg. This is used for soda stripping, spray painting, and protective coatings.
Nozzle holder sand-blasting - S9xx series
The S9xx series are types of nozzle holders. The series is made of different models...
Nozzle holder sand-blasting - S9xx series
The S9xx series are types of nozzle holders. The series is made of different models...