+7 (812) 645-08-06
Thermoforming machines
select brand
Thermoforming punching and stacking machine - 760 x 530 mm (30 x 21") | GN760
The GN760 is a plug-assist thermoformer manufactured by GN Plastics. Its key features include an in-mould cutting; special...
Thermoforming punching and stacking machine - 760 x 530 mm (30 x 21") | GN760
The GN760 is a plug-assist thermoformer manufactured by GN Plastics. Its key features include an in-mould cutting; special plug drive that has integrated twin servo motors; heat system that has 60 zones; robotic handling mechanism; and power regeneration system that allows an energy-efficient performance.
Additionally, the thermoformer can be equipped with additional accessories such as the material pre-heating mechanism and the motorized material unwind device.
Additionally, the thermoformer can be equipped with additional accessories such as the material pre-heating mechanism and the motorized material unwind device.
Packaging thermoformer - 482 x 355 mm (19 x 14") | GN1914DM
The GN1914DM is a Dual Mold Thermoforming Machine that consists of multi-zone upper and lower ovens. It thermoforms components to 6 inches in depth in two negative molds, each with...
Packaging thermoformer - 482 x 355 mm (19 x 14") | GN1914DM
The GN1914DM is a Dual Mold Thermoforming Machine that consists of multi-zone upper and lower ovens. It thermoforms components to 6 inches in depth in two negative molds, each with a forming area of 482 mm x 355 mm.
It uses in-mold trim to ensure production of all the similar components while maintaining the costs of tooling at a fraction of other in-mold cutting systems. The components are held by a robotic part handling system guaranteeing the stable and reliable transmission of stacked product.
It also features a built-in diagnostic system, rapid tool changes, positive and negative forming, a robotic product handling system and ovens that have an infrared heating system.
It uses in-mold trim to ensure production of all the similar components while maintaining the costs of tooling at a fraction of other in-mold cutting systems. The components are held by a robotic part handling system guaranteeing the stable and reliable transmission of stacked product.
It also features a built-in diagnostic system, rapid tool changes, positive and negative forming, a robotic product handling system and ovens that have an infrared heating system.
Packaging thermoformer - 760 x 530 mm (30 x 21") | GN3021DX
The GN3021DX is a thermoformer from GN Plastics' contact heat series. Its key features include an in-mould cutting that guarantees...
Packaging thermoformer - 760 x 530 mm (30 x 21") | GN3021DX
The GN3021DX is a thermoformer from GN Plastics' contact heat series. Its key features include an in-mould cutting that guarantees precise trim; a servo-driven platen that allows an energy saving motion; four point toggle systems that has built-in enormous roller bearings; and an integrated superior speed forming system, multi-zone contact heating system and microprocessor-based control system.
Additionally, it has a maximum forming area of 760 mm x 530 mm and a maximum draw depth of 125 mm.
Additionally, it has a maximum forming area of 760 mm x 530 mm and a maximum draw depth of 125 mm.
Packaging thermoformer - 915 x 635 mm (36 x 25") | GN3625DX
The GN3625DX is a thermoformer from GN Plastics' contact heat series. Its key features include an in-mould cutting that guarantees precise...
Packaging thermoformer - 915 x 635 mm (36 x 25") | GN3625DX
The GN3625DX is a thermoformer from GN Plastics' contact heat series. Its key features include an in-mould cutting that guarantees precise trim; a servo-driven platen that allows an energy saving motion; six point toggle systems that has built-in enormous roller bearings; and an integrated superior speed forming system, multi-zone contact heating system and microprocessor-based control system.
Additionally, it has a maximum forming area of 915 mm x 635 mm, a maximum draw depth of 125 mm and a sheet width of 965 mm.
Additionally, it has a maximum forming area of 915 mm x 635 mm, a maximum draw depth of 125 mm and a sheet width of 965 mm.
Packaging thermoformer - 762 x 762 mm (30 x 30") | GN3030D
The GN3030D is a thermoformer from GN Plastics' contact heat series. Its key features include an in-mould cutting that guarantees...
Packaging thermoformer - 762 x 762 mm (30 x 30") | GN3030D
The GN3030D is a thermoformer from GN Plastics' contact heat series. Its key features include an in-mould cutting that guarantees precise trim; a servo-driven platen that allows an energy saving motion; six point toggle systems that has built-in enormous roller bearings; and an integrated superior speed forming system, multi-zone contact heating system and microprocessor-based control system.
Additionally, it has a maximum forming area of 762 mm x 762 mm, and a maximum draw depth of 125 mm.
Additionally, it has a maximum forming area of 762 mm x 762 mm, and a maximum draw depth of 125 mm.
Vacuum thermoformer / for packaging - SUPRA
The Supra thermoforming machine is specially designed for mid to heavy duty operations in medical, food and non food processing. The system is capable of performing...
Vacuum thermoformer / for packaging - SUPRA
The Supra thermoforming machine is specially designed for mid to heavy duty operations in medical, food and non food processing. The system is capable of performing either rigid or flexible filming tasks. Due to its durable build, the machine is ideal for use with products with considerably large dimensions with regards to film width, advance and package depth.
All systems in the range are constructed with stainless steel and other corrosion-proof materials. This allows for easier cleaning and maintenance.
Customers may opt to avail of an optional gas flushing system or vacuum, for modified atmosphere packages.
All systems in the range are constructed with stainless steel and other corrosion-proof materials. This allows for easier cleaning and maintenance.
Customers may opt to avail of an optional gas flushing system or vacuum, for modified atmosphere packages.
Packaging thermoformer - OPTIMA
The OPTIMA Thermoformer from Ulma is made from corrosion-resistant materials for safe packing of food and medical materials. It has a stainless steel frame and its...
Packaging thermoformer - OPTIMA
The OPTIMA Thermoformer from Ulma is made from corrosion-resistant materials for safe packing of food and medical materials. It has a stainless steel frame and its design incorporates the latest hygiene and security requirements.
The OPTIMA Thermoformer has a flexible or rigid film with modified atmosphere (MAP) and vacuum options, which makes it one of the highest-performing thermoformers. Users can choose to use its vacuum or gas insert functions when packaging.
All the functions of the Thermoformer have been designed for high performance, enabling the users to adapt to different formats and production needs.
The OPTIMA Thermoformer has a flexible or rigid film with modified atmosphere (MAP) and vacuum options, which makes it one of the highest-performing thermoformers. Users can choose to use its vacuum or gas insert functions when packaging.
All the functions of the Thermoformer have been designed for high performance, enabling the users to adapt to different formats and production needs.
Packaging thermoformer - TFS 80
The TFS 80 hygienic thermoforming machine represents a highly compact and cost-effective solution for a variety of applications such as the packing of food, non-food products and medical supplies. This...
Packaging thermoformer - TFS 80
The TFS 80 hygienic thermoforming machine represents a highly compact and cost-effective solution for a variety of applications such as the packing of food, non-food products and medical supplies. This model offers a full range of benefits normally associated with larger machines such as improvements to product appearance, higher throughput and lower packaging costs.
This makes it well suited for users looking to make a transition from manual to automatic packaging. These units operate by making packages directly from two rolls of film and are equipped with vacuum and modified atmosphere (MAP) packaging functions, with a simple and fast format change for added flexibility, allowing use in operations with mixed production requirements or as support units for products with limited runs.
This makes it well suited for users looking to make a transition from manual to automatic packaging. These units operate by making packages directly from two rolls of film and are equipped with vacuum and modified atmosphere (MAP) packaging functions, with a simple and fast format change for added flexibility, allowing use in operations with mixed production requirements or as support units for products with limited runs.
Medical packaging thermoformer - TFS 200
Ulma's TFS 200 is a thermoforming machine that is made to stuff food, non-food and medical products and the package is made straightly by the unit through the rolls of film which can be rigid or flexible....
Medical packaging thermoformer - TFS 200
Ulma's TFS 200 is a thermoforming machine that is made to stuff food, non-food and medical products and the package is made straightly by the unit through the rolls of film which can be rigid or flexible. This series provides a good way to leap into automatic packaging from manual packaging as it offers advantages to save time and other costs while improving productivity. Moreover, this also offers rapid product loading and enhanced product layout. This product is ideal for mixed production requirements.
When it comes to its technical features, it contains IPC control system, operational diagnostics and stainless steel AISI 304; the parameters and error messages are displayed. It also offers programmable configurations and advanced speed with minimum maintenance.
When it comes to its technical features, it contains IPC control system, operational diagnostics and stainless steel AISI 304; the parameters and error messages are displayed. It also offers programmable configurations and advanced speed with minimum maintenance.
Packaging thermoformer - TFS 300
This hygienic thermo-forming machine is suitable for both rigid and flexible atmosphere and vacuum options. It is often regarded as the most economic solution, offering similar advantages as other thermo-formers....
Packaging thermoformer - TFS 300
This hygienic thermo-forming machine is suitable for both rigid and flexible atmosphere and vacuum options. It is often regarded as the most economic solution, offering similar advantages as other thermo-formers. The design chosen by the manufacturer supports the packing of food and non-food products, as well as medical ones.
Two rolls of film are used to create the package directly by the machine, while the film may be rigid or flexible depending on the application's requirements. Vacuuming with gas flushings is also available as an option, while the TFS series offers an ideal way to advance from manual to automatic packaging.
The characteristics of the machine make it highly desirable for mixed production requirements, since users can easily change the formats to meet customers' needs.
Two rolls of film are used to create the package directly by the machine, while the film may be rigid or flexible depending on the application's requirements. Vacuuming with gas flushings is also available as an option, while the TFS series offers an ideal way to advance from manual to automatic packaging.
The characteristics of the machine make it highly desirable for mixed production requirements, since users can easily change the formats to meet customers' needs.
Thermoforming machine - FORMA
Machine overview:
FORMA vacuum forming machines are dependable and easy to use. Forming can be produced efficiently and economically even with small or large batch sizes. The uniform wall thickness is achieved by the use pre-blowing in positive forming and pre-stretching technology in negative forming. The production process combines the best aspects of both pressure forming and vacuum...
Thermoforming machine - FORMA
Machine overview:
FORMA vacuum forming machines are dependable and easy to use. Forming can be produced efficiently and economically even with small or large batch sizes. The uniform wall thickness is achieved by the use pre-blowing in positive forming and pre-stretching technology in negative forming. The production process combines the best aspects of both pressure forming and vacuum forming technologies: exceptional precision and speed.
FORMA thermoforming machines produce uniform, high quality plastic packages and articles made from roll-fed thermoplastic materials like OPS, PVC, HIPS, PET, PP and other thermoformable films.
The PLC controlled automated functions allow for shortest cycles times and optimum contour definition. The robust design of all highly-stressed elements ensures continuous operation with constant availability and long-term production performance.
Depending on production demands machines are equipped with special designed finishing modules.
Features:
Compact design and small footprint
Economical production for small and large batch runs
Special design combines the most efficient pressure and vacuum forming
High output production due to short cycle times
Simple operation with minimum operator training
Fast tool change
Smooth operation and flexibility
Ergonomic design
Pre-blowing for uniform surface thickness
Change of forming area size by the use of reducing frame
Optional punch for forming deep negative products
Optional table cooling
Smooth operation and flexibility
FORMA vacuum forming machines are dependable and easy to use. Forming can be produced efficiently and economically even with small or large batch sizes. The uniform wall thickness is achieved by the use pre-blowing in positive forming and pre-stretching technology in negative forming. The production process combines the best aspects of both pressure forming and vacuum forming technologies: exceptional precision and speed.
FORMA thermoforming machines produce uniform, high quality plastic packages and articles made from roll-fed thermoplastic materials like OPS, PVC, HIPS, PET, PP and other thermoformable films.
The PLC controlled automated functions allow for shortest cycles times and optimum contour definition. The robust design of all highly-stressed elements ensures continuous operation with constant availability and long-term production performance.
Depending on production demands machines are equipped with special designed finishing modules.
Features:
Compact design and small footprint
Economical production for small and large batch runs
Special design combines the most efficient pressure and vacuum forming
High output production due to short cycle times
Simple operation with minimum operator training
Fast tool change
Smooth operation and flexibility
Ergonomic design
Pre-blowing for uniform surface thickness
Change of forming area size by the use of reducing frame
Optional punch for forming deep negative products
Optional table cooling
Smooth operation and flexibility