+7 (812) 645-08-06
Hydraulic injection molding machines: horizontal clamping unit
select brand
Horizontal injection molding machine / hydraulic - 500 - 4 000 t | Maxima
Maxima uses Milacron unique design to build tonnage over a ram in the center of platen but not do as other traditional machines do at the tie bars. Also Maxima MM is...
Horizontal injection molding machine / hydraulic - 500 - 4 000 t | Maxima
Maxima uses Milacron unique design to build tonnage over a ram in the center of platen but not do as other traditional machines do at the tie bars. Also Maxima MM is blessed with compact and rational construction for convenient operation. It will make more profit for investors and it is the optimum for larger plastic parts manufactures
Application Scope:
We combine the injection unit and clamp unit scientifically to meet customers requests. It widely applies to the following industries:
Automobile Industry
Housewares
Construction
Packing
Daily Consumption
Application Scope:
We combine the injection unit and clamp unit scientifically to meet customers requests. It widely applies to the following industries:
Automobile Industry
Housewares
Construction
Packing
Daily Consumption
Horizontal injection molding machine / hydraulic / two-platen - NRH series
The NRH series is an optimum clamping unit mechanism, developed by 3D motion & CAE techniques. The line is provided with minimized machine...
Horizontal injection molding machine / hydraulic / two-platen - NRH series
The NRH series is an optimum clamping unit mechanism, developed by 3D motion & CAE techniques. The line is provided with minimized machine length. This saves approximately 30% display space as to traditional toggle machine. It features an extended opening stroke function.
The unit is designed with an extended die service expectancy, without deformation. This is due to the hydraulic cylinder clamping parallelism. The unit also has a simple, precise control capability on clamping force setting, facilitating the use of different sizes of dies.
The unit is designed with an extended die service expectancy, without deformation. This is due to the hydraulic cylinder clamping parallelism. The unit also has a simple, precise control capability on clamping force setting, facilitating the use of different sizes of dies.
Horizontal injection molding machine / hydraulic / two-platen - NRH-L series
The Two Platen Machine is being utilized in a 3D optimized computation for the clamping mechanism. It is also suitable for conducting...
Horizontal injection molding machine / hydraulic / two-platen - NRH-L series
The Two Platen Machine is being utilized in a 3D optimized computation for the clamping mechanism. It is also suitable for conducting CAE analysis and integration of designs.
The machine has a reduced length for approx. 30%, thus can save the length and the installation space. It can perform a direct-pressure clamping through the use of the hydraulic cylinder, in order to extend the service expectancy of the Die. In addition, the equipment can shortened high-pressure clamping stroke.
The machine has a reduced length for approx. 30%, thus can save the length and the installation space. It can perform a direct-pressure clamping through the use of the hydraulic cylinder, in order to extend the service expectancy of the Die. In addition, the equipment can shortened high-pressure clamping stroke.
Horizontal injection molding machine / hydraulic / two-platen - NRH-D series
The NRH-D series is a line of two-platen machines that is manufactured by Nanrong. The series features a 3D dynamic computation, for the...
Horizontal injection molding machine / hydraulic / two-platen - NRH-D series
The NRH-D series is a line of two-platen machines that is manufactured by Nanrong. The series features a 3D dynamic computation, for the clamping mechanism, plus CAE analysis and compact construction.
It has a minimized machine length for approximately down to 30%, for saving the length and the installation space. It laso has expanded opening stroke with optional super-large opening stroke. The machine has a direct-pressure clamping directly with the use of Hydraulic Cylinder, for extending the service expectancy of the die.
It has a minimized machine length for approximately down to 30%, for saving the length and the installation space. It laso has expanded opening stroke with optional super-large opening stroke. The machine has a direct-pressure clamping directly with the use of Hydraulic Cylinder, for extending the service expectancy of the die.
Horizontal injection molding machine / hydraulic / two-platen - NRH-LD series
Two-Platen Machine NRH-LD series is a line of clamping units designed for 3D motion. This tool is capable...
Horizontal injection molding machine / hydraulic / two-platen - NRH-LD series
Two-Platen Machine NRH-LD series is a line of clamping units designed for 3D motion. This tool is capable of reducing machine lengths, which can save up to 30% display space, compared to conventional toggle machine.
It has an optionally wider opening stroke mechanism, and longer die service expectancy without deformation. Its fast clamping force is supported by its NRH special half nut clamping system.
It has an optionally wider opening stroke mechanism, and longer die service expectancy without deformation. Its fast clamping force is supported by its NRH special half nut clamping system.
Horizontal injection molding machine / hydraulic - NRT series
The NRT series is a horizontal injection molding machine that is specially manufactured for plastication and...
Horizontal injection molding machine / hydraulic - NRT series
The NRT series is a horizontal injection molding machine that is specially manufactured for plastication and the required normal injection speed. These molding machines are constructed with the aid of a computer CAE and is capable of analyzing and stimulation motion that is done in compliance to ral testing. This significantly optimizes the durability of the part that is to be molded making it a structure that is not easily deformed.
Horizontal injection molding machine / hybrid - 50 - 3 200 t
MULTIPOWER is a highly innovative technological product that optimally marries versatility and high level performances with maximum energy savings. While reaching...
Horizontal injection molding machine / hybrid - 50 - 3 200 t
MULTIPOWER is a highly innovative technological product that optimally marries versatility and high level performances with maximum energy savings. While reaching incredible efficiency it can provide energy savings up to 50% if compared to similar sized hydraulic machines.
With MULTIPOWER your energy saving is now measurable! The hybrid MULTIPOWER series machines represent the perfect combination of electric and hydraulic technologies, also applied to machines with substantial closing force, to provide exceptional moulding precision, and the highest level of repeatability during the entire process.
Range available: from 50 to 3200 tons.
With MULTIPOWER your energy saving is now measurable! The hybrid MULTIPOWER series machines represent the perfect combination of electric and hydraulic technologies, also applied to machines with substantial closing force, to provide exceptional moulding precision, and the highest level of repeatability during the entire process.
Range available: from 50 to 3200 tons.
Horizontal injection molding machine / hydraulic / toggle - 50 - 3 500 t | Unyka
UNYKA, available in the range from 50 to 3500 tons, is the line of traditional hydraulic machines for general purpose injection and the production of large items. Special attention...
Horizontal injection molding machine / hydraulic / toggle - 50 - 3 500 t | Unyka
UNYKA, available in the range from 50 to 3500 tons, is the line of traditional hydraulic machines for general purpose injection and the production of large items. Special attention was given to energy saving thanks to the hydraulic system based on a variable delivery pump with close loop. Extremely strong machine frame characterized by a clamp closing toggle system with steel links and special bronze bushings.
Tie bars nickel-chrome steel treated, deep ground and rolled. Generously dimensioned platen ejector, radial piston hydraulic motor for screw rotation. Injection movement actuated by two hydraulic cylinders for perfect alignment with the clamp unit
Tie bars nickel-chrome steel treated, deep ground and rolled. Generously dimensioned platen ejector, radial piston hydraulic motor for screw rotation. Injection movement actuated by two hydraulic cylinders for perfect alignment with the clamp unit
Horizontal injection molding machine / hydraulic / toggle - 160 - 800 t | Dynamika
The DYNAMIKA line is our special "Packaging" version of machines designed for high productivity applications, principally dedicated to the packaging industry and in general for the production of thin-walled items....
Horizontal injection molding machine / hydraulic / toggle - 160 - 800 t | Dynamika
The DYNAMIKA line is our special "Packaging" version of machines designed for high productivity applications, principally dedicated to the packaging industry and in general for the production of thin-walled items. Clamp unit characterized by a 5-point toggle clamping system with steel links and special bronze bushings. Clamping system controlled by hydraulic motor with close loop control via servovalve of clamping speed and in-line pressure. Electric screw motor. Injection movement actuated by two hydraulic cylinders for perfect alignment with the clamp unit. Hydraulic system based on a pump for accumulators recharge. Range available form 160 to 800 tons.
Horizontal injection molding machine / hydraulic / two-platen - 1 000 - 1 800 t | Duo
A line of two-platen injection machines suitable for the production of deep profile parts and big containers, thanks to the wide opening stroke. The special...
Horizontal injection molding machine / hydraulic / two-platen - 1 000 - 1 800 t | Duo
A line of two-platen injection machines suitable for the production of deep profile parts and big containers, thanks to the wide opening stroke. The special compact design allows maximum performance in the smallest space. Tie bars guided back and forth and completely independent from the moving platen movement. Locking nuts embedded in the fixed platen to ensure reliability during the locking action. Generously dimensioned platen ejector with simultaneous ejection and mould opening. Screw rotation operated by hydraulic motor in the standard version and electric motor for the Multipower version (on request). Injection actuated by two pistons parallel and symmetric to the injection unit. Hydraulic system based on double pumps and inverter controls that allow energy savings up to 40%.
Horizontal injection molding machine / rotating table / multi-component
A special line of injection machines with double or triple injection has been developed over the years in order to meet the specific requests in multi-component and bi-colour injection, in-mould assembling and over-moulding....
Horizontal injection molding machine / rotating table / multi-component
A special line of injection machines with double or triple injection has been developed over the years in order to meet the specific requests in multi-component and bi-colour injection, in-mould assembling and over-moulding. The application of complements such as the rotating table allows simultaneous injection of two or more plastic materials while the application of specific nozzles makes the machine suitable for co-injection: a technique that allows injection of two materials in sequence through the same nozzle.
This line is characterized by a wide range of technical solutions and configurations in the application of the second and third injection unit that can be either vertical or parallel to the main injection unit, oblique or on a self-supported base for side injection.
Available in the line UNYKA (hydraulic machines) or MULTIPOWER (hybrid technology).
This line is characterized by a wide range of technical solutions and configurations in the application of the second and third injection unit that can be either vertical or parallel to the main injection unit, oblique or on a self-supported base for side injection.
Available in the line UNYKA (hydraulic machines) or MULTIPOWER (hybrid technology).