+7 (812) 645-08-06
Equipment for injection molding machines
select brand
Pick-and-place robot / for injection presses - 60 - 150 t | EXZ-600 series
The fastest sprue picker shortens a molding cycle dramatically.
The kick remote control enables the operator to adjust kick stroke on the controller.
Fifty mold memory capacity realizes quick setups.
Servo-driven vertical axis
The first in the industry!The vertical axis is driven by a high power servo motor for fast sprue...
The kick remote control enables the operator to adjust kick stroke on the controller.
Fifty mold memory capacity realizes quick setups.
Servo-driven vertical axis
The first in the industry!The vertical axis is driven by a high power servo motor for fast sprue...
Pick-and-place robot / for injection presses - 60 - 150 t | EXZ-600 series
The fastest sprue picker shortens a molding cycle dramatically.
The kick remote control enables the operator to adjust kick stroke on the controller.
Fifty mold memory capacity realizes quick setups.
Servo-driven vertical axis
The first in the industry!The vertical axis is driven by a high power servo motor for fast sprue removal.
Rodless cylinder
Standard Rodless cylinder for the kick axis provides takeout of long parts,making the robot stylish and quick.
Linear guide
Linear guides for vertical and kick axes offers speedy motions with less vibration.
Grease drop prevention
A grease drop tray is provided under the kick linear guide.(The one for the vertical axis is optionally available.)
Standard remote control for the kick
Harmo's unique kick control allows the operator to adjust kick stroke with the handy controller with no necessity of getting up the press.This ensures safe and easy setups.
Cable track for the kick
A cable track is provided on the kick axis to protect cabling and tubing.
Smooth motions make the appearance nice.
Concentrated valve and flow controls
The valves and flow controls are concentrated on the operation side for user-friendliness.
Measure labels
BWD and FWD positions are shown by the red arrows on the measure labels,being recorded in the controller.
The kick remote control enables the operator to adjust kick stroke on the controller.
Fifty mold memory capacity realizes quick setups.
Servo-driven vertical axis
The first in the industry!The vertical axis is driven by a high power servo motor for fast sprue removal.
Rodless cylinder
Standard Rodless cylinder for the kick axis provides takeout of long parts,making the robot stylish and quick.
Linear guide
Linear guides for vertical and kick axes offers speedy motions with less vibration.
Grease drop prevention
A grease drop tray is provided under the kick linear guide.(The one for the vertical axis is optionally available.)
Standard remote control for the kick
Harmo's unique kick control allows the operator to adjust kick stroke with the handy controller with no necessity of getting up the press.This ensures safe and easy setups.
Cable track for the kick
A cable track is provided on the kick axis to protect cabling and tubing.
Smooth motions make the appearance nice.
Concentrated valve and flow controls
The valves and flow controls are concentrated on the operation side for user-friendliness.
Measure labels
BWD and FWD positions are shown by the red arrows on the measure labels,being recorded in the controller.
Cartesian robot / for injection presses - 350 - 450 mm | VIII series
Controller on the machine
New...
New...
Cartesian robot / for injection presses - 350 - 450 mm | VIII series
Controller on the machine
New controller HRS-30
Grip slide mechanism
New controller HRS-30
Grip slide mechanism
Cartesian robot / for injection presses - 450 - 800 mm | VWIII series
New controller HRS-30
Unique in the industry! Space saving double type arm
More space saving and lower price
Conventional...
Unique in the industry! Space saving double type arm
More space saving and lower price
Conventional...
Cartesian robot / for injection presses - 450 - 800 mm | VWIII series
New controller HRS-30
Unique in the industry! Space saving double type arm
More space saving and lower price
Conventional 4 types plus new turn type and 800 stroke type (12 types in total)
Chuck slide feature for hoop molding
Controller on machine for space saving (except T type)
VWIII-65TRA vertical home position wheel
Vertical and horizontal linear guides for 40% higher rigidity
Optional slim chuck
Optional 120mm higher vertical home position (standard in 800 stroke type)
Unique in the industry! Space saving double type arm
More space saving and lower price
Conventional 4 types plus new turn type and 800 stroke type (12 types in total)
Chuck slide feature for hoop molding
Controller on machine for space saving (except T type)
VWIII-65TRA vertical home position wheel
Vertical and horizontal linear guides for 40% higher rigidity
Optional slim chuck
Optional 120mm higher vertical home position (standard in 800 stroke type)
Cartesian robot / for injection presses - max. 2 kg, 195 - 400 mm | SH-400
Side entry robot for precision molding
Low overhead instillation
...
Low overhead instillation
...
Cartesian robot / for injection presses - max. 2 kg, 195 - 400 mm | SH-400
Side entry robot for precision molding
Low overhead instillation
...
Low overhead instillation
...
Cartesian robot / for injection presses - max. 2 kg, 315 - 750 mm | SH-700
Side entry robot for precision molding
Long stroke applicable for up to 50 tons of...
Long stroke applicable for up to 50 tons of...
Cartesian robot / for injection presses - max. 2 kg, 315 - 750 mm | SH-700
Side entry robot for precision molding
Long stroke applicable for up to 50 tons of...
Long stroke applicable for up to 50 tons of...
Cartesian robot / for injection presses - 15 - 300 t | Phoenix series
The Phoenix series offers take -times available for sprue separation and parts removal. Self-lubricating pneumatic drive system affords low maintenance, exceptional stability and reliability. This series of robots are constructed on modular principle to ensure high precision and lightness. The main arm rides...
Cartesian robot / for injection presses - 15 - 300 t | Phoenix series
The Phoenix series offers take -times available for sprue separation and parts removal. Self-lubricating pneumatic drive system affords low maintenance, exceptional stability and reliability. This series of robots are constructed on modular principle to ensure high precision and lightness. The main arm rides vertically on a linear slide-rail and slides horizontally (crosswise) on two roller guide-ways, no maintenance is required and smooth running and the elimination of play/slack is ensured. Travel cushions on the vertical axis minimize vibration and ensure smooth deceleration; hydraulic shock absorbers are fitted on the crosswise axis for efficient damping.
For maximum flexibility the arm can be easily adjusted to release runner/parts at the operator or the rear side of the machine.
Swing angle can be freely adjusted between 60 to 90 degree through a positive but easily adjusted location fitting on the cylinder-driven oscillating arm.
The manual clamp system on the Phoenix series of robots allowed them to swing clear of the mould area in seconds; without the use of tools built-in ratchet mechanism, which controls motion of the robot arm out of the mould area, enables easy mould changes or maintenance.
For maximum flexibility the arm can be easily adjusted to release runner/parts at the operator or the rear side of the machine.
Swing angle can be freely adjusted between 60 to 90 degree through a positive but easily adjusted location fitting on the cylinder-driven oscillating arm.
The manual clamp system on the Phoenix series of robots allowed them to swing clear of the mould area in seconds; without the use of tools built-in ratchet mechanism, which controls motion of the robot arm out of the mould area, enables easy mould changes or maintenance.
Pick-and-place robot / for injection presses - 50 - 200 t | ATLAS series
ATLAS series is applicable to all types of horizontal injection machine of 50~250T for take-out products and sprues. It has ranges of model 550/650/750/850, with two types of arms, single stage and telescopic type; Vertical Stroke: 550~850mm. It can be added with sub arm for three-plate...
Pick-and-place robot / for injection presses - 50 - 200 t | ATLAS series
ATLAS series is applicable to all types of horizontal injection machine of 50~250T for take-out products and sprues. It has ranges of model 550/650/750/850, with two types of arms, single stage and telescopic type; Vertical Stroke: 550~850mm. It can be added with sub arm for three-plate mold to clamp products and sprue at the same time. Its traverse axle can be driven by pneumatic cylinder, inverter motor or AC servo motor. After installed this robot, the productivity will be increased 20~30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
Structure:
Traverse axle can be driven by rodless cylinder or inverter motor, AC servo motor is optional. Vertical and Crosswise driven by pneumatic cylinder. Traverse axle and vertical arm are applied with advanced high rigidity linear slide rail, and light high rigidity alloy aluminum extrusion beam for Crosswise and Vertical axles. Integrating with linear guide and high rigidity bearing steel rod, it works with high speed, high efficiency, low vibration, and long use life.
Structure:
Traverse axle can be driven by rodless cylinder or inverter motor, AC servo motor is optional. Vertical and Crosswise driven by pneumatic cylinder. Traverse axle and vertical arm are applied with advanced high rigidity linear slide rail, and light high rigidity alloy aluminum extrusion beam for Crosswise and Vertical axles. Integrating with linear guide and high rigidity bearing steel rod, it works with high speed, high efficiency, low vibration, and long use life.
Cartesian robot / for injection presses - 50 - 550 t | BOMARC series
BOMARC is applicable to all types of horizontal injection machine of 50-550T for take-out products and sprues. It has single stage and telescopic type; It can be added a sub-arm for 3-plates mold to grip products and sprue at the same time. Vertical stroke: 650-1150mm, driven by pneumatic cylinder. For standard model,...
Cartesian robot / for injection presses - 50 - 550 t | BOMARC series
BOMARC is applicable to all types of horizontal injection machine of 50-550T for take-out products and sprues. It has single stage and telescopic type; It can be added a sub-arm for 3-plates mold to grip products and sprue at the same time. Vertical stroke: 650-1150mm, driven by pneumatic cylinder. For standard model, the traverse axle driven by inverter motor, AC servo motor is optional. Vertical and crosswise driven by pneumatic cylinder, cost-effective. According actual requirements, you can choose AC servo motor driven on product arm to increase efficiency. After installed Bomarc robot, the productivity will be increased 20~30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
Structure
Traverse axle can be driven by rodless cylinder or inverter motor, AC servo motor is optional. Vertical and Crosswise driven by pneumatic cylinder. Traverse axle and vertical arm are applied with advanced high rigidity linear slide rail, and light high rigidity alloy aluminum extrusion beam for Crosswise and Vertical axles. Integrating with linear guide and high rigidity bearing steel rod, it works with high speed, high efficiency, low vibration, and long use life.
Structure
Traverse axle can be driven by rodless cylinder or inverter motor, AC servo motor is optional. Vertical and Crosswise driven by pneumatic cylinder. Traverse axle and vertical arm are applied with advanced high rigidity linear slide rail, and light high rigidity alloy aluminum extrusion beam for Crosswise and Vertical axles. Integrating with linear guide and high rigidity bearing steel rod, it works with high speed, high efficiency, low vibration, and long use life.
Cartesian robot / for injection presses - 50 - 4 000 t | COBRA series
COBRA series is applicable to all types of horizontal injection molding machine ranging from 300t to 4000t for take-out of products and sprues. It has single stage and telescopic type; It can be added a sub-arm for 3-plates mold to grip products and sprue at the same time. Vertical stroke: 1200-3000mm, driven by pneumatic cylinder. For standard...
Cartesian robot / for injection presses - 50 - 4 000 t | COBRA series
COBRA series is applicable to all types of horizontal injection molding machine ranging from 300t to 4000t for take-out of products and sprues. It has single stage and telescopic type; It can be added a sub-arm for 3-plates mold to grip products and sprue at the same time. Vertical stroke: 1200-3000mm, driven by pneumatic cylinder. For standard model, the traverse axle driven by inverter motor, AC servo motor is optional. Vertical and crosswise driven by pneumatic cylinder, cost-effective. According actual requirements, you can choose AC servo motor driven on product arm to increase efficiency. After installed Cobra robot, the productivity will be increased 20~30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
Structure
Traverse axle can be driven by rodless cylinder or inverter motor, AC servo motor is optional. Vertical and Crosswise driven by pneumatic cylinder. Traverse axle, crosswise and vertical arm are applied with advanced high rigidity linear slide rail, and light high rigidity alloy aluminum extrusion beam for Crosswise and Vertical axles. Integrating with linear guide and high rigidity bearing steel rod, it works with high speed, high efficiency, low vibration, and long use life. Optimum grouped design, high interchangeability between all parts and components.
Structure
Traverse axle can be driven by rodless cylinder or inverter motor, AC servo motor is optional. Vertical and Crosswise driven by pneumatic cylinder. Traverse axle, crosswise and vertical arm are applied with advanced high rigidity linear slide rail, and light high rigidity alloy aluminum extrusion beam for Crosswise and Vertical axles. Integrating with linear guide and high rigidity bearing steel rod, it works with high speed, high efficiency, low vibration, and long use life. Optimum grouped design, high interchangeability between all parts and components.
Pick-and-place robot / for injection presses - 50 - 550 t | Redstone series
Redstone series is applicable to all types of horizontal injection machine from 50 to 500 tons. Full AC servo motor driven on each axis, take-out at super high-speed(0.48sec.) and dry cycle time within 4.8seconds. It constantly positions the robot arm and end-of-arm tooling to degrees of accuracy within ±0.15mm. Program can be taught. The motion can be...
Pick-and-place robot / for injection presses - 50 - 550 t | Redstone series
Redstone series is applicable to all types of horizontal injection machine from 50 to 500 tons. Full AC servo motor driven on each axis, take-out at super high-speed(0.48sec.) and dry cycle time within 4.8seconds. It constantly positions the robot arm and end-of-arm tooling to degrees of accuracy within ±0.15mm. Program can be taught. The motion can be...
Die splitter automatic - 190 - 480 mm | EWT 2000
Die Splitter - EWT 2000
Safe and Parallel Opening of Aluminium Extrusion Dies
Simplified...
Safe and Parallel Opening of Aluminium Extrusion Dies
Simplified...
Die splitter automatic - 190 - 480 mm | EWT 2000
Die Splitter - EWT 2000
Safe and Parallel Opening of Aluminium Extrusion Dies
Simplified Disassembly of Hollow-Chamber Dies - Operational Safety System
The - Automated Die Splitting System- EWT2000 is a system where dies can be quick, parallel, carefully and reliably disassembled.
Standard System for dies from 190 to 480 mm
Safe and Parallel Opening of Aluminium Extrusion Dies
Simplified Disassembly of Hollow-Chamber Dies - Operational Safety System
The - Automated Die Splitting System- EWT2000 is a system where dies can be quick, parallel, carefully and reliably disassembled.
Standard System for dies from 190 to 480 mm
