+7 (812) 645-08-06
Refrigeration circuit components
select brand
Liquid receiver for refrigeration circuit - RL, RL-V series
TECHNICAL INFORMATION
The main applications of our liquid receivers are the storage of full charge of refrigerant in case of intervention
on the plant and the absorbtion of the load variations system.
Liquid...
The main applications of our liquid receivers are the storage of full charge of refrigerant in case of intervention
on the plant and the absorbtion of the load variations system.
Liquid...
Liquid receiver for refrigeration circuit - RL, RL-V series
TECHNICAL INFORMATION
The main applications of our liquid receivers are the storage of full charge of refrigerant in case of intervention
on the plant and the absorbtion of the load variations system.
Liquid receivers RL and RL-V have a storage volumes varying from about 5 to 760 litres.
Liquid receivers up to 5000 litres are available on request (please contact our Sales Department).
Two series are available:
- Horizontal liquid receivers RL.
- Vertical liquid receivers RL-V and RV.
Dimensional data contained in this catalogue are to be intended indicative taking into account the
manufacturing tolerances. We reserve the right to make changes to this catalogue without prior notice.
MATERIALS
Standard construction of RL and RL-V liquid receivers is carbon steel.
Refrigerant side connections are soldering or Rotalock type.
The main applications of our liquid receivers are the storage of full charge of refrigerant in case of intervention
on the plant and the absorbtion of the load variations system.
Liquid receivers RL and RL-V have a storage volumes varying from about 5 to 760 litres.
Liquid receivers up to 5000 litres are available on request (please contact our Sales Department).
Two series are available:
- Horizontal liquid receivers RL.
- Vertical liquid receivers RL-V and RV.
Dimensional data contained in this catalogue are to be intended indicative taking into account the
manufacturing tolerances. We reserve the right to make changes to this catalogue without prior notice.
MATERIALS
Standard construction of RL and RL-V liquid receivers is carbon steel.
Refrigerant side connections are soldering or Rotalock type.
Plastic stopcock
The Talbot Pushfit plastic stoptaps from Atlantic Plastics are suited for PE pipes...
Plastic stopcock
The Talbot Pushfit plastic stoptaps from Atlantic Plastics are suited for PE pipes...
Gas separator / for refrigeration circuits / oil - max. 31 bar | OS-10
General
Depending on the operating conditions, a lack of lubricant...
Depending on the operating conditions, a lack of lubricant...
Gas separator / for refrigeration circuits / oil - max. 31 bar | OS-10
General
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Gas separator / oil / for refrigeration circuits - max. 31 bar | OS-35H
General
Depending on the operating conditions, a lack of lubricant...
Depending on the operating conditions, a lack of lubricant...
Gas separator / oil / for refrigeration circuits - max. 31 bar | OS-35H
General
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Gas separator / oil / for refrigeration circuits - max. 31 bar | OS-35F
General
Depending on the operating conditions, a lack of lubricant...
Depending on the operating conditions, a lack of lubricant...
Gas separator / oil / for refrigeration circuits - max. 31 bar | OS-35F
General
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Gas separator / oil / for refrigeration circuits - max. 31 bar | OS-67FH
General
Depending on the operating conditions, a lack of lubricant...
Depending on the operating conditions, a lack of lubricant...
Gas separator / oil / for refrigeration circuits - max. 31 bar | OS-67FH
General
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Oil separator / for gas / for refrigeration circuits - max. 31 bar | OS-104FY
General
Depending on the operating conditions, a lack of lubricant...
Depending on the operating conditions, a lack of lubricant...
Oil separator / for gas / for refrigeration circuits - max. 31 bar | OS-104FY
General
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage
Depending on the operating conditions, a lack of lubricant in the compressor crankcase will occur with the following consequences:
Too low an oil pressure
Bearing damage
Cylinder/piston damage
Motor damage