Other refrigeration systems

select brand


JULABO GmbH

Immersion cooler - +10 °C ... +30 °C | FD200

These flow-through coolers from JULABO work well with immersion, bridge-mounted and open bath circulators. With these...

Immersion cooler - +10 °C ... +30 °C | FD200

These flow-through coolers from JULABO work well with immersion, bridge-mounted and open bath circulators. With these coolers, the temperature range of the circulators is extended below the ambient temperature. The coolers offer advantages such as a small footprint, ease of operation, low energy requirements, etc.

The instruments are designed for existing cooling loop integration and prevent tap water usage for the cooling process.
Heatcraft Europe : Friga-Bohn - HK Refrigeration -

Refrigeration cassette - 1.5 - 9 kW | KRS / KRS-W

The KRS / KRS-W models, assembled by Heatcraft, are cassette type air heat exchangers that consist of vibration damper...

Refrigeration cassette - 1.5 - 9 kW | KRS / KRS-W

The KRS / KRS-W models, assembled by Heatcraft, are cassette type air heat exchangers that consist of vibration damper pads which are located under the motor to aid the device in reducing the noise level. These machines are powered by 6 motor speeds with 3 pre-wired as benchmark, allowing accurate settings of the air flow rate.

Furthermore, the product is able to hold an utmost 1.5 > 9 kW capacity with a R404A and glycol water as its fluid.

Monobloc refrigeration unit - 0.7 - 4.5 kW | EUROMON

The Euromon is a refrigeration monoblock unit manufactured by Heatcraft. that has a capacity...

Monobloc refrigeration unit - 0.7 - 4.5 kW | EUROMON

The Euromon is a refrigeration monoblock unit manufactured by Heatcraft. that has a capacity of 0.7 > 4.5 kW and R404A fluid. It offers a simple and fast induction method through simply sloting the monoblock unit in the top of the panel of the cold room. By securing it and plugging into an electric power point, the unit is ready for use.

Split system refrigeration unit - 0.9 - 3 kW | CLIMACAVE

These refrigeration split systems are specifically built for utilization in wine cellar air conditioning...

Split system refrigeration unit - 0.9 - 3 kW | CLIMACAVE

These refrigeration split systems are specifically built for utilization in wine cellar air conditioning...

Split system refrigeration unit - 0.6 - 4.7 kW | MINIFJORD

The Split System model has a series of unit cooler types that is suitable for...

Split system refrigeration unit - 0.6 - 4.7 kW | MINIFJORD

The Split System model has a series of unit cooler types that is suitable for a variety of specifications including cubic units (MUC-LUC) as well as ceiling units (MF and MR). It features a straightforward installation process and compliance with refrigeration requirements of cold rooms that reaches up to 35 m3.

Split system refrigeration unit - 0.5 - 12.2 kW | SPLIT VANGUARD

The Split Vanguard is a split system of cooling units manufactured by Heatcraft. These...

Split system refrigeration unit - 0.5 - 12.2 kW | SPLIT VANGUARD

The Split Vanguard is a split system of cooling units manufactured by Heatcraft. These units can be integrated to MR / MH ceiling units, TA dual-discharge and MUC-LUC / SKB cubic. These can cater optimum solutions for cooling rooms up to 170 m3. Furthermore, these systems are specifically designed for food service refrigeration.
APC MGE

Water cooling system / data center - 200 kW ... 1.2 MW | Hydronics series

The Hydronics module is a pre-fabricated cooled water piping system that simplifies the total structure of a chilled water data center. Each...

Water cooling system / data center - 200 kW ... 1.2 MW | Hydronics series

The Hydronics module is a pre-fabricated cooled water piping system that simplifies the total structure of a chilled water data center. Each module is created for variable primary flow (VPF), incorporating leading regulatory systems and management software for maximum efficiency. It consists of a piping system, pumps, and controls encased into an enclosure or skid to support outside chillers. These modules come in a variety of sizes and designs that meet Tier II and III with UPS and thermal storage accesories that deliver continuous cooling.

Humidity cooling system / data center - 23 - 168 kW | Uniflair LE

Uniflair LE provides perimeter cooling for medium and large sized data center applications, with temperature and humidity maintained with particularly...

Humidity cooling system / data center - 23 - 168 kW | Uniflair LE

Uniflair LE provides perimeter cooling for medium and large sized data center applications, with temperature and humidity maintained with particularly tight tolerances. The status of components and all environmental parameters are intelligently monitored, so that optimum functionality is ensured for all operation modes. These features make the Uniflair LE suitable for racked and non-racked IT loads. This cooling system may also be used in conjunction with hot or cold aisle containment solutions to attain further improvements in efficiency and higher densities.

Data center cooling system - max. 400 kW | EcoBreeze

The Ecobreeze™ air economizer is a pre-engineered and tried item that is intended to meet the stretching prerequisites for data center effectiveness. Ecobreeze gives different modes...

Data center cooling system - max. 400 kW | EcoBreeze

The Ecobreeze™ air economizer is a pre-engineered and tried item that is intended to meet the stretching prerequisites for data center effectiveness. Ecobreeze gives different modes of economization to amplify vitality productivity throughout the year. Moreover, it can use a supplemental mechanical cooling circuit to keep up the data center cooling set on the most exceedingly awful of surrounding conditions.

Accessible in a 20ft (6m) or a 40ft (12m) ISO outline, the secluded configuration considers adaptability in 50kw augmentations up to 400kw of aggregate cooling limit. The smart controls and excess parts of Ecobreeze air economizers keep up unwavering quality and accessibility throughout the modulating conditions.

Data center cooling system - 5 - 20 kW | Uniflair AM

Uniflair AM is a versatile choice for smaller IT environments. The airconditioning unit is deal for use in computer...

Data center cooling system - 5 - 20 kW | Uniflair AM

Uniflair AM is a versatile choice for smaller IT environments. The airconditioning unit is deal for use in computer rooms, telecom rooms, control rooms due to its quiet and perimeter cooling design. It is cost-effective and energy-efficient. It is suitable for racked and non-racked IT loads. The microprocessor controller has a high-accuracy temperature control. The fan's speed control provides airflow delivery suited for various applications.

Wall-mounted cooling system - 6 - 12 kW | Uniflair MB

The Uniflair MB is a totally independent wall mounted cooling device on the exterior of a conditioned area just like a telecom...

Wall-mounted cooling system - 6 - 12 kW | Uniflair MB

The Uniflair MB is a totally independent wall mounted cooling device on the exterior of a conditioned area just like a telecom covering and can be shipped completely charged without the need for a heat exchanger.
Additionally, these constantly deployable units perform with simple electrical wiring and mounting to the shelter and can be accessed as a free cooling unit. These units comprise of motorized dampers that guarantee usage of external air for cooling the IT area.
{{item.name}}