+7 (812) 645-08-06
Knife valves, gate valves
select brand
Gate valve / handwheel / cast iron / flange - DN 40 - 300, PN 10 - 16, -10 °C ... +110 °C | 185 series
This unit features a full and total bore and has a tough body of stainless steel with a non-rising stem. It moves anticlockwise to close with a suitable...
Gate valve / handwheel / cast iron / flange - DN 40 - 300, PN 10 - 16, -10 °C ... +110 °C | 185 series
This unit features a full and total bore and has a tough body of stainless steel with a non-rising stem. It moves anticlockwise to close with a suitable sliding pad of up to DN200 to facilitate the wedge movement. The body is ductile iron which is EPDM-coated with heel positioning and no retention area.
It features an NBR bonnet protection with 3 NBR o-ring on the stem and the possibility to change the stem gasket under pressure. The epoxy painting is a 5005 color of 250pm thickness with a dust-coat on the stem and a square drive unit. This product is ISO PN10/16 certified.
It features an NBR bonnet protection with 3 NBR o-ring on the stem and the possibility to change the stem gasket under pressure. The epoxy painting is a 5005 color of 250pm thickness with a dust-coat on the stem and a square drive unit. This product is ISO PN10/16 certified.
Knife gate valve / handwheel / cast iron / flange - DN 50 - 800, PN 2 - 10, -10 °C ... +90 °C | 170 series
The Flange threaded ball valve is designed to replace the conventional multiple-valves connections. It has a lifting and twisting...
Knife gate valve / handwheel / cast iron / flange - DN 50 - 800, PN 2 - 10, -10 °C ... +90 °C | 170 series
The Flange threaded ball valve is designed to replace the conventional multiple-valves connections. It has a lifting and twisting body with non rising hand wheel.
This valve has complete crossing threaded lower holes and blind threaded holes on the top.
Moreover, the Iblok Series SB-DB-SBB-DBB Valves are designed in a single built-in body with floating ball that allows various functions.
These valves are ideally designed for mounting on vehicles or process pipes purposes.
This valve has complete crossing threaded lower holes and blind threaded holes on the top.
Moreover, the Iblok Series SB-DB-SBB-DBB Valves are designed in a single built-in body with floating ball that allows various functions.
These valves are ideally designed for mounting on vehicles or process pipes purposes.
Knife gate valve / handwheel / cast iron - DN 50 - 300, PN 6 - 10, -10 °C ... +90 °C | 176 series
This product comes with open and closed valve. It has rising rotating system and non rising lever or chain...
Knife gate valve / handwheel / cast iron - DN 50 - 300, PN 6 - 10, -10 °C ... +90 °C | 176 series
This product comes with open and closed valve. It has rising rotating system and non rising lever or chain handwheel. It has no tightness because its loose factor is 2% of Kvs, its between flanges is ISO PN10. It also comes with deflector which is optional. It is made of 50% epoxy and 50% polyester painting in blue color. It is also equipped with bipolar sensor 0 + C and voltage AC 15-240V.
Knife gate valve / bi-directional / handwheel / cast iron - DN 50 - 400, PN 4 - 10, -10 °C ... +90 °C | 178 series
The 178 series, which are manufactured by Sferaco, are bi-directional knife gate valves. It...
Knife gate valve / bi-directional / handwheel / cast iron - DN 50 - 400, PN 4 - 10, -10 °C ... +90 °C | 178 series
The 178 series, which are manufactured by Sferaco, are bi-directional knife gate valves. It is integrated with a hand wheel, and a non-elevating stem and its body is made out of 50% epoxy and 50% polyester with a coating of RAL 5005 blue paint. The unit features crossing threaded lower holes, and blind threaded upper holes, and is located between flanges ISO PN10.
Unidirectional valve / knife gate - DN050 - DN1200
The Knife Gate Valve is a uni-directional wafer valve suitable for general industries. It has a nominal width that ranges from DN050 to DN1200,...
Unidirectional valve / knife gate - DN050 - DN1200
The Knife Gate Valve is a uni-directional wafer valve suitable for general industries. It has a nominal width that ranges from DN050 to DN1200, with flange connections in accordance with EN 1092-2 PN10, or ANSI B16.5 as an alternative. Furthermore, the knife gate valve is equipped with a manually activated handwheel with rising or non-rising stem, hand lever drive, double and single acting pneumatic cylinders with spring return and electric actuators.
There are different types of knife gate valves to satisfy a wide range of uses.
There are different types of knife gate valves to satisfy a wide range of uses.
Knife gate valve / air-operated / for bulk materials - DN 150 - 250 | SGA series
The slide valves from Comav are ideally used to cut-off product flow. They are designed to provide an accurate outside sealing,...
Knife gate valve / air-operated / for bulk materials - DN 150 - 250 | SGA series
The slide valves from Comav are ideally used to cut-off product flow. They are designed to provide an accurate outside sealing, and can work with powder, granules and ground products. Also, the valves have the ability to balance the weights consistently when properly attached below the scales. The single or double-cylinder SGA1 and SGA2 slide valves can be controlled even when a product is present, ensuring an inner and outside sealing. DN150, DN200, DN250, UNI 2277-67 PN10 flanges are available sizes.
Knife gate valve / manual / for bulk materials - DN 150 - 250 | SGM series
The emergency gate valves are widely used as safety systems during maintenance work....
Knife gate valve / manual / for bulk materials - DN 150 - 250 | SGM series
The emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to empty the tank. The manually controlled SGM emergency gate comes in various sizes that include DN150, DN200, DN250, UNI 2277-67 PN10 flange.