+7 (812) 645-08-06
Screw pumps
select brand
Screw pump / for high-viscosity materials / for high-viscosity liquids / for crude oil - 1 - 130 m³/h, max. 16 bar | SLM
The SLM series engineered by Bornemann, is a multiphase pump, suitable for Pipeline, Wet Gas Compressions, Subsea Boosting and Up- and Midstream applications. This device...
Screw pump / for high-viscosity materials / for high-viscosity liquids / for crude oil - 1 - 130 m³/h, max. 16 bar | SLM
The SLM series engineered by Bornemann, is a multiphase pump, suitable for Pipeline, Wet Gas Compressions, Subsea Boosting and Up- and Midstream applications. This device...
Screw pump / direct-drive / for acid / bitumen/asphalt - 10 - 2 800 m³/h | W, V
The Series W / V is a range of twin-screw pumps which can be utilized in different aggressive media...
Screw pump / direct-drive / for acid / bitumen/asphalt - 10 - 2 800 m³/h | W, V
The Series W / V is a range of twin-screw pumps which can be utilized in different aggressive media applications. The line of self-priming pump is equipped with an external bearing and a rotary displacement feature. Through a capacity gpm rate ranging from 50 up to 12,300, the range is enabled to cater an array of applications under a speed that reaches up to 3.600 min-1 rpm.
Screw pump / high-pressure / vertical / horizontal - 100 - 4 500 m³/h | HC, VHC
The Bornemann HC/VHC Series of twin-screw pump is created through a two-piece framework construction with individually produced screws and shafts. This increases the interchange capacity...
Screw pump / high-pressure / vertical / horizontal - 100 - 4 500 m³/h | HC, VHC
The Bornemann HC/VHC Series of twin-screw pump is created through a two-piece framework construction with individually produced screws and shafts. This increases the interchange capacity of the pump while minimizing its probable maintenance cost.
The range's integration with a shaft which are completely designed out of stainless steel (a compliant of DIN rating 1.4542, ANSI 630 S.S), enables it to have chemical resistance . The screws, on the other hand, can be provided through an array of materials encompassing nodular iron, cast iron, stainless steel grades and bronze materials. When its comes to its pump housing, the Bornemann offers different materials to choose from to meet its application needs.
The range's integration with a shaft which are completely designed out of stainless steel (a compliant of DIN rating 1.4542, ANSI 630 S.S), enables it to have chemical resistance . The screws, on the other hand, can be provided through an array of materials encompassing nodular iron, cast iron, stainless steel grades and bronze materials. When its comes to its pump housing, the Bornemann offers different materials to choose from to meet its application needs.
Screw pump / transfer / for materials handling / for crude oil - 20 - 800 m³/h, max. 100 bar | HP
The HP Series of twin-screw pumps can be utilized in different industrial, pipeline, chemicals...
Screw pump / transfer / for materials handling / for crude oil - 20 - 800 m³/h, max. 100 bar | HP
The HP Series of twin-screw pumps can be utilized in different industrial, pipeline, chemicals and petrochemicals application. It is equipped with an external bearing feature and timing gear which can be lubricated through a lube oil. The pump does not necessitate for a cooling system, keeping the system reliable under whatever working condition it may be under with.
Screw pump / for low-viscosity liquids / for high-viscosity liquids / ATEX - max. 180 m³/h | SLI
The SLI series of twin-screw pump is ideal for applications with fluid that comes in any viscosity level, lubrication properties and contents. The...
Screw pump / for low-viscosity liquids / for high-viscosity liquids / ATEX - max. 180 m³/h | SLI
The SLI series of twin-screw pump is ideal for applications with fluid that comes in any viscosity level, lubrication properties and contents. The entire line can be altered in accordance to its user's temperature, speed, pressure specifications.
The twin-screw pump accommodates the flow of the processed liquid in an axial direction. It is capable of dispensing a minimal shear and low pulsation to different sensitive products to work on. Through a speed rate ranging from 200 rpm up to 3.000 rpm, the SLI series can be utilized in dealing with corrosive and lumpy liquids.
The twin-screw pump accommodates the flow of the processed liquid in an axial direction. It is capable of dispensing a minimal shear and low pulsation to different sensitive products to work on. Through a speed rate ranging from 200 rpm up to 3.000 rpm, the SLI series can be utilized in dealing with corrosive and lumpy liquids.
Progressive cavity pump / for viscous fluids - max. 600 l/h | JP-7032 - 7115.2
Dosing pumps for high viscous media
Type JP-7032 up to JP-7115.2
Almost pulsation free transport and small quantity dosing of
thin to high viscous, thixotropic, gaseous, solids and fibres containing,
aggressive...
Type JP-7032 up to JP-7115.2
Almost pulsation free transport and small quantity dosing of
thin to high viscous, thixotropic, gaseous, solids and fibres containing,
aggressive...
Progressive cavity pump / for viscous fluids - max. 600 l/h | JP-7032 - 7115.2
Dosing pumps for high viscous media
Type JP-7032 up to JP-7115.2
Almost pulsation free transport and small quantity dosing of
thin to high viscous, thixotropic, gaseous, solids and fibres containing,
aggressive...
Type JP-7032 up to JP-7115.2
Almost pulsation free transport and small quantity dosing of
thin to high viscous, thixotropic, gaseous, solids and fibres containing,
aggressive...
3-screw pump / self-priming - max. 120 bar | LMP
Due to its optimized design and special hardened materials, Spandau LMP pumps are clearly superior in mining...
3-screw pump / self-priming - max. 120 bar | LMP
Due to its optimized design and special hardened materials, Spandau LMP pumps are clearly superior in mining applications where almost all competitor's pumps fail in terms of mileage and pump downtime. The products are invaluable because cost-intensive downtime can be avoided and unnecessary maintenance intervals can be significantly reduced. The satisfaction of the customers all around the world confirms it.
Screw pump / high-pressure - max. 670 l/min, max. 120 bar | LMP
The LMP is made of flake-graphite cast iron/steel, while the screw housing is covered and the spindles have heavy duty steel...
Screw pump / high-pressure - max. 670 l/min, max. 120 bar | LMP
The LMP is made of flake-graphite cast iron/steel, while the screw housing is covered and the spindles have heavy duty steel treatment. It also comes with positive displacement pumps, a unified pressure restriction valve and the pressure connection is above the reserve plate. The flexible immersion depth because of the intake tube and the basic motors also comes with a frequency converter. It has a seal for deployment inside and outside the basin and it has axial counterbalancing thrust.