+7 (812) 645-08-06
Rotary lobe pumps
select brand
Rotary lobe pump / for hygienic applications - max. 50 m³/h | BLK 4-T
The BLK 4-T is a hygienic rotary lobe pump that is commonly used in transporting food products. It is capable of generating...
Rotary lobe pump / for hygienic applications - max. 50 m³/h | BLK 4-T
The BLK 4-T is a hygienic rotary lobe pump that is commonly used in transporting food products. It is capable of generating a pressure capacity if up to 7 bar. This pump can monitor the process through its pumping chamber window. It has detachable connectors that enables the user to choose the most efficient configuration utilizing parts that are needed. The attachment brackets can be altered so as to position the orifices in a horizontal or vertical manner.
Internal-gear pump / rotary lobe / gerotor
The Rotary Piston Lobe Type Pumps produced by PMPO have internal gears with lobe-type gear-teeth. These are discreetly operated units that feature an active and manageable flow.
The PMPO has...
The PMPO has...
Internal-gear pump / rotary lobe / gerotor
The Rotary Piston Lobe Type Pumps produced by PMPO have internal gears with lobe-type gear-teeth. These are discreetly operated units that feature an active and manageable flow.
The PMPO has two model of pumps. The pressure pumps, with a displacement from 0.3 to 2 cc, have a designed pressure of until 120 bar. They also have a standard rotation speed of until 3000 rpm, including a small size or external diameter of 6 cm. The flow-rate pumps, on the other hand, with a displacement from 2.7 to 8 cc, have a pressure of until 20 bar. These have a standard rotation speed of 7000 rpm, including a small size or external diameter of 6 cm.
The given models can be modified by inverting its rotation direction. Moreover, these pumps are self-lubricating and have a long service life.
The PMPO has two model of pumps. The pressure pumps, with a displacement from 0.3 to 2 cc, have a designed pressure of until 120 bar. They also have a standard rotation speed of until 3000 rpm, including a small size or external diameter of 6 cm. The flow-rate pumps, on the other hand, with a displacement from 2.7 to 8 cc, have a pressure of until 20 bar. These have a standard rotation speed of 7000 rpm, including a small size or external diameter of 6 cm.
The given models can be modified by inverting its rotation direction. Moreover, these pumps are self-lubricating and have a long service life.
Internal-gear pump / rotary lobe / gerotor - 120 bar, 0.3 - 2 l/min
The PMPO standard pump is designed with plain fittings, including inlet and outlet units at the base of the opposite lateral of the drive shaft. Its inlet and...
Internal-gear pump / rotary lobe / gerotor - 120 bar, 0.3 - 2 l/min
The PMPO standard pump is designed with plain fittings, including inlet and outlet units at the base of the opposite lateral of the drive shaft. Its inlet and...
Gerotor pump / internal-gear / rotary lobe - 100 bar, 0.3 - 2 L/min
The pump is designed with 2 additional intakes (1 for each direction of rotation) internally located in the pump's body. The pump is typically used to feed a cylinder with inner rod. During the operation of...
Gerotor pump / internal-gear / rotary lobe - 100 bar, 0.3 - 2 L/min
The pump is designed with 2 additional intakes (1 for each direction of rotation) internally located in the pump's body. The pump is typically used to feed a cylinder with inner rod. During the operation of the cylinder, the pump initially takes volume into other chamber. It then takes the content of the tank to compensate the volume difference due to rod. The module features 4 mm inlet and outlet diameter and 15 mm center to center.
The two holes of 4.1 mm diameter are placed at 48 mm (a version with 4 holes is also available) distance to ix the pump to the distributor and/or engine. The pump features 59 mm external diameter and comes in variable height according to flow capacity from 29 to 33 mm. It also features 7 mm diameter shaft with 2.5 mm drive and 20 x 4 mm hub lid diameter.
The two holes of 4.1 mm diameter are placed at 48 mm (a version with 4 holes is also available) distance to ix the pump to the distributor and/or engine. The pump features 59 mm external diameter and comes in variable height according to flow capacity from 29 to 33 mm. It also features 7 mm diameter shaft with 2.5 mm drive and 20 x 4 mm hub lid diameter.
Rotary lobe pump / for viscous fluids - max. 300 m³/h | MG
ALBIN MG Rotary Lobe Pumps - positive displacement pumps with no valves. They are self-priming and can reach capacities of up to 300 m3/h.
Chambers are formed...
Chambers are formed...
Rotary lobe pump / for viscous fluids - max. 300 m³/h | MG
ALBIN MG Rotary Lobe Pumps - positive displacement pumps with no valves. They are self-priming and can reach capacities of up to 300 m3/h.
Chambers are formed in conjunction with the pump casing, with the synchronization of two rotors, rotating against each other. The suction end is for filling the chambers with the conveyed material; the discharge end is where the conveyed material reaches, moving with the direction of the flow. They offer speed-related capacity and reversible flow, where media flow can be reversed in any way, by changing the rotation direction.
The rubber-coating on the rotating lobes makes it possible to pump a variety of solids.
Chambers are formed in conjunction with the pump casing, with the synchronization of two rotors, rotating against each other. The suction end is for filling the chambers with the conveyed material; the discharge end is where the conveyed material reaches, moving with the direction of the flow. They offer speed-related capacity and reversible flow, where media flow can be reversed in any way, by changing the rotation direction.
The rubber-coating on the rotating lobes makes it possible to pump a variety of solids.