+7 (812) 645-08-06
Other pneumatic cylinders
select brand
Pneumatic actuator / linear / compact / heavy-duty - 10 - 200 mm, 50 - 500 mm/s | MGQ series
This device will solve the problem of linear-actuators bearing high loads. It is perfect for material handling application, and there are...
Pneumatic actuator / linear / compact / heavy-duty - 10 - 200 mm, 50 - 500 mm/s | MGQ series
This device will solve the problem of linear-actuators bearing high loads. It is perfect for material handling application, and there are two different types, self-lubricating slide bushing and linear ball bearing. The 100mm slide bushing version is capable of halting a load of 1300kg moving at 280mm/sq, or it can lift 450kg with a safety of 40%. In its entirety, the set is lightweight and small, and has pre-tapped holes for mounting. It can be mounted on the side of the bottom. The MCG has bore sizes measuring 12mm to 100mm and is able to switch.
Pneumatic cylinder / compact / guided - ø 16 - 100 mm | CMPG series
The guided compact cylinder series CMPG is a robust and practical
solution with a built-in guide unit. The rod guiding bushes are mounted
directly in the anodized aluminium...
solution with a built-in guide unit. The rod guiding bushes are mounted
directly in the anodized aluminium...
Pneumatic cylinder / compact / guided - ø 16 - 100 mm | CMPG series
The guided compact cylinder series CMPG is a robust and practical
solution with a built-in guide unit. The rod guiding bushes are mounted
directly in the anodized aluminium alloy lining.
Two guiding solutions are available: sintered bronze bushes coupled
with ground carbon chromed steel rods, or ball recirculation bushes
coupled with tempered, chromed and ground steel rods.
There are grooves on one side of the body to house the retractable
sensors.
In the non-cushioned version, the stop is silenced by NBR front gaskets,
and the cushioned version has adjustable pins to graduate braking.
Threaded holes and calibrated holes are provided for fixing the dowel
pins.
solution with a built-in guide unit. The rod guiding bushes are mounted
directly in the anodized aluminium alloy lining.
Two guiding solutions are available: sintered bronze bushes coupled
with ground carbon chromed steel rods, or ball recirculation bushes
coupled with tempered, chromed and ground steel rods.
There are grooves on one side of the body to house the retractable
sensors.
In the non-cushioned version, the stop is silenced by NBR front gaskets,
and the cushioned version has adjustable pins to graduate braking.
Threaded holes and calibrated holes are provided for fixing the dowel
pins.
Pneumatic cylinder / with guided piston rod - max. 10 bar, ISO 15552
Extended rod cylinders conforming to the standards of ISO 15552. Different models with a variety of accessories. The user can make a choice...
Pneumatic cylinder / with guided piston rod - max. 10 bar, ISO 15552
Extended rod cylinders conforming to the standards of ISO 15552. Different models with a variety of accessories. The user can make a choice between single-acting and double acting cylinder with or without rod. And the configuration comes either without the magnet or with is, depends on use. There are different gasket choices depending on the temperature used within the cylinders. The cylinders are available in three series and they vary according to the following parameters - shape of barrel and sensors used. Of course, custom versions are also available.
Pneumatic cylinder / short-travel - ø 12 - 100 mm | SSCY series
The Short-Stoke Cylinder Series is a compact cylinder type that are suitable for installation...
Pneumatic cylinder / short-travel - ø 12 - 100 mm | SSCY series
The Short-Stoke Cylinder Series is a compact cylinder type that are suitable for installation in limited or small spaces. It can be configured with or without magnet, single or double-acting and single or through-rod. You can choose from NBR, POLYURETHANE or FKM/FPM gaskets for an anti-rotation version with built-in fixings.
