+7 (812) 645-08-06
Desiccant compressed air dryers
select brand
Desiccant compressed air dryer - 3 - 240 acfm, 16 bar | DMD series
This equipment by Sullair DMD series is very light in weight and is equipped with modular desiccant dryer. It comes with immense flexibility...
Desiccant compressed air dryer - 3 - 240 acfm, 16 bar | DMD series
This equipment by Sullair DMD series is very light in weight and is equipped with modular desiccant dryer. It comes with immense flexibility for its installation and has ushered in a revolution in the compressed air technology so that specific needs and requirements of customers can be met efficiently. This equipment works by using dried and compressed air for the regeneration of saturated desiccant bed through expansion of air.
Its protection is built-in with surrounding aluminum housings for rendering protection from corrosion.
Its protection is built-in with surrounding aluminum housings for rendering protection from corrosion.
Desiccant compressed air dryer - 80 - 5 000 scfm | DHL series
The DHL series dryers feature a dual tower design that allows for continuous absorption of water from compressed air by utilizing a desiccant bed.
Drying is...
Drying is...
Desiccant compressed air dryer - 80 - 5 000 scfm | DHL series
The DHL series dryers feature a dual tower design that allows for continuous absorption of water from compressed air by utilizing a desiccant bed.
Drying is achieved by passing wet compressed air through the desiccant bed of one tower, which absorbs the moisture. The desiccant is then regenerated without the use of heat when a small amount of dry air is diverted from the outlet at near atmospheric pressure, successfully drying the wet bed.
The purge flow rate can be adjusted to suit the desired dew point. The dry air flows counter direction through the wet bed, so it can sweep all the water vapor that was previously absorbed by the desiccant.
Drying is achieved by passing wet compressed air through the desiccant bed of one tower, which absorbs the moisture. The desiccant is then regenerated without the use of heat when a small amount of dry air is diverted from the outlet at near atmospheric pressure, successfully drying the wet bed.
The purge flow rate can be adjusted to suit the desired dew point. The dry air flows counter direction through the wet bed, so it can sweep all the water vapor that was previously absorbed by the desiccant.
Desiccant compressed air dryer - 200 - 3 500 acfm | DEX series
The DEX desiccant has a dual tower design involving a drying tower and a regenerating tower for continuous absorption of moisture from compressed air. The DEX desiccant dryer...
Desiccant compressed air dryer - 200 - 3 500 acfm | DEX series
The DEX desiccant has a dual tower design involving a drying tower and a regenerating tower for continuous absorption of moisture from compressed air. The DEX desiccant dryer...
Desiccant compressed air dryer / blower purge - 500 - 10 000 acfm | DBP series
The inventive design and engineering of dual tower design of the DBP uses desiccant to absorb of water from compressed air continually....
Desiccant compressed air dryer / blower purge - 500 - 10 000 acfm | DBP series
The inventive design and engineering of dual tower design of the DBP uses desiccant to absorb of water from compressed air continually. The process of drying is conducted by allowing wet compressed air to pass through one of the towers to absorb moisture. The process followed is devised in an innovative way, where a blower is used to pass through ambient air via low watt density heater. As soon as this takes place in close vicinity of ambient pressure, the hot air goes through the wet bed thus resulting in the removal of water vapor.
Heatless desiccant compressed air dryer - max. 2 050 scfm | RDHL series
Rated at -40°F (-40°C) dew point at 100 psig (6.9 bar), these dryers are mounted on draggable...
Heatless desiccant compressed air dryer - max. 2 050 scfm | RDHL series
Rated at -40°F (-40°C) dew point at 100 psig (6.9 bar), these dryers are mounted on draggable...
Heat regenerative adsorption compressed air dryer / blower purge / high-performance - 212 - 6 360 cfm | BD+ series
Atlas Copco’s BD+ blower purge desiccant air dryers are designed for outstanding industrial performance and a long lifetime of reliable operation. They eliminate moisture completely before it can cause any damage to your compressed air net or production equipment. BD+ dryers use a combination of air from an external blower, heat and minimal compressed...
Heat regenerative adsorption compressed air dryer / blower purge / high-performance - 212 - 6 360 cfm | BD+ series
Atlas Copco’s BD+ blower purge desiccant air dryers are designed for outstanding industrial performance and a long lifetime of reliable operation. They eliminate moisture completely before it can cause any damage to your compressed air net or production equipment. BD+ dryers use a combination of air from an external blower, heat and minimal compressed...
Heat regenerative adsorption compressed air dryer / blower purge - 763 - 3 392 cfm | BD series
The Atlas Copco BD blower purge desiccant air dryer works with a combination setup that is made with energy-saving...
Heat regenerative adsorption compressed air dryer / blower purge - 763 - 3 392 cfm | BD series
The Atlas Copco BD blower purge desiccant air dryer works with a combination setup that is made with energy-saving features and a good dryer that cleans and has the potential to extend the life of the unit.
The smart design has been implemented to make all products easy to manage while working with a dewpoint that goes all the way down to -40 Celsius/Fahrenheit and it is made in an IP54 cubicle.
The smart design has been implemented to make all products easy to manage while working with a dewpoint that goes all the way down to -40 Celsius/Fahrenheit and it is made in an IP54 cubicle.
Heat-of-compression compressed air dryer - 1 980 - 12 960 m³/h | XD+ series
Atlas Copco made the XD desiccant dryer as a heat-of-compression unit that mixes a...
Heat-of-compression compressed air dryer - 1 980 - 12 960 m³/h | XD+ series
Atlas Copco made the XD desiccant dryer as a heat-of-compression unit that mixes a high dryer with less energy being used in the process. This is made with a good air quality setup with a ZH centrifugal setup and Z screw compressors to work with oil-free air compressors. This is also made with support at a dew point to -40C/F.
Heat regenerative adsorption compressed air dryer / blower purge - 763 - 3 392 cfm | AD series
The Atlas Copco AD unit is a desiccant air dryer that works for extensive operation functions and uses...
Heat regenerative adsorption compressed air dryer / blower purge - 763 - 3 392 cfm | AD series
The Atlas Copco AD unit is a desiccant air dryer that works for extensive operation functions and uses compressed air and heat to manage many unique forms of technology to work without wasting more energy than needed. This is all designed to work with care to handle a pressure dewpoint that goes down to -40 Celsius or Fahrenheit. It's also made with an IP54 protected body to keep the parts secure.
Heatless desiccant compressed air dryer - 68 - 3 392 cfm | CD series
Atlas Copco’s CD+ heatless desiccant dryers have a robust design
that guarantees a reliable operation, as well as the delivery...
that guarantees a reliable operation, as well as the delivery...
Heatless desiccant compressed air dryer - 68 - 3 392 cfm | CD series
Atlas Copco’s CD+ heatless desiccant dryers have a robust design
that guarantees a reliable operation, as well as the delivery...
that guarantees a reliable operation, as well as the delivery...
Desiccant compressed air dryer / in-line - 25 cfm, 0 - 125 psi | DAD-500
The Devilbiss DAD-500 is a brilliant state of the art concept. It features The three-stage desiccant unit provides the ultimate in clean , dry air. A step...
Desiccant compressed air dryer / in-line - 25 cfm, 0 - 125 psi | DAD-500
The Devilbiss DAD-500 is a brilliant state of the art concept. It features The three-stage desiccant unit provides the ultimate in clean , dry air. A step...