+7 (812) 645-08-06
Mist eliminators
select brand
Mist eliminator oil - UNIFIL® MD 100
High suction performance often means space-consuming design. Not with...
Mist eliminator oil - UNIFIL® MD 100
High suction performance often means space-consuming design. Not with UNIFIL MD - its modular design guarantees the largest possible filter surface at maximum performance.
UNFIL MD has all features of the UNIFIL range of products. Furthermore, this unit stands out by:
UNFIL MD has all features of the UNIFIL range of products. Furthermore, this unit stands out by:
Mist eliminator - DV 210+ series
Excellent performance of mist eliminators is very important for the success of the desulphurization unit: the fewer liquid particles pass the mist eliminator, the lower the environment...
Mist eliminator - DV 210+ series
Excellent performance of mist eliminators is very important for the success of the desulphurization unit: the fewer liquid particles pass the mist eliminator, the lower the environment pollution. When two stages are applied coarse and fine-separator are either mounted on 2 or ideally in a single layer of support beams. The installation on a single layer benefits installation time, total required absorber/ scrubber height thus reducing investment costs for the steelworks. Washing systems are completely integrated to the DV210+ modules, thus no separate support structure for the washing system is needed. For application with high cleaning requirements the DV210+ is equipped with both upstream and downstream cleaning devices.
Mist eliminator - DH 2100-FGD
FEATURES
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow....
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow....
Mist eliminator - DH 2100-FGD
FEATURES
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers.
Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the maintenance to a minimum.
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers.
Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the maintenance to a minimum.
Mist eliminator - DV 880
The DV 880 is typically used as 2-stage mist eliminator for medium to high liquid loadings, but it can also be applied on low liquid loads. It also proofed its reliability as a coarse eliminator in many high performing flue gas desulphurization absorber towers.
Mist eliminator - DV 270
The DV 270 (T 271) droplet separator is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator...
Mist eliminator - DV 270
The DV 270 (T 271) droplet separator is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained off as a result of gravity. V-shaped impressions on the separator plates ensure that the liquid is drained off in the correct manner, dropping back against the vertical gas stream into the sump.
Mist eliminator - DS 8200
FEATURES
The DS 8200 is designed for both - horizontal and vertical - flows. It removes a coarse particle spectrum, thus it can...
The DS 8200 is designed for both - horizontal and vertical - flows. It removes a coarse particle spectrum, thus it can...
Mist eliminator - DS 8200
FEATURES
The DS 8200 is designed for both - horizontal and vertical - flows. It removes a coarse particle spectrum, thus it can handle gas flows with a plugging risks.
It is used for gas velocities up to 8 to 12 m/s. A self-cleaning effect is caused through the rotation of liquid in the drain chamber of the equipment. In case that the application comprises a risk of plugging the eliminator, the equipment comes with an integrated cleaning device. The
equipment can eliminate an excessive amount of liquids.
The DS 8200 is designed for both - horizontal and vertical - flows. It removes a coarse particle spectrum, thus it can handle gas flows with a plugging risks.
It is used for gas velocities up to 8 to 12 m/s. A self-cleaning effect is caused through the rotation of liquid in the drain chamber of the equipment. In case that the application comprises a risk of plugging the eliminator, the equipment comes with an integrated cleaning device. The
equipment can eliminate an excessive amount of liquids.
Mist eliminator - 125 - 3000 scfm | PME series
Standard Differential Pressure Gauge mounted and piped
...
...
Mist eliminator - 125 - 3000 scfm | PME series
Standard Differential Pressure Gauge mounted and piped
Heavy duty ASME stamped pressure vessel
Long life mist eliminator element
Floor stand
Dedicated vent port for demand type drains
Heavy duty ASME stamped pressure vessel
Long life mist eliminator element
Floor stand
Dedicated vent port for demand type drains