+7 (812) 645-08-06
Solid state lasers: Nd:YAG, Ti:S...
select brand
Nd:YAG laser / pulsed / for drilling - CL-R
In an effort to help ensure continued use of the laser drilling systems, Convergent...
Nd:YAG laser / pulsed / for drilling - CL-R
In an effort to help ensure continued use of the laser drilling systems, Convergent has developed the CL-R laser, a direct field replacement for Nd:YAG lasers that are no longer supported by the original manufacturer. CL-R provides the added benefit of increasing throughput and reducing operating cost compared to older Nd:YAG lasers.
Nd:YAG laser / pulsed / for drilling - CL50k
The CL50k Nd:YAG laser is a design collaboration between Convergent Laser and Prima Power Laserdyne.
Designed...
Designed...
Nd:YAG laser / pulsed / for drilling - CL50k
The CL50k Nd:YAG laser is a design collaboration between Convergent Laser and Prima Power Laserdyne.
Designed specifically for precision hole drilling, percussion, drill-on-the-fly and trepanning, the CL50k delivers the highest peak power (50 kW) of any industrial pulsed Nd:YAG laser. It is unmatched for drilling deep and high aspect ratio holes at shallow entrance angles.
Designed specifically for precision hole drilling, percussion, drill-on-the-fly and trepanning, the CL50k delivers the highest peak power (50 kW) of any industrial pulsed Nd:YAG laser. It is unmatched for drilling deep and high aspect ratio holes at shallow entrance angles.
Compensation laser / Nd:YAG
Lasing materials of solid-state lasers are synthetic crystal rods. The rods are pumped with energy, typically from xenon flash lamps or laser diode stacks. Most solid-state lasers use resonator cavities with external mirrors. For industrial applications, the most commonly used laser crystals are made of Nd:YAG. These lasers operate in the near-infrared at a wavelength of 1.06 μm. Power output...
Compensation laser / Nd:YAG
Lasing materials of solid-state lasers are synthetic crystal rods. The rods are pumped with energy, typically from xenon flash lamps or laser diode stacks. Most solid-state lasers use resonator cavities with external mirrors. For industrial applications, the most commonly used laser crystals are made of Nd:YAG. These lasers operate in the near-infrared at a wavelength of 1.06 μm. Power output can be as high as 5 kilowatts. The uses of Nd:YAG lasers include cutting, drilling, welding, scribing, and engraving. Materials processed by Nd:YAG lasers include carbon resin, ceramics, most metals, and most plastics. YAG lasers often are used in industrial welding applications and are power-scaled by placing rods in series. Unlike CO2 systems, YAG lasers can deliver power via a fiber delivery system. While the output fiber (and beam diameter) is larger than with a fiber laser, they still offer more flexible beam delivery than CO2 lasers. Indeed, fiber delivery at high power levels has permitted the Nd:YAG into areas where there is limited overlap with CO2. Integration is also easier than with CO2 lasers because the fiber can be used with robots. Consequently, primary advantages to the YAG are lower wavelength and the ability to use robotics. In addition, YAGs have a low plasma plume and, therefore, require no shield gas. Disadvantages to this type of laser include poor wall plug efficiency of approximately 3 percent and a large footprint (relative to diode and fiber laser systems). This larger footprint is due to its large cooling system. YAGs also have adequate beam quality for welding but not for cutting (since the achievable energy density is lower).