+7 (812) 645-08-06

Solid state lasers: Diode lasers

select brand

Diode laser / conduction-cooled

From industry standard inch 1x1
footprint heat sinks to narrow
heat sink designs for side-byside
arrangements, DILAS offers
the broadest range of reliable
conduction-cooled...

Diode laser / conduction-cooled

From industry standard inch 1x1
footprint heat sinks to narrow
heat sink designs for side-byside
arrangements, DILAS offers
the broadest range of reliable
conduction-cooled easy-to-integrate
diode laser bars.

These are available as free-beam,
fast-axis collimated, fully collimated
or fiber-coupled modules and in
open design or sealed housings,
combined with appropriate soft
solder or CTE-matched hard-solder
technologies. Used for diodepumped
solid-state lasers (DPSSL)
in industry and defense, such highly
reliable devices are the key for many
mission-critical applications.

Diode laser / fiber-coupled

Easy to use, fiber-coupled modules are the foundation in many applications. DILAS fiber-coupled diode laser modules are a main component in applications such as pump sources...

Diode laser / fiber-coupled

Easy to use, fiber-coupled modules are the foundation in many applications. DILAS fiber-coupled diode laser modules are a main component in applications such as pump sources for
rod, fiber and disk lasers, therapeutic and diagnostic medical devices, defense, materials processing and graphic arts.
The compact size provides end users with a manageable footprint for integrating the device into any OEM system. With fiber core diameters as small as 100μm for single diode laser bars and scalable power levels for multi-bar modules up to kilowatt level, the product line of fiber-coupled modules offers highest brightness and power at all wavelengths, for all
applications.

Diode laser / quasi-continuous wave

Used as pumps for target designators and range finders, DILAS QCW stacks are field proven in countless regions, worldwide. These hard-soldered...

Diode laser / quasi-continuous wave

Used as pumps for target designators and range finders, DILAS QCW stacks are field proven in countless regions, worldwide. These hard-soldered devices have been tested at high temperatures, under thermal cycling as well as with shock and vibration. Hence, these pulsed diode laser modules offer highest robustness and quality you can rely on. Stacks in this powerful QCW product line are also utilized in large assemblies to produce high-energy laser beams for radiation physics and to facilitate laser-driven fusion for energy production.

Water-cooled laser diode array

DILAS offers a variety of horizontal diode laser modules from two to thirteen bars with standard wavelength of 808nm for CW or QCW operations....

Water-cooled laser diode array

DILAS offers a variety of horizontal diode laser modules from two to thirteen bars with standard wavelength of 808nm for CW or QCW operations.
These extremely powerful arrays are used primarily for pumping rod lasers. With a history of experience and proven material selection, these modules are long-lasting and a reliable part of day-to-day industrial applications.
DILAS horizontal stacks are utilized in the worldwide production of automotive and flat-panel
manufacturing, as well as in the welding of medical and industrial devices.

Diode laser system / for machining materials / laser / diode laser

DILAS Industrial Laser Systems offers full-featured, fiber-coupled diode laser systems for the industrial market for applications...

Diode laser system / for machining materials / laser / diode laser

DILAS Industrial Laser Systems offers full-featured, fiber-coupled diode laser systems for the industrial market for applications like soldering in photovoltaics and electronics, welding in the plastics and metal industry, as well as for hardening or brazing.
Worldwide support through application and service engineers, as well as dedicated application
laboratories for process proof and development provide our customers with the reassurance and technical advantages they need to focus on their production.

Diode laser / fiber-coupled / for optical pumping - 2495-L4 Series

The highly reliable JDSU 2495-L4 series diode lasers offer 4 W of laser power from a 105-μm fiber into a 0.22 numerical aperture (NA) at 808 nm. It is an ideal source for pumping solid-state materials such as Nd: YAG and Nd:Vanadate. In addition, a 4.5 W version is available at 812 nm for applications with broader wavelength tolerances such as medical and dental.
The L4 multimode pump module is based on single-emitter diode lasers, and allows for a radical departure from standard bar-based pumping architectures. Hundreds of watts of highly reliable pump power can be achieved with a distributed architecture using multiple L4 diode lasers and a multimode fiber coupler or fiber bundle. In a distributed architecture, cascading failure modes are avoided, and ensemble statistics can be used to predict pump assembly lifetimes. The L4 multimode pump module eases thermal management by distributing the diode lasers (heat sources), allowing for a simple air- or water-cooled architecture in laser pumps and direct diode applications.

Diode laser / fiber-coupled - 830 nm | 2486-L4 Series

The new high-brightness 2486-L4 series laser diodes offer up to 2 W from a 60-μm fiber into 0.22 numerical aperture (NA)—ideal for thermal printing and other applications that require high...

Diode laser / fiber-coupled - 830 nm | 2486-L4 Series

The new high-brightness 2486-L4 series laser diodes offer up to 2 W from a 60-μm fiber into 0.22 numerical aperture (NA)—ideal for thermal printing and other applications that require high brightness and a long life. The dramatic increase in output power, from the 60-micron fiber, also enables new technologies, such as flexography, illumination, and several material processing applications. The 2486-L4 series is available with customer-selectable fiber length and fiber termination, including bare fiber, SMA, and ST connectors.

Key Features
2 W output power
High reliability
60 μm aperture
0.22 NA
Isolated electrical contacts

Applications
Computer-to-plate printing
Flexographic printing
Illumination

Diode laser / power - 24xx Series

The 24xx series diode lasers represent a breakthrough in high continuous wave (CW) optical power and ultra high brightness with unsurpassed reliability. The small emitting aperture, combined with low beam divergence, makes the 24xx series the highest brightness family of CW diode lasers available in the industry.
The...

Diode laser / power - 24xx Series

Diode laser / power - 63xx Series

The 63xx series diode lasers represent an advancement in high continuous-wave (CW) optical power and ultrahigh brightness with unsurpassed reliability. The small emitting aperture, combined with low beam divergence, makes the 63xx series the highest brightness family of CW diode lasers available in the industry.
The...

Diode laser / power - 63xx Series

Diode laser / fiber-coupled - L4 series

JDSU L4-series diode lasers offer up to 10 W of power from a 105 μm fiber. The L4 is a revolutionary platform based on a long history of existing fiber-coupled L2 and L3 packages, incorporating a highly reliable design into a scalable commercial product.
L4 multimode pump modules offer high brightness, a small footprint, and simplified thermal management by distributing the diodes (heat sources), allowing the use of either air- or water-cooled architectures with predictable high reliability.
JDSU leverages existing manufacturing facilities around the world to offer a cost-effective solution with all the necessary and ideal attributes for the laser pump market.

Key Features
10 W output power
High reliability
105 μm aperture
0.22 or 0.15 NA
Isolated electrical contacts
L4i full-fiber feedback protection

Applications
Fiber laser pumping
Material processing
Graphic arts
Medical
Remote power generation
Pyrotechnic ignition

Diode laser module / line-cross generating - 532 - 1 064 | E series

Wavelengths: 532, 635, 640, 650, 670, 780, 850, 1064nm.
Optical...

Diode laser module / line-cross generating - 532 - 1 064 | E series

Wavelengths: 532, 635, 640, 650, 670, 780, 850, 1064nm.
Optical power: From < mW up to 25 mw.
Operation mode: CW.
Housing: Hard anodized Al �11x50mm.
Optics: A10, H18, A15, LLL (Line generation lens).

Diode laser head - PH-PPP-MMM-LC Series

PPP: pumping power | MMM: operation mode | CW or QCW | LC: laser crystal included optional.
Water cooled mount - No micro-channels are used.

Main Features
This compact laser pumping head consists of six water-cooled diode laser bars arranged radially around a central cavity suitable for accommodating a crystal laser rod as Nd:YAG. It shows excellent gain uniformity and lensing...