+7 (812) 645-08-06
RF connection components
select brand
RF isolator - 1 - 26.5 GHz
Pasternack RF isolators are used for protection of radio-frequency components from signal reflection and excessive current. They are passive 2-port devices that use microwaves. These coaxial RF isolators work...
RF isolator - 1 - 26.5 GHz
Pasternack RF isolators are used for protection of radio-frequency components from signal reflection and excessive current. They are passive 2-port devices that use microwaves. These coaxial RF isolators work as a one-way trap to cut off the load and the source. This traps or dissipates any reflected energy at the load. The ferrite and magnet construction of these devices determines the direction of flow of the entering signal. Their minimum isolation ratings are 16 dB and 20 dB.
Pasternack 50 ohm isolators come with N and SMA connections. The broadband coaxial isolators have the frequency capability between 1 GHz to 26.5 GHz. The rating depends on the type and style of the device. All have a very low insertion loss. These have 20 W of power and a maximum VSWR of 1.45:1. Most of them are REACH and RoHS compliant.
Pasternack 50 ohm isolators come with N and SMA connections. The broadband coaxial isolators have the frequency capability between 1 GHz to 26.5 GHz. The rating depends on the type and style of the device. All have a very low insertion loss. These have 20 W of power and a maximum VSWR of 1.45:1. Most of them are REACH and RoHS compliant.
Power divider / RF - 50 Ω
This 50 Ohm power dividers sometimes dubbed as power splitters by Pasternack Enterprises are passive units that distribute an agreed amount of power in a transmission line to a port, which permits a signal to be utilized in another circuit....
Power divider / RF - 50 Ω
This 50 Ohm power dividers sometimes dubbed as power splitters by Pasternack Enterprises are passive units that distribute an agreed amount of power in a transmission line to a port, which permits a signal to be utilized in another circuit. Adding to this, 50 Ohm power splitters prove useful for a wide range of RF applications such as offering a signal for measurement and test , blending feeds to and from ab antenna, dividing sent and received signals on phone lines and many more. Most of these power splitters by Pasternack Enterprises are REACH and Rohs certified.
This range of RF 50 Ohm power splitters by Pasternack Enterprises can be had in BNC, 2.92 mm, SMA or N connector configurations complete with 2 way, 3 Way, 4 Way, 6 Way, 8 Way or 12 way port choices. Adding to this, the power rantings for Pasternacks varied lineup are from 1 watt to 50 watts and the frequency ratings ring in from DC to 26.5 GHz.
This range of RF 50 Ohm power splitters by Pasternack Enterprises can be had in BNC, 2.92 mm, SMA or N connector configurations complete with 2 way, 3 Way, 4 Way, 6 Way, 8 Way or 12 way port choices. Adding to this, the power rantings for Pasternacks varied lineup are from 1 watt to 50 watts and the frequency ratings ring in from DC to 26.5 GHz.
Power divider / RF - 75 Ω
The RF 75 Ohm is a power divider manufactured by Pasternack. It is suitable for different RF applications, such as providing a signal for test and measurement, combining...
Power divider / RF - 75 Ω
The RF 75 Ohm is a power divider manufactured by Pasternack. It is suitable for different RF applications, such as providing a signal for test and measurement, combining feeds to and from an antenna, and splitting transmitted and received signals on phone lines.
The power splitter allows signal use in another circuit by connecting a certain amount of power in a transmission line to a port.
The RF75 is compliant of RoHS and REACH standards. It features BNC connector types with 2-, 4-, or 8-way port. The unit has a power rate that ranges from 1 Watt up to 1 Watts, and a freqency rate ranging from 2MHz up to 1GHz.
The power splitter allows signal use in another circuit by connecting a certain amount of power in a transmission line to a port.
The RF75 is compliant of RoHS and REACH standards. It features BNC connector types with 2-, 4-, or 8-way port. The unit has a power rate that ranges from 1 Watt up to 1 Watts, and a freqency rate ranging from 2MHz up to 1GHz.
RF coupler
The radiall SMT coupler range, now includes the new mini type (5.1 mm wide). These products have been designed for wireless applications such as signal distribution, power amplifiers and low noise amplifiers.
Coaxial wire switch
Manifold switching operations in transmitting and receiving stations for mobile communication, broadcasting, radar and satellite systems as well as medical devices are executed by changeover switches, 2-way switches (transfer switches) or step switches with electrically controlled or manual operation.
SPINNER 2-way switches use a hypocycloidic...
SPINNER 2-way switches use a hypocycloidic...
Coaxial wire switch
Manifold switching operations in transmitting and receiving stations for mobile communication, broadcasting, radar and satellite systems as well as medical devices are executed by changeover switches, 2-way switches (transfer switches) or step switches with electrically controlled or manual operation.
SPINNER 2-way switches use a hypocycloidic...
SPINNER 2-way switches use a hypocycloidic...
RF divider
Symmetrical splitters split an input signal into two or more even shares, whereas asymmetrical splitters break the input signal down into two different shares with a defined...
RF divider
Symmetrical splitters split an input signal into two or more even shares, whereas asymmetrical splitters break the input signal down into two different shares with a defined distribution relationship.
Different to directional couplers, the outputs of splitters are not isolated from each other. SPINNER splitters are characterised by their:
- compact design
- broad band operating frequency range
- low amplitude and phase difference on the outputs
- excellent passive intermodulation properties
Be it directional couplers or splitters, SPINNER solutions are unmatched, reliable, and maintenance-free. Enjoy the benefit!
Different to directional couplers, the outputs of splitters are not isolated from each other. SPINNER splitters are characterised by their:
- compact design
- broad band operating frequency range
- low amplitude and phase difference on the outputs
- excellent passive intermodulation properties
Be it directional couplers or splitters, SPINNER solutions are unmatched, reliable, and maintenance-free. Enjoy the benefit!
Combiner RF
Frequency combiners are used to de-couple two or several mobile communication channels with different frequencies, thus allowing several service providers to jointly use one antenna feeder cable or one antenna.
SPINNER supplies...
SPINNER supplies...
Combiner RF
Frequency combiners are used to de-couple two or several mobile communication channels with different frequencies, thus allowing several service providers to jointly use one antenna feeder cable or one antenna.
SPINNER supplies innovative diplexers, triplexers or multiplexers for all mobile communication systems in the frequency range 0 to 2,690 MHz that are currently in use. All combiners are bi-directional, so they can be used for combining and splitting the transmitting and receiving signals. Extremely low insertion loss, excellent de-coupling and superior intermodulation properties prevent mutual interference of neighbouring systems.
AISG/3GPP-compatible DC connections allow the transfer of control signals to the antenna and power supply to antenna pre-amplifiers. All frequency combiners are suitable for indoor and outdoor installation. Our product range includes brackets for mast and wall mounting.
SPINNER supplies innovative diplexers, triplexers or multiplexers for all mobile communication systems in the frequency range 0 to 2,690 MHz that are currently in use. All combiners are bi-directional, so they can be used for combining and splitting the transmitting and receiving signals. Extremely low insertion loss, excellent de-coupling and superior intermodulation properties prevent mutual interference of neighbouring systems.
AISG/3GPP-compatible DC connections allow the transfer of control signals to the antenna and power supply to antenna pre-amplifiers. All frequency combiners are suitable for indoor and outdoor installation. Our product range includes brackets for mast and wall mounting.