+7 (812) 645-08-06
Capacitors
select brand
Tantalum capacitor
Tantalum capacitors offer greater capacitance in a more compact form factor, along with superior...
Tantalum capacitor
Tantalum capacitors offer greater capacitance in a more compact form factor, along with superior temperature and DC bias characteristics compared with ceramic chip capacitors.
In addition, conductive polymer is used at the cathode for greater conductivity than conventional manganese dioxide, resulting in significantly lower ESR (Equivalent Series Resistance).
In addition, conductive polymer is used at the cathode for greater conductivity than conventional manganese dioxide, resulting in significantly lower ESR (Equivalent Series Resistance).
Chip capacitor / tantalum / ESR / with low serial equivalence resistance - TCO Series
Conductive Polymer Capacitors...
Chip capacitor / tantalum / ESR / with low serial equivalence resistance - TCO Series
Conductive Polymer Capacitors (TCO)
Conductive polymer is utilized at the cathode for significantly lower ESR.
Conductive polymer is utilized at the cathode for significantly lower ESR.
Chip capacitor / tantalum - TCFG Series
Fail-safe Open Structure Tantalum Capacitors (TCFG)
High-reliability series with built-in(open) mechanism that shuts OFF the current during overheating.
High-reliability series with built-in(open) mechanism that shuts OFF the current during overheating.
Ceramic capacitor - 4 - 50 V, 0,1µF - 100 µF
The TAIYO YUDEN ceramic capacitors feature voltages from 4 to 50 V and capacitance from 0.1 µF to 100 µF. They use nickel as electrode material and plating processing, offering better solderability...
Ceramic capacitor - 4 - 50 V, 0,1µF - 100 µF
The TAIYO YUDEN ceramic capacitors feature voltages from 4 to 50 V and capacitance from 0.1 µF to 100 µF. They use nickel as electrode material and plating processing, offering better solderability...
Ceramic capacitor - MLCC, COG, 16 -50 V, 0.5 - 330 pF
The high quality device by Taiyo Yuden is especially created with a rectangular-shaped...
Ceramic capacitor - MLCC, COG, 16 -50 V, 0.5 - 330 pF
The high quality device by Taiyo Yuden is especially created with a rectangular-shaped form coupled with a non-sharp edge design. The device evolves in good quality features which include the enhanced higher density mounting with a reliable monolithic structure. It also has a wide variety of values available in traditional case sizes.
Ceramic capacitor - MLCC, 0402, X7R, 4 - 50 V, 100 pF - 4.7 µF
The K250 by Taiyo Yuden is a multilayer ceramic capacitors which features its advanced...
Ceramic capacitor - MLCC, 0402, X7R, 4 - 50 V, 100 pF - 4.7 µF
The K250 by Taiyo Yuden is a multilayer ceramic capacitors which features its advanced and superior density mounting. Plus, it has a monolith structure which gives higher efficiency and a broad range of capability based on the available standard cases. For its application, it can be used in general electronic equipment.
Capacitor with low serial equivalence resistance / ESR - MLCC, 4 - 16 V, 0.1 - 10 µF | WK Series
These devices from Taiyo Yuden are designed with a low series resistance and induction level. They...
Capacitor with low serial equivalence resistance / ESR - MLCC, 4 - 16 V, 0.1 - 10 µF | WK Series
These devices from Taiyo Yuden are designed with a low series resistance and induction level. They are also engineered with a noise removal feature in the higher frequency levels which lead to a trimmed ripple voltage. Moreover, these small units are capable of a high capacitance level despite their size. These products are usable in applications concerning decoupling and filtering capacitors.
Ceramic capacitor - MLCC Array, 6.3 - 50 V, 10 pF - 2,2µF
The high density and high efficiency mounting device are used in general...
Ceramic capacitor - MLCC Array, 6.3 - 50 V, 10 pF - 2,2µF
The high density and high efficiency mounting device are used in general electronic equipment and communication equipment (cellular phone, wireless applications, etc.). It is built with internal electrodes made of nickel to ensure an enhanced cost performance and reliability.
Capacitor / dissipation factor / capacitance factor
The Standard Capacitor by Power High Voltage Test is specifically used in the volume and tan measurement...
Capacitor / dissipation factor / capacitance factor
The Standard Capacitor by Power High Voltage Test is specifically used in the volume and tan measurement of the capacitors, cables and bushings. The capacitor also allows an immense voltage of electrical bridge in the PD measurement which can also be used for the same purpose. It also features a powerful mechanical strength and good electrical performance incorporated with a robust anti-jamming capability.