+7 (812) 645-08-06
Capacitors
select brand
Chip capacitor / ceramic
The application of TDK's world-leading expertise in ferrite has yielded advanced electronic components, such as multi-layer ceramic capacitors, inductors, and EMC components. Focusing...
Chip capacitor / ceramic
The application of TDK's world-leading expertise in ferrite has yielded advanced electronic components, such as multi-layer ceramic capacitors, inductors, and EMC components. Focusing on miniaturization and surface mount requirements our vast array of quality electronic components includes LAN components, ferrite cores, amorphous cores, transformers, magnets, magnet applied products, piezoelectric products, delay lines, sensors, power supply, RF components & RF modules. TDK's S Parameters data library is available for ceramic capacitors, inductors and EMC components. TDK's authorized distributor network currently stocks many of these innovative, affordable electronic components for off-the-shelf delivery.
Polymer capacitor
The polymer capacitor from Murata has the design of low impedance, low ESR and a large scale. Moreover, there are no DC bias characteristics of capacitance....
Polymer capacitor
The polymer capacitor from Murata has the design of low impedance, low ESR and a large scale. Moreover, there are no DC bias characteristics of capacitance. Since there is also stability with the temperature characteristics, the capacitor excels in smoothness, the ripper absorption and the transient response performance.
This product is suitable for smoothing the input-output current of a variety of power supply circuits, as well as the backup use over CPU circumference load change. As a result, the number of parts is reduced. There may also be a reduction of substrate area.
This product is suitable for smoothing the input-output current of a variety of power supply circuits, as well as the backup use over CPU circumference load change. As a result, the number of parts is reduced. There may also be a reduction of substrate area.
Supercapacitor
In 2008, Murata began on focusing its R&D efforts on electrical double layer capacitators (edlc) in order to meet consumer demand for greater efficiency...
Supercapacitor
In 2008, Murata began on focusing its R&D efforts on electrical double layer capacitators (edlc) in order to meet consumer demand for greater efficiency and functionality in mobile devices. During this time, a decision was made to permit supercapacitator technology from leading edge firms such as CAP-XX CAP-XX, a fir, based in Australlia. Murants has developed improves design by working from this collaborative basis and the manufacturing of these high power (low ESR) EDLCs in a smaller and slimmer package. Research efforts continue in order to develop products that perform at an even higher standard.
Snubber capacitor / for GTO thyristor - 0.15 - 10 µF | STG-01A, STG-01BT, STG-01BN STG-02A STG-03A
There are numerous applications of this item, including high peak surge current, RMS current and surge voltage, with temperatures up to 105 degrees Celsius. The GTO and IGCT Snubber...
Snubber capacitor / for GTO thyristor - 0.15 - 10 µF | STG-01A, STG-01BT, STG-01BN STG-02A STG-03A
There are numerous applications of this item, including high peak surge current, RMS current and surge voltage, with temperatures up to 105 degrees Celsius. The GTO and IGCT Snubber protection is another important aspect, as are the suitability for motor control, static drive applications and several projects in the traction industry.
The electrical characteristics are various and include a capacitance range between 0.15 and 15uF, as well as a voltage range between 850 and 11,000Vdc and 450 and 1,400Vrms. The maximum current supported is up to 80A, while the capacitance tolerance is 5% or 10%. Finally, the high insulation resistance and the low inductance and ESR are two other important characteristics.
The electrical characteristics are various and include a capacitance range between 0.15 and 15uF, as well as a voltage range between 850 and 11,000Vdc and 450 and 1,400Vrms. The maximum current supported is up to 80A, while the capacitance tolerance is 5% or 10%. Finally, the high insulation resistance and the low inductance and ESR are two other important characteristics.
Snubber capacitor / for IGBT - 0.1 - 3 µF | SMKP2
There are several applications of this product including protection against voltage transients in low to medium current IGBT modules, as well as applications that are defined by dv/dt. At the same time, the large terminals...
Snubber capacitor / for IGBT - 0.1 - 3 µF | SMKP2
There are several applications of this product including protection against voltage transients in low to medium current IGBT modules, as well as applications that are defined by dv/dt. At the same time, the large terminals for electrical connections that can withstand higher capacitor current are also supported. As for the electrical characteristics, the capacitance range is between 0.1 and 3uF, while the tolerance is +/-5%J.
The voltage ranges between 1,000 and 2,000Vdc, as well as 500 to 650Vac, while the temperature supported is between -20 and 85 degrees Celsius, or -40 and 105 degrees Celsius, depending on the model. The very low inductance and ESR are also worth mentioning, as is the high insulation resistance. Finally, the extended double-sided metalized carrier film comes with an internal series connection, as well as a metalized film construction.
The voltage ranges between 1,000 and 2,000Vdc, as well as 500 to 650Vac, while the temperature supported is between -20 and 85 degrees Celsius, or -40 and 105 degrees Celsius, depending on the model. The very low inductance and ESR are also worth mentioning, as is the high insulation resistance. Finally, the extended double-sided metalized carrier film comes with an internal series connection, as well as a metalized film construction.
Metalized polypropylene film capacitor / axial leaded / high dv dt - 0.01 - 4.7 µF | STP-01QE STP-01Q
The axial lead polypropylene film capacitors in this product series can be used for several applications, including projects in which they absorb transient voltage and current...
Metalized polypropylene film capacitor / axial leaded / high dv dt - 0.01 - 4.7 µF | STP-01QE STP-01Q
The axial lead polypropylene film capacitors in this product series can be used for several applications, including projects in which they absorb transient voltage and current from Thyristor. Other projects include those where high dv/dt is encountered, as well as SMPS Snubber circuits, pulse current applications and MMC capacitor modules.
This item is useful for tank capacitors, high pulse current applications, benefiting from advanced electrical characteristics, such as a capacitance between 0.01 and 4.7uF. The voltage range is between 600 and 3,000Vdc, as well as 275 and 750Vac. Further details can be found on the manufacturer's website, www.filmcapacitor-st.com.
This item is useful for tank capacitors, high pulse current applications, benefiting from advanced electrical characteristics, such as a capacitance between 0.01 and 4.7uF. The voltage range is between 600 and 3,000Vdc, as well as 275 and 750Vac. Further details can be found on the manufacturer's website, www.filmcapacitor-st.com.
Snubber capacitor / for thyristor SCR - 0.1 - 1.5 µF | STP-01R, STP-01RB, STP-01RN, STP-01B
The products in the STP-01R series come with advanced technologies that make them usable with various applications. The series is designed for medium frequency ranges, as well as high ripple...
Snubber capacitor / for thyristor SCR - 0.1 - 1.5 µF | STP-01R, STP-01RB, STP-01RN, STP-01B
The products in the STP-01R series come with advanced technologies that make them usable with various applications. The series is designed for medium frequency ranges, as well as high ripple current and high peak current carrying capabilities. The inverter and converter, along with the harmonic filter and induction heat equipment can also benefit from the use of this item.
As for the electrical characteristics, the voltage range is between 500 and 1,100Vac, as well as 900 to 2,600Vdc. The temperature ranges from 85 to 105 degrees Celsius, while the plastic case is designed with epoxy resin, benefiting from dry construction. For more information, download the catalog from the manufacturer's website, www.filmcapacitor-st.com.
As for the electrical characteristics, the voltage range is between 500 and 1,100Vac, as well as 900 to 2,600Vdc. The temperature ranges from 85 to 105 degrees Celsius, while the plastic case is designed with epoxy resin, benefiting from dry construction. For more information, download the catalog from the manufacturer's website, www.filmcapacitor-st.com.
High pulse capacitor - 0.68 - 30uF | DCF-03 / DCF-04
The Pulse Current Capacitors / DC FIlter Capacitors are designed for various application that includes high ripple current and medium range frequency application, switch-mode power supply SMPS filtering circuitry, high...
High pulse capacitor - 0.68 - 30uF | DCF-03 / DCF-04
The Pulse Current Capacitors / DC FIlter Capacitors are designed for various application that includes high ripple current and medium range frequency application, switch-mode power supply SMPS filtering circuitry, high current DC / AC filtering, welding equipment and EDM machinery, high current tank circuit and high pulse current application. The device supports high temperature 105C requirement. DCF-03 / DCF-04 series is designed for application in 20Hz ~ 100kHz frequency range. The Multi-Mini Capacitors / MMC Capacitors module are used for axial lead requirement.
DCF-03QI / DCF-03QL / DCF-03QT series are designed to offer 1.0uF ~ 30uF capacitance range, 100 ~ 400Vdc / 70 ~ 250Vac rated voltage, up to 30A igh RMS current. They offer higher RMS current when compare with DCF-04 and higher frequency range when compare with DCL series
DCF-03QI / DCF-03QL / DCF-03QT series are designed to offer 1.0uF ~ 30uF capacitance range, 100 ~ 400Vdc / 70 ~ 250Vac rated voltage, up to 30A igh RMS current. They offer higher RMS current when compare with DCF-04 and higher frequency range when compare with DCL series