+7 (812) 645-08-06
Analog electronics boards and systems
select brand
Booster amplifier - CA/04/N
The CA.04/N by DJB instruments is a charge amplifier that features its dominant...
Booster amplifier - CA/04/N
The CA.04/N by DJB instruments is a charge amplifier that features its dominant power source which is an input voltage. For signal source impedance of the inpt voltage, it has a 1/w (Ct + Cc). For charge amplifier, it has a 1 / wCf transfer impedance which are compatible for mostopen circuit sytem.
Booster amplifier / sensor
The basis of the CA/100 is a thick film hybrid
microcircuit of similar complexity to our
CA/04 charge amplifier, housed in a 24 pin
hermetic dip. This is packaged, together with gain
controls...
microcircuit of similar complexity to our
CA/04 charge amplifier, housed in a 24 pin
hermetic dip. This is packaged, together with gain
controls...
Booster amplifier / sensor
The basis of the CA/100 is a thick film hybrid
microcircuit of similar complexity to our
CA/04 charge amplifier, housed in a 24 pin
hermetic dip. This is packaged, together with gain
controls and connectors, into a machined
aluminium block, the whole constituting an
extremely robust product capable of sustained
operation under conditions of high vibration,
mechanical shock, and temperature extremes.
The CA/100, by virtue of its 60dB, 1mV/pC
- 1V/pC, gain adjustment range, is an extremely
flexible interface for trials type applications,
allowing quite large compensatory on-line
adjustment for the signal level uncertainties that
may arise in this type of application. Installation
should allow access to gain controls !
microcircuit of similar complexity to our
CA/04 charge amplifier, housed in a 24 pin
hermetic dip. This is packaged, together with gain
controls and connectors, into a machined
aluminium block, the whole constituting an
extremely robust product capable of sustained
operation under conditions of high vibration,
mechanical shock, and temperature extremes.
The CA/100, by virtue of its 60dB, 1mV/pC
- 1V/pC, gain adjustment range, is an extremely
flexible interface for trials type applications,
allowing quite large compensatory on-line
adjustment for the signal level uncertainties that
may arise in this type of application. Installation
should allow access to gain controls !
Booster amplifier / sensor - 100 pC, 50 mV/pC | 4705A1
The 4705A1 series from Dytran is an in-line charge amplifier that is especially designed...
Booster amplifier / sensor - 100 pC, 50 mV/pC | 4705A1
The 4705A1 series from Dytran is an in-line charge amplifier that is especially designed with stainless steel to ensure highly durable performance when in use. The model has a range of 100 pC.
It features a BNC jack input connector and output connector. The model only weighs 33 grams and has dimensions of 0.50 x 3.15 inches.
It features a BNC jack input connector and output connector. The model only weighs 33 grams and has dimensions of 0.50 x 3.15 inches.
Booster amplifier / sensor - 5 000 pC, 1 mV/pC | 4705M5
The model 4705M5, which is manufactured by Dytran, is an in-line charger...
Booster amplifier / sensor - 5 000 pC, 1 mV/pC | 4705M5
The model 4705M5, which is manufactured by Dytran, is an in-line charger amplifier that utilizes a 10-32 jack as its input connector, and an BNC jack as its output connector. The unit is made of stainless steel, and it has a range of 5,000 pC with a sensitivity of 1 mV/pC.
Booster amplifier / sensor - 50 000 pC, 0.1 mV/pC | 4711A1
The 4711A1 series from Dytran is an in-line charge amplifier that is especially...
Booster amplifier / sensor - 50 000 pC, 0.1 mV/pC | 4711A1
The 4711A1 series from Dytran is an in-line charge amplifier that is especially designed with stainless steel to ensure highly durable performance when in use.
It features a 10-32 jack input connector and a BNC plug output connector. The model only weighs 33 grams and has dimensions of 0.50 x 2.53 inches.
It features a 10-32 jack input connector and a BNC plug output connector. The model only weighs 33 grams and has dimensions of 0.50 x 2.53 inches.
Booster amplifier / sensor - 500 pC, 10 mV/pC | 4751B2
The 4751B2 series from Dytran is an in-line charge amplifier that is especially designed...
Booster amplifier / sensor - 500 pC, 10 mV/pC | 4751B2
The 4751B2 series from Dytran is an in-line charge amplifier that is especially designed with stainless steel to ensure highly durable performance when in use. The model has a range of 500 pC.
It features a 10-32 jack input connector and output connector. The model only weighs 25 grams and has dimensions of 0.50 x 1.81 inches.
It features a 10-32 jack input connector and output connector. The model only weighs 25 grams and has dimensions of 0.50 x 1.81 inches.
Booster amplifier / online - 100 pC, 50 mV/pC | 4751B1T
The 4751B1T series from Dytran is an in-line charge amplifier that is especially designed...
Booster amplifier / online - 100 pC, 50 mV/pC | 4751B1T
The 4751B1T series from Dytran is an in-line charge amplifier that is especially designed with stainless steel to ensure highly durable performance when in use. The model has a range of 100 pC.
It features a 10-32 jack input connector and output connector. The model only weighs 25 grams and has dimensions of 0.50 x 1.81 inches.
It features a 10-32 jack input connector and output connector. The model only weighs 25 grams and has dimensions of 0.50 x 1.81 inches.
Booster amplifier / multichannel - 17 V, 25 mA | CA1800
The CA1800 is the appropriate solution to your rack mounted charge amplifier requirements. The CA1800 is manufactured as a solid, rack - mountable unit for utilization in engine test cell regulation rooms and other conditions where charge - mode accelerometers are utilized to evaluate the instrument...
Booster amplifier / multichannel - 17 V, 25 mA | CA1800
The CA1800 is the appropriate solution to your rack mounted charge amplifier requirements. The CA1800 is manufactured as a solid, rack - mountable unit for utilization in engine test cell regulation rooms and other conditions where charge - mode accelerometers are utilized to evaluate the instrument vibration.
The CA1800 has characteristics that are total differential inputs, with buffered acceleration and combined ( velocity) signal inputs. However, the outputs could be installed for differential and singled ended configurations and every channel could be installed ( at the MTI instruments factory) for any of the 3 variant gain settings to meet the accelerometer sensitivites.
The CA1800 has many unique characteristics :
1. Conversion of charge mode signals which are obtained by accelerometers.
2. A broard array of sensor sensitivites are facilitated.
3. The accelerometers are networked to the CA1800 utilizing industry modular 3 - pin MS - style connectors situated on the back of the unit.
4. It offers buffered output acceleration signals ( differential) utilizing connectors situated on the front panel.
The CA1800 has characteristics that are total differential inputs, with buffered acceleration and combined ( velocity) signal inputs. However, the outputs could be installed for differential and singled ended configurations and every channel could be installed ( at the MTI instruments factory) for any of the 3 variant gain settings to meet the accelerometer sensitivites.
The CA1800 has many unique characteristics :
1. Conversion of charge mode signals which are obtained by accelerometers.
2. A broard array of sensor sensitivites are facilitated.
3. The accelerometers are networked to the CA1800 utilizing industry modular 3 - pin MS - style connectors situated on the back of the unit.
4. It offers buffered output acceleration signals ( differential) utilizing connectors situated on the front panel.
Booster amplifier / 2-channel - max. 10 kHz | 41CA
The 41CA, which is manufactured by Mti Instruments, is a two-channel charge amplifier that...
Booster amplifier / 2-channel - max. 10 kHz | 41CA
The 41CA, which is manufactured by Mti Instruments, is a two-channel charge amplifier that is ideal for use in modifying accelerometer charge signals into voltage signals. The modified signals are then easily utilized by the PBS-4100 models of vibration analyzers. It has a volume of 10 x 18 x 10 cm with a frequency that ranges from 5-10,000 Hz.
Booster amplifier / multichannel - max. 10 kHz | 42CA
The 42CA four-channel charge amplifier can be applied for the conversion of accelerometer charge signals into voltage signals. The converted signals are then used by the PBS-4100...
Booster amplifier / multichannel - max. 10 kHz | 42CA
The 42CA four-channel charge amplifier can be applied for the conversion of accelerometer charge signals into voltage signals. The converted signals are then used by the PBS-4100 family of engine vibration analyzers. Four channels of amplification are included. The 42CA also incorporates six channels of pass through for additional signals (non-piezoelectric) along with a dual channel used for tachometer signals. This allows for the 42CA to be used as a single-point connection between the machine under-test and analysis system.
The tachometer channels in the 42CA are protected via an isolation circuitry which prevents cable faults from causing interference to the operation control systems.
The tachometer channels in the 42CA are protected via an isolation circuitry which prevents cable faults from causing interference to the operation control systems.