+7 (812) 645-08-06
Amplifier modules
select brand
Release amplifier / switch-mode - 8 V, 8 mA
This product is specifically designed to provide power in hazardous area's proximity sensors, handles reception of proportional current, changes input to digital output signals and then transfer switching...
Release amplifier / switch-mode - 8 V, 8 mA
This product is specifically designed to provide power in hazardous area's proximity sensors, handles reception of proportional current, changes input to digital output signals and then transfer switching signals to a controlling device like DCs/PLCs. The switch isolator contains three basic segments; transistor switch amplifier, output stage and power supply. What divides the input, output and power supply circuits is the galvanic isolation. The input stage is created in commensurate to DIN EN60947(NAMUR) making the residual voltage in normal operation of about 8VDC while short circuit current is about 8mA. Switch points are generally within 1.2-2.1 mA range. A number of Pepperl+Fuchs isolate give optional breakage in lead and monitoring short circuits in hazardous area presented with three outputs.
Release amplifier / switch-mode - 115 - 230 V | WE series
This revolutionary WE-System transformer isolated barrier from PEPPERL+FUCHS is unique device that is ideally used for transferring digital signals into hazardous...
Release amplifier / switch-mode - 115 - 230 V | WE series
This revolutionary WE-System transformer isolated barrier from PEPPERL+FUCHS is unique device that is ideally used for transferring digital signals into hazardous areas. This product can be used in industrial production with an outstanding performance. The Sensors per EN 60947-5-6 (NAMUR) or mechanical contacts have a remarkable capability that can be utilized as transmitters. The control circuit is monitored for lead breakage (LB) and features such as 1- / 2-channel, Control circuit EEx ia IIC, 230 V / 115 V AC supply voltage, Reversible mode of operation, Lead breakage (LB) monitoring and 1 relay output with 1 changeover contact per channel.
Release amplifier / switch-mode - max. 30 VDC, max. 30 mA | KCD2-SR-1.LB
This single-channel conditioner is a 24 V DC unit that...
Release amplifier / switch-mode - max. 30 VDC, max. 30 mA | KCD2-SR-1.LB
This single-channel conditioner is a 24 V DC unit that works with a relay contact output and dry contact input. This has a small body and uses a line fault detection system with a rated voltage at 30 V DC on its output.
Release amplifier / switch-mode
These switching amplifiers are useful for galvanically separated binary signal transmissions. Binary signals...
Release amplifier / switch-mode
These switching amplifiers are useful for galvanically separated binary signal transmissions. Binary signals from both mechanical contacts and sensor can be received by these devices. and they additionally can transmit binary signals to the safe area from the Ex-area. Mechanical contacts can be connected to these devices, these sensors in these amplifiers are certified in accordance with DIN EN 60947-5-6 or NAMUR standards.
Operational amplifier - BD5291G
These opamps feature a Common-Mode Rejection Ratio (CMRR) of 70dB (min), enabling high-accuracy amplification of ultra-small...
Operational amplifier - BD5291G
These opamps feature a Common-Mode Rejection Ratio (CMRR) of 70dB (min), enabling high-accuracy amplification of ultra-small signals. This makes them ideal for sensor amp applications for acceleration (shock), angular velocity, pressure, and more. In addition, unlike conventional input/output full-swing opamps that can operate only as low as 1.8V, the BD5291 series supports operation from 1.7V, providing a greater margin against supply voltage fluctuations in 1.8V systems.