+7 (812) 645-08-06
Extensometers
select brand
Mixed-flow extensometer - 0.4" - 4" | EAG
Model EAG also features our unique, ultra-low profile, axial Quick Attach System. This attachment system is designed to provide easy attachment while not unduly influencing the extensometer's output. The wire forms on our system are designed to transmit the attachment force axially through the extensometer. The system includes...
Mixed-flow extensometer - 0.4" - 4" | EAG
Model EAG also features our unique, ultra-low profile, axial Quick Attach System. This attachment system is designed to provide easy attachment while not unduly influencing the extensometer's output. The wire forms on our system are designed to transmit the attachment force axially through the extensometer. The system includes round and flat wire forms for both round and flat specimens. If you prefer to attach the extensometer with springs or rubber bands, spring mounts are provided with the unit. Model EAG-0200-0100-x - General Pourpose Axial Extensometer
All model EAG extensometers feature a full, 350 ohm, strain gauge bridge design and are compatible with most any brand test equipment. We can install the proper connector to interface to most any electronics including Instron. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card.
All standard models meet ASTM B-1 and ISO 9513, class 0,5 accuracy requirements. Each extensometer comes with an inspection certificate traceable to NIST, a spare parts kit, a spare set of tool-steel knife edges, and a quality, foam lined, plastic case.
All model EAG extensometers feature a full, 350 ohm, strain gauge bridge design and are compatible with most any brand test equipment. We can install the proper connector to interface to most any electronics including Instron. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card.
All standard models meet ASTM B-1 and ISO 9513, class 0,5 accuracy requirements. Each extensometer comes with an inspection certificate traceable to NIST, a spare parts kit, a spare set of tool-steel knife edges, and a quality, foam lined, plastic case.
Mixed-flow extensometer - 0.25" - 0.5" | EAGM
Our model EAGM miniature axial extensometer is designed around our new miniature cross-flexure module. This extensometer is designed for improved performance, ruggedness, and ease of use as well as a secure cable attachment system (cable failures are the leading cause of sensor failure).
Model EAM2 - Miniature Axial Extensometer
Small,...
Model EAM2 - Miniature Axial Extensometer
Small,...
Mixed-flow extensometer - 0.25" - 0.5" | EAGM
Our model EAGM miniature axial extensometer is designed around our new miniature cross-flexure module. This extensometer is designed for improved performance, ruggedness, and ease of use as well as a secure cable attachment system (cable failures are the leading cause of sensor failure).
Model EAM2 - Miniature Axial Extensometer
Small, light, and rugged, our ultra-light weight, miniature axial extensometers are typically used for testing small or delicate specimens. These units work equally well on thin sheet, wire, or biomedical materials. Our miniature axial extensometer is designed to fit in the tight space between grips when testing small specimens. Typical models measure only 0.6 inches [15 mm] tall, they weigh as little as 7 grams, and they have very low operating force to limit any influence on small samples. Model EAGM - Miniature General Purpose Axial Extensometer
All model EAGM extensometers feature a full, 350 ohm, strain gauge bridge design and are compatible with most any brand test equipment. We can install the proper connector to interface to most any electronics including Instron. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card.
Model EAM2 - Miniature Axial Extensometer
Small, light, and rugged, our ultra-light weight, miniature axial extensometers are typically used for testing small or delicate specimens. These units work equally well on thin sheet, wire, or biomedical materials. Our miniature axial extensometer is designed to fit in the tight space between grips when testing small specimens. Typical models measure only 0.6 inches [15 mm] tall, they weigh as little as 7 grams, and they have very low operating force to limit any influence on small samples. Model EAGM - Miniature General Purpose Axial Extensometer
All model EAGM extensometers feature a full, 350 ohm, strain gauge bridge design and are compatible with most any brand test equipment. We can install the proper connector to interface to most any electronics including Instron. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card.
Mixed-flow extensometer / miniature - 15 mm, 0.250" - 0.500" | EAM
For axial tensile, compression, and cyclic testing on small or delicate specimens.
Our model EAM miniature axial extensometer is designed around our new miniature cross-flexure module. This innovative design provides improved performance and ruggedness over existing units as well as improved cable attachment (a leading cause of sensor failure).
Small, light, and rugged, our ultra-light...
Our model EAM miniature axial extensometer is designed around our new miniature cross-flexure module. This innovative design provides improved performance and ruggedness over existing units as well as improved cable attachment (a leading cause of sensor failure).
Small, light, and rugged, our ultra-light...
Mixed-flow extensometer / miniature - 15 mm, 0.250" - 0.500" | EAM
For axial tensile, compression, and cyclic testing on small or delicate specimens.
Our model EAM miniature axial extensometer is designed around our new miniature cross-flexure module. This innovative design provides improved performance and ruggedness over existing units as well as improved cable attachment (a leading cause of sensor failure).
Small, light, and rugged, our ultra-light weight, miniature axial extensometers are typically used for testing small or delicate specimens. These units work equally well on thin sheet, wire, or biomedical materials. Our miniature axial extensometer is designed to fit in the tight space between grips when testing small specimens. Typical models measure only 0.6 inches [15 mm] tall, they weigh as little as 7 grams, and they have very low operating force to limit any influence on small samples. Model EAM - Miniature Axial Extensometer
All model EAM extensometers feature a full, 350 ohm, strain gauge bridge design and are compatible with most any brand test equipment. We can install the proper connector to interface to most any electronics including Instron. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card.
All standard models meet ASTM B-1 and ISO 9513, class 0,5 accuracy requirements. Each extensometer comes with an inspection certificate traceable to NIST, spare parts kit, spare set of tool-steel knife edges, and a quality, foam lined, plastic storage case.
Our model EAM miniature axial extensometer is designed around our new miniature cross-flexure module. This innovative design provides improved performance and ruggedness over existing units as well as improved cable attachment (a leading cause of sensor failure).
Small, light, and rugged, our ultra-light weight, miniature axial extensometers are typically used for testing small or delicate specimens. These units work equally well on thin sheet, wire, or biomedical materials. Our miniature axial extensometer is designed to fit in the tight space between grips when testing small specimens. Typical models measure only 0.6 inches [15 mm] tall, they weigh as little as 7 grams, and they have very low operating force to limit any influence on small samples. Model EAM - Miniature Axial Extensometer
All model EAM extensometers feature a full, 350 ohm, strain gauge bridge design and are compatible with most any brand test equipment. We can install the proper connector to interface to most any electronics including Instron. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card.
All standard models meet ASTM B-1 and ISO 9513, class 0,5 accuracy requirements. Each extensometer comes with an inspection certificate traceable to NIST, spare parts kit, spare set of tool-steel knife edges, and a quality, foam lined, plastic storage case.
Baking oven extensometer - 0.500" - 2000" | EFSS
For use with furnace and induction heating systems, these extensometers feature our innovative self-supported attachment system.
Model EFSS furnace extensometer is designed around our new, self-supported mounting system. This innovative design sends the mounting force axially down the ceramic rods eliminating the bending moment, measurement errors, and zero shift found in the competition's...
Model EFSS furnace extensometer is designed around our new, self-supported mounting system. This innovative design sends the mounting force axially down the ceramic rods eliminating the bending moment, measurement errors, and zero shift found in the competition's...
Baking oven extensometer - 0.500" - 2000" | EFSS
For use with furnace and induction heating systems, these extensometers feature our innovative self-supported attachment system.
Model EFSS furnace extensometer is designed around our new, self-supported mounting system. This innovative design sends the mounting force axially down the ceramic rods eliminating the bending moment, measurement errors, and zero shift found in the competition's...
Model EFSS furnace extensometer is designed around our new, self-supported mounting system. This innovative design sends the mounting force axially down the ceramic rods eliminating the bending moment, measurement errors, and zero shift found in the competition's...
Extensometer for rock, concrete, and asphalt - 0.500 - 1000" | EAA
For axial tensile, compression, and cyclic testing where an averaged output is desired.
Our model EAA - averaging axial extensometer is built around our new, monocoque module design. This innovative design provides a very stiff module body which results in improved performance and ruggedness over existing units. To keep...
Our model EAA - averaging axial extensometer is built around our new, monocoque module design. This innovative design provides a very stiff module body which results in improved performance and ruggedness over existing units. To keep...
Extensometer for rock, concrete, and asphalt - 0.500 - 1000" | EAA
For axial tensile, compression, and cyclic testing where an averaged output is desired.
Our model EAA - averaging axial extensometer is built around our new, monocoque module design. This innovative design provides a very stiff module body which results in improved performance and ruggedness over existing units. To keep our extensometers as light as possible, even the module cover is used as an integral stressed member. As an added bonus, our design in more compact and will more easily fit into the tight space of your environmental chamber. It is also lighter to reduce the influence of the extensometer's weight on the specimen under test.
All model EAA extensometers feature a full, strain gauge bridge design and are compatible with most any brand test equipment. This model can be configured for a single, averaged axial strain signal or for two independent axial strain signals. We can install the proper connectors to interface to most any electronics including Instron, ADMET, and MTS. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card. Model EAA - Averaging Axial Extensometer
Our model EAA - averaging axial extensometer is built around our new, monocoque module design. This innovative design provides a very stiff module body which results in improved performance and ruggedness over existing units. To keep our extensometers as light as possible, even the module cover is used as an integral stressed member. As an added bonus, our design in more compact and will more easily fit into the tight space of your environmental chamber. It is also lighter to reduce the influence of the extensometer's weight on the specimen under test.
All model EAA extensometers feature a full, strain gauge bridge design and are compatible with most any brand test equipment. This model can be configured for a single, averaged axial strain signal or for two independent axial strain signals. We can install the proper connectors to interface to most any electronics including Instron, ADMET, and MTS. If your test frame or set-up does not have the required strain signal conditioner, we can supply stand-alone electronics calibrated with your extensometer. This will allow you to use a chart recorder, digital display, or data acquisition card. Model EAA - Averaging Axial Extensometer