+7 (812) 645-08-06
Weigh modules
select brand
Weigh module - 0.5 - 10 klb | EconoMount
FEATURES
• Capacity range: 500, 1.25K, 2.5K, 5K, and 10K lb
(227, 567, 1.13K, 2.27K,...
• Capacity range: 500, 1.25K, 2.5K, 5K, and 10K lb
(227, 567, 1.13K, 2.27K,...
Weigh module - 0.5 - 10 klb | EconoMount
FEATURES
• Capacity range: 500, 1.25K, 2.5K, 5K, and 10K lb
(227, 567, 1.13K, 2.27K,...
• Capacity range: 500, 1.25K, 2.5K, 5K, and 10K lb
(227, 567, 1.13K, 2.27K,...
Stainless steel weigh module - max. 1.1 klb | EZ-Mount
EZ-Mount Weigh Modules are designed for maximum accuracy coupled with a high degree of resistance to the adverse effects of overload and sideload forces. Each module consists of a bending beam transducer packaged in a rugged stainless steel
mounting system. Specifically...
mounting system. Specifically...
Stainless steel weigh module - max. 1.1 klb | EZ-Mount
EZ-Mount Weigh Modules are designed for maximum accuracy coupled with a high degree of resistance to the adverse effects of overload and sideload forces. Each module consists of a bending beam transducer packaged in a rugged stainless steel
mounting system. Specifically designed for use on low capacity process vessels, modules meet IP68 and NEMA 6 immersion requirements and mechanically resist high
overload and sideload forces. Built in load adaption technology automatically compensates for vessel thermal expansion and contraction. A substantial protection plate, positioned above the cable entry gland, prevents damage from plant debris and traffic. Simplified bolting patterns expedite both retrofit and new vessel installations.
EZ-Mount modules can be fully installed without the load beam, reducing any risk of
load cell failure. After installation, simply slide the beam into place and adjust the
overload safety stops. In frequent washdown areas, the ground strap may be removed (after installation) without affecting module performance.
mounting system. Specifically designed for use on low capacity process vessels, modules meet IP68 and NEMA 6 immersion requirements and mechanically resist high
overload and sideload forces. Built in load adaption technology automatically compensates for vessel thermal expansion and contraction. A substantial protection plate, positioned above the cable entry gland, prevents damage from plant debris and traffic. Simplified bolting patterns expedite both retrofit and new vessel installations.
EZ-Mount modules can be fully installed without the load beam, reducing any risk of
load cell failure. After installation, simply slide the beam into place and adjust the
overload safety stops. In frequent washdown areas, the ground strap may be removed (after installation) without affecting module performance.
Weigh module for hazardous areas - 200 - 300 klb | KDH-1B
FEATURES
• Capacity range: 200K and 300K lb (90.7K and 136K kg)
• Low profile...
• Capacity range: 200K and 300K lb (90.7K and 136K kg)
• Low profile...
Weigh module for hazardous areas - 200 - 300 klb | KDH-1B
FEATURES
• Capacity range: 200K and 300K lb (90.7K and 136K kg)
• Low profile...
• Capacity range: 200K and 300K lb (90.7K and 136K kg)
• Low profile...
Stainless steel weigh module - max. 112 klb | KDH-3
FEATURES
All Stainless Steel
22,500, 45,000, and 112,500...
All Stainless Steel
22,500, 45,000, and 112,500...
Stainless steel weigh module - max. 112 klb | KDH-3
FEATURES
All Stainless Steel
22,500, 45,000, and 112,500 pound capacities
Seismic and wind resistant self-checking design
Resistant to sideloads
Accommodates process dynamics and thermal expansion
Fault protected transducer excitation
All Stainless Steel
22,500, 45,000, and 112,500 pound capacities
Seismic and wind resistant self-checking design
Resistant to sideloads
Accommodates process dynamics and thermal expansion
Fault protected transducer excitation
Weigh module for tanks, reactors, silos - 11 000 - 66 000 lb | 220
The 220 tank mount is a heavy duty, highly accurate compression load cell.
It features an all stainless steel construction and is available...
It features an all stainless steel construction and is available...
Weigh module for tanks, reactors, silos - 11 000 - 66 000 lb | 220
The 220 tank mount is a heavy duty, highly accurate compression load cell.
It features an all stainless steel construction and is available...
It features an all stainless steel construction and is available...
Weigh module for tanks, reactors, silos - 1 500 - 80 000 lb | BSS
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The BSS is a 350-ohm, full bridge,...
The BSS is a 350-ohm, full bridge,...
Weigh module for tanks, reactors, silos - 1 500 - 80 000 lb | BSS
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The BSS is a 350-ohm, full bridge, single-ended, cantilever type stainless steel Weigh Bar.
Fully washdown WeighBar, ideal for food and chemical weighing applications
The BSS is a 350-ohm, full bridge, single-ended, cantilever type stainless steel Weigh Bar. Each Weigh Bar is mounted in a wash-through, compression, stainless steel stand.
The BSS features a self-leveling chain link design, making it ideal for hoppers and silos, where vibration and off-center loading can be a problem.
The chain link assemblies are also fully washdown protected, for food and chemical applications.
The BSS is a 350-ohm, full bridge, single-ended, cantilever type stainless steel Weigh Bar.
Fully washdown WeighBar, ideal for food and chemical weighing applications
The BSS is a 350-ohm, full bridge, single-ended, cantilever type stainless steel Weigh Bar. Each Weigh Bar is mounted in a wash-through, compression, stainless steel stand.
The BSS features a self-leveling chain link design, making it ideal for hoppers and silos, where vibration and off-center loading can be a problem.
The chain link assemblies are also fully washdown protected, for food and chemical applications.
Weigh module for tanks, reactors, silos - max. 80 000 lb | BWB
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The BWB batching Weigh Bar is a 350-ohm,...
The BWB batching Weigh Bar is a 350-ohm,...
Weigh module for tanks, reactors, silos - max. 80 000 lb | BWB
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The BWB batching Weigh Bar is a 350-ohm, full bridge singled ended cantilever-type Weigh Bar.
Fully washdown WeighBar, ideal for food and chemical weighing applications
The BWB batching weighbar features a self-leveling chain link design, making it ideal for hoppers and silos, where vibration and off-center loading can be a problem.
The chain link assemblies are also fully washdown protected, for food and chemical applications.
Corrosion protection, mild steel weighbar
The BWB is made of mild steel with epoxy paint for corrosion protection. It is sold in kits with capacities from 1500 lbs to 80,000 lbs.
The BWB batching Weigh Bar is a 350-ohm, full bridge singled ended cantilever-type Weigh Bar.
Fully washdown WeighBar, ideal for food and chemical weighing applications
The BWB batching weighbar features a self-leveling chain link design, making it ideal for hoppers and silos, where vibration and off-center loading can be a problem.
The chain link assemblies are also fully washdown protected, for food and chemical applications.
Corrosion protection, mild steel weighbar
The BWB is made of mild steel with epoxy paint for corrosion protection. It is sold in kits with capacities from 1500 lbs to 80,000 lbs.
Weigh module for tanks, reactors, silos - 750 - 400 000 lb | DEBWB
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The DEBWB is a 350 ohm, full bridge, double ended batching Weigh...
The DEBWB is a 350 ohm, full bridge, double ended batching Weigh...
Weigh module for tanks, reactors, silos - 750 - 400 000 lb | DEBWB
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The DEBWB is a 350 ohm, full bridge, double ended batching Weigh Bar mounted in a bracket assembly.
Corrosion protection, mild steel weighbar available in a range of capacities
The DEBWB made of mild steel finished with epoxy paint for corrosion protection.
They are available in kits with capacities from 750 lbs to 400,000 lbs. It is not approved for trade by weight and comes with a 0.25% accuracy rating.
Ideal for food and chemical weighing applications
The DEBWB features a self-leveling chain link design, making it ideal for hoppers and silos, where vibration and off-center loading can be a problem.
The chain link assemblies are also fully washdown protected, for food and chemical applications.
The DEBWB is a 350 ohm, full bridge, double ended batching Weigh Bar mounted in a bracket assembly.
Corrosion protection, mild steel weighbar available in a range of capacities
The DEBWB made of mild steel finished with epoxy paint for corrosion protection.
They are available in kits with capacities from 750 lbs to 400,000 lbs. It is not approved for trade by weight and comes with a 0.25% accuracy rating.
Ideal for food and chemical weighing applications
The DEBWB features a self-leveling chain link design, making it ideal for hoppers and silos, where vibration and off-center loading can be a problem.
The chain link assemblies are also fully washdown protected, for food and chemical applications.
Weigh module for tanks, reactors, silos - 5 000 - 20 000 lb | HSWB
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The HSWB is a 350-ohm, full bridge,...
The HSWB is a 350-ohm, full bridge,...
Weigh module for tanks, reactors, silos - 5 000 - 20 000 lb | HSWB
Batching Weigh Bars from Avery Weigh-Tronix convert your bin, tank or hopper into accurate, dependable scales with minimal interruption to your operations.
The HSWB is a 350-ohm, full bridge, singled ended Weigh Bar for use in applications where the hopper is suspended.
Built for suspended-hopper weighing
The HSWB is a 350-ohm, full bridge, singled ended Weigh Bar for use in applications where the hopper is suspended.
It is mounted in a bracket assembly and covered, with chain links connected to the Weigh Bar.
Legal for trade, high capacity weighbar
The HSWB Weigh Bar is trade approved, for applications where product is sold by weight and is accurate to 5,000 divisions.
The HSWB is available in capacities from 5,000 lbs to 20,000 lbs.
The HSWB is a 350-ohm, full bridge, singled ended Weigh Bar for use in applications where the hopper is suspended.
Built for suspended-hopper weighing
The HSWB is a 350-ohm, full bridge, singled ended Weigh Bar for use in applications where the hopper is suspended.
It is mounted in a bracket assembly and covered, with chain links connected to the Weigh Bar.
Legal for trade, high capacity weighbar
The HSWB Weigh Bar is trade approved, for applications where product is sold by weight and is accurate to 5,000 divisions.
The HSWB is available in capacities from 5,000 lbs to 20,000 lbs.
Weigh module
Mounting kits for DSBi double shear beam load cells: Accessories suitable for weighing hoppers, tanks, platforms, etc. etc. The special articulation...
Weigh module
Mounting kits for DSBi double shear beam load cells: Accessories suitable for weighing hoppers, tanks, platforms, etc. etc. The special articulation guarantees an excellent measuring accuracy also in the presence of dilatations and/or bending of the weighing structure.
MAIN FEATURES
EXECUTION IN AISI304 STAINLESS STEEL
GREAT RESISTANCE TO LATERAL FORCES
BOLTS FOR MAINTAINING THE RAISED POSITION, FOR EASY INSTALLMENT AND/OR SUBSTITUTION OF THE LOAD CELL
SELF-CENTERING CONNECTION SEGMENT BETWEEN LOWER AND UPPER PLATES.
MAIN FEATURES
EXECUTION IN AISI304 STAINLESS STEEL
GREAT RESISTANCE TO LATERAL FORCES
BOLTS FOR MAINTAINING THE RAISED POSITION, FOR EASY INSTALLMENT AND/OR SUBSTITUTION OF THE LOAD CELL
SELF-CENTERING CONNECTION SEGMENT BETWEEN LOWER AND UPPER PLATES.
Stainless steel weigh module - max. 300 kg | CW series
Stainless steel weighing modules suitable both for weighing hanging quarters and for weighing on a reclining platform. Standard version is with approved load cell.
...
Stainless steel weigh module - max. 300 kg | CW series
Stainless steel weighing modules suitable both for weighing hanging quarters and for weighing on a reclining platform. Standard version is with approved load cell.
MAIN FEATURES
Functions with a stainless steel, single point, approved load cell made according to OIML R60 standards, with protection against dust and moisture according to IP66 standards (350 Ohm input resistance).
Bearing structure which may be fixed to the wall fitted with a quarter-weighing hook.
Folding stainless steel loading surface, fitted with a fall-prevention safety piston.
Up to 15 Vdc power supply.
Shielded 3m long 6-pin cable with connectors for connection to the weight indicator.
MAIN FEATURES
Functions with a stainless steel, single point, approved load cell made according to OIML R60 standards, with protection against dust and moisture according to IP66 standards (350 Ohm input resistance).
Bearing structure which may be fixed to the wall fitted with a quarter-weighing hook.
Folding stainless steel loading surface, fitted with a fall-prevention safety piston.
Up to 15 Vdc power supply.
Shielded 3m long 6-pin cable with connectors for connection to the weight indicator.