+7 (812) 645-08-06
Tension / compression load cells
select brand
Hydraulic load cell - 329 Erichsen Wuppertal
The model 329 from Chatillon is a compact load cell that is specifically solid...
Hydraulic load cell - 329 Erichsen Wuppertal
The model 329 from Chatillon is a compact load cell that is specifically solid in height and this makes highly-flexible. This specific device has been developed primarily for occasional force checks, including for setting or service work. The usable measurement range of the device is from 250 N up to 630 kN.
Hydraulic load cell - 338 Erichsen Wuppertal
Hydraulic Force Gauge Load Cell Model 338 has measurement capacity of 400N - 63kN and...
Hydraulic load cell - 338 Erichsen Wuppertal
Hydraulic Force Gauge Load Cell Model 338 has measurement capacity of 400N - 63kN and designed for occasional force checking and for permanent installation. A robust construction resists rough operating conditions on machines and installations. The standard instrument is fitted with a 63mm diameter gauge with max. riding pointer.
Hydraulic load cell - 332 Erichsen Wuppertal
The model 332 from Chatillon is designed with high-quality load cell range that is contacted...
Hydraulic load cell - 332 Erichsen Wuppertal
The model 332 from Chatillon is designed with high-quality load cell range that is contacted for permanent fitting into apparatus and installations of any kinds. This device is equipped with an accurate pressure range gauge 100 mm nominal diameter with zero point correction. It has a high scale of accessories that is accessible to fit most applications.
Hydraulic load cell - 343 Erichsen Wuppertal
This product is manufactured by Chatillon company. The Model 343 series is used in all applications where it is necessary to carry out a wave through a measuring body. It is particularly suitable...
Hydraulic load cell - 343 Erichsen Wuppertal
This product is manufactured by Chatillon company. The Model 343 series is used in all applications where it is necessary to carry out a wave through a measuring body. It is particularly suitable for continuous measurement of axial forces, as occurring at ground anchors, as well as for monitoring of storage forces (eg, lathes, drill presses and extruders); The force measuring instruments work on the principle of hydraulic power transmission. The force acting on the piston is converted directly into a hydraulic pressure acts on a connected display instrument, which is scaled to the desired measurement (N or kg). The load must be plane-parallel, concentric, and torque-free, a possible "unbalanced load" can be compensated by joint stock (option).
Hydraulic load cell - 339 H Erichsen Wuppertal
The force measuring instruments work on the principle of hydraulic power transmission. The force acting on the piston is converted...
Hydraulic load cell - 339 H Erichsen Wuppertal
The force measuring instruments work on the principle of hydraulic power transmission. The force acting on the piston is converted directly into a hydraulic pressure acts on a connected display instrument, which is scaled to the desired measurement (N or kg). Hydraulic force gauges are mainly designed for static and quasi-static operation, that is, that the time of the increase in force should not be less than 1 second (with respect to Fn), since fast power change can destroy the meter.
Precision load cell - 0.5 - 20 N | MBB-01 series
The MBB-01 series engineered by Magtrol, is a precision force transducer intended for the measurement...
Precision load cell - 0.5 - 20 N | MBB-01 series
The MBB-01 series engineered by Magtrol, is a precision force transducer intended for the measurement of small positive and negative loads. It is built with a complete aluminum construction to provide users a high measurement stability, and to offer a high capacity overload protection. In addition, this device enables adaptation to numerous small and precision functions.
Precision load cell - 0.01 - 5 N | MBB-02 series
The MBB-02 series is a precision force transducer manufactured by MAGTROL. This device can measure materials with very...
Precision load cell - 0.01 - 5 N | MBB-02 series
The MBB-02 series is a precision force transducer manufactured by MAGTROL. This device can measure materials with very small loads. Its aluminum construction makes its measurement more stable. In addition, it is protected against high capacity overloads. It can be applied with sufficient force in two different positions to enhance its flexibility.
This series can be used in different small and accurate applications and also lasting dynamic measurements.
This series can be used in different small and accurate applications and also lasting dynamic measurements.
Compression load cell / tension - 20 - 100 N | DB-11 series
The DB-11 Series, engineered by Magtrol, is a tension and compression load cell intended for the measurement of both static...
Compression load cell / tension - 20 - 100 N | DB-11 series
The DB-11 Series, engineered by Magtrol, is a tension and compression load cell intended for the measurement of both static and dynamic forces. It makes use of a strain gauge technology and a deformation sensing element that provides an electrical signal which is proportional to the force being measured. Moreover, it is constructed with aluminum components that highlights an IP67 protection degree.
In addition, this device is best applied on most low-range force measurements.
In addition, this device is best applied on most low-range force measurements.
Radial load cell / multi-axis - 50 - 1 200 N | DB series
The 1816 Series, manufactured by Magtrol®, is a load force weight transducers for radial forces measurement in...
Radial load cell / multi-axis - 50 - 1 200 N | DB series
The 1816 Series, manufactured by Magtrol®, is a load force weight transducers for radial forces measurement in...
Load cell - 300 - 400 kN | SK-01 series
The Magtrol SK-01 Force Transducer is designed to work on strain gauge technology for ideal application in control of ropes, brake clamps and similar devices....
Load cell - 300 - 400 kN | SK-01 series
The Magtrol SK-01 Force Transducer is designed to work on strain gauge technology for ideal application in control of ropes, brake clamps and similar devices. The clamping force is measured on the longitudinal axis of the transducer independent of the clamp. SK-01 is available in two different ranges. The first version is for ropes with diameter 20 to 39 mm for forces up to 300 kN and the second for rope of a diameter 40 to 60 mm for forces up to 400 kN. SK-01 can be connected with SKG-01 digital amplifier to ideally measure the clamping force on lifts, ski-lifts and similar applications.
Tension load cell / compression / miniature - Junior S-Beam
The Junior S-Beam model assembled by Mecmesin, is a miniature tension/compression load cell intended for tension and compression applications....
Tension load cell / compression / miniature - Junior S-Beam
The Junior S-Beam model assembled by Mecmesin, is a miniature tension/compression load cell intended for tension and compression applications....
Compression load cell / tension / S-beam - S-Beam
Mecmesin's S-Beam Loadcell is a flexible solution for general force regulation applications.
This...
This...
Compression load cell / tension / S-beam - S-Beam
Mecmesin's S-Beam Loadcell is a flexible solution for general force regulation applications.
This is suitable for areas where space is not limited. The unit features a peak hold of maximum reading at fast rate of 5000 Hz, when used with AFTI display and advanced force gauge.
The unit is also applicable for use in tension and compression testing.
This is suitable for areas where space is not limited. The unit features a peak hold of maximum reading at fast rate of 5000 Hz, when used with AFTI display and advanced force gauge.
The unit is also applicable for use in tension and compression testing.