+7 (812) 645-08-06
Turbine flow meters
select brand
Turbine flow meter / for liquids - 5 - 90 l/min | TR 90 series
Lutz flow meter TR 90 is ideal for measurement of neutral liquids, acids, alkalis and many other non-flammable fluids. Examples include glycol, ferric (III) chloride, hydrochloric...
Turbine flow meter / for liquids - 5 - 90 l/min | TR 90 series
Lutz flow meter TR 90 is ideal for measurement of neutral liquids, acids, alkalis and many other non-flammable fluids. Examples include glycol, ferric (III) chloride, hydrochloric acid, phosphoric acid, chlorine solution, nitric acid, sulfuric acid, etc. It works well with thin-bodied liquids.
TR 90 operates on a turbine wheel principle. The meter displays both partial and total volumes. It is ideal for flow rates between 5 l/min to 90 l/min. It supports mobile installation on a drum pump or with a nozzle connection.
TR 90 is available in two types. TR 90 PP is for neutral and corrosive fluids, and TR 90 PVDF is for highly aggressive fluids.
TR 90 operates on a turbine wheel principle. The meter displays both partial and total volumes. It is ideal for flow rates between 5 l/min to 90 l/min. It supports mobile installation on a drum pump or with a nozzle connection.
TR 90 is available in two types. TR 90 PP is for neutral and corrosive fluids, and TR 90 PVDF is for highly aggressive fluids.
Impeller flow meter - max. 200 psi | RFA Types
The RFA is an electronic flow sensor manufactured by Gems™. It has an integrated flow...
Impeller flow meter - max. 200 psi | RFA Types
The RFA is an electronic flow sensor manufactured by Gems™. It has an integrated flow rate indication with a built-in visual confirmation. Additionally, it uses a 0-10 VDC Analog Signal. It can be used for a wide variety of applications including water purification and dispensing systems, chemical metering equipment, and water injection systems.
Turbine flow rate sensor - max. 172.4 bar | FT-110 Series
Gems™ FT-110 Series TurboFlow® Turbine Flow Sensors are low-cost products with high-accuracy ±3%...
Turbine flow rate sensor - max. 172.4 bar | FT-110 Series
Gems™ FT-110 Series TurboFlow® Turbine Flow Sensors are low-cost products with high-accuracy ±3%...
Turbine flow meter / insertion - max. 2 000 psi, 75 - 2 000 mm | RIM10 series
The RIM10 rotor insertion flow meter is highly recommended for steam, gas and liquid stream that is directly installed to operational pipelines. To continue, through...
Turbine flow meter / insertion - max. 2 000 psi, 75 - 2 000 mm | RIM10 series
The RIM10 rotor insertion flow meter is highly recommended for steam, gas and liquid stream that is directly installed to operational pipelines. To continue, through the use of standard hot-tapping techniques, this top of the line device allows installations to operating pipelines without the need of interrupting the process. Furthermore, the RIM10 rotor insertion flow meter promotes outstanding energy conservation because it provides accurate measurements. Moreover, the device may be utilized even in installations with full flow operation. The product remarkably lets the consumer saves a lot of money against the purchase of full-bore flow meters.