+7 (812) 645-08-06
Pressure switches, vacuum switches
select brand
Digital pressure switch / air / compact - PS1 series
The air regulator, PS1 chain, digital pressure switch is obtainable for constructive pressure...
Digital pressure switch / air / compact - PS1 series
The air regulator, PS1 chain, digital pressure switch is obtainable for constructive pressure and for vacuum. PS1 is very condensed and frivolous. Measurements are 30l X 13W X 10H mm for normal category devoid of connection part. A two-wire switch is appropriate to either Negative-Positive-Negative or Positive-Negative-Positive productivity.
Pressure switch with digital display / high-precision - ISE30 series
The Series ISE30 high precision digital pressure switch (for positive pressure) feature a...
Pressure switch with digital display / high-precision - ISE30 series
The Series ISE30 high precision digital pressure switch (for positive pressure) feature a two color digital display with four different display settings that allows choosing of settings appropriate for your application requirements. Displays may be calibrated, and the controls are more user friendly. Plug type connectors simplify installation and maintenance.
Inflatable boat pressure switch - IS3000 series
SMC created IS3000, a form of switch that closes an electrical contact...
Inflatable boat pressure switch - IS3000 series
SMC created IS3000, a form of switch that closes an electrical contact when a certain set pressure has been reached on its input. It can be used for mall electrical loads of 10mA and has a high frequency operation of 1 cycle/sec. IS3000 calibration ranges from 0.1 to 0.7 MPa.
Panel-mount pressure vacuum switch / DIN rail / digital - ZSE10 series
SMC new ZSE10(F)/ISE10 pressure switches are ideal for requirements with machine space constraints. The switches, with only 9.8 mm width, have been developed specifically to result in less space utilization. The switches require approximately 50% less space...
Panel-mount pressure vacuum switch / DIN rail / digital - ZSE10 series
SMC new ZSE10(F)/ISE10 pressure switches are ideal for requirements with machine space constraints. The switches, with only 9.8 mm width, have been developed specifically to result in less space utilization. The switches require approximately 50% less space for mounting when compared to the popular ZSE30A/ISE30A models, yet deliver the same level of performance.
A key feature of ZSE10(F)/ISE10 is a copy function which allows simultaneous copying of master sensor settings on up to 10 slave sensors. This results in huge savings in setting time and minimal human setting errors. The switch has a password-setting function which protects the settings from any unnecessary tampering. Also, an enhanced multi-angle direction visibility facilitates easy monitoring of vacuum suction and pressure.
ZSE10(F)/ISE10 are suitable for a variety of switch applications with restricted panel space. The mounting options available are direct, panel and DIN rail with piping directions as side or rear.
A key feature of ZSE10(F)/ISE10 is a copy function which allows simultaneous copying of master sensor settings on up to 10 slave sensors. This results in huge savings in setting time and minimal human setting errors. The switch has a password-setting function which protects the settings from any unnecessary tampering. Also, an enhanced multi-angle direction visibility facilitates easy monitoring of vacuum suction and pressure.
ZSE10(F)/ISE10 are suitable for a variety of switch applications with restricted panel space. The mounting options available are direct, panel and DIN rail with piping directions as side or rear.
Compact vacuum switch / for inflatable boats - ZSE1 series
The ZSE1 series is a highly robust vacuum pressure switch that can be purchased in an independent...
Compact vacuum switch / for inflatable boats - ZSE1 series
The ZSE1 series is a highly robust vacuum pressure switch that can be purchased in an independent setting with hysteresis adjustment, a double setting/ double output type or an analog output type with hysteresis adjustment. This tool is exceptionally featherweight and has an optional plug-in connector guaranteeing effortlessly straightforward wiring.
Pressure switch with digital display - ISE30A series
After the successful launch and performance of ZSE/ISE 30 Series, the latest Series of ZSE30 A(F) / ISE30A is the new, sophisticated precise digital pressure switches that come with twin-color display and high performing...
Pressure switch with digital display - ISE30A series
After the successful launch and performance of ZSE/ISE 30 Series, the latest Series of ZSE30 A(F) / ISE30A is the new, sophisticated precise digital pressure switches that come with twin-color display and high performing features.
The sensors of this equipment are equipped with PNP or NPN dual open collector outputs. They also have additional analogue output along with the sensors of improved copy function. These also allows for simultaneous set up of as much as 10 subordinate monitors.
There are mere three simple steps to be followed for the set up. There are also password setting function with probable errors, and elongated setting time. Even the superfluous manipulations are to be carefully avoided. Some of the more features include CE, UL/CSA and RoHS compliant ZSE30 A(F) / ISE30A with a power saving option.
The sensors of this equipment are equipped with PNP or NPN dual open collector outputs. They also have additional analogue output along with the sensors of improved copy function. These also allows for simultaneous set up of as much as 10 subordinate monitors.
There are mere three simple steps to be followed for the set up. There are also password setting function with probable errors, and elongated setting time. Even the superfluous manipulations are to be carefully avoided. Some of the more features include CE, UL/CSA and RoHS compliant ZSE30 A(F) / ISE30A with a power saving option.
Compact pressure vacuum switch - ZSE1 series
SMC ZSE1 series is a lightweight and compact vacuum pressure switch. It is available...
Compact pressure vacuum switch - ZSE1 series
SMC ZSE1 series is a lightweight and compact vacuum pressure switch. It is available in a single setting which allows adjusting hysteresis, a double setting/ double output type or an analog output type allowing to adjust hysteresis.
Wiring is made easier by the ZSE1 with an optional plug-in connector.
Wiring is made easier by the ZSE1 with an optional plug-in connector.
Compact pressure vacuum switch - ZSE2 series
The ZSE2 series vacuum pressure switch represents a very tightly packed...
Compact pressure vacuum switch - ZSE2 series
The ZSE2 series vacuum pressure switch represents a very tightly packed and simple solution that is designed for easy installation in ZX or ZR vacuum systems. It provides a very short response time of only 10mS with a very simple wiring as it is equipped with a plug connector option.
Centralized lubrication unit pressure switch - DSB series
The cutting edge DSB1 pressure switch is highly suitable for monitoring centralized lubrication systems. Unlike traditional pressure switches that are mounted in a branching off position...
Centralized lubrication unit pressure switch - DSB series
The cutting edge DSB1 pressure switch is highly suitable for monitoring centralized lubrication systems. Unlike traditional pressure switches that are mounted in a branching off position which creates a resulting "cul-de-sac" where grease is never mixed, this astonishing pressure switch is directly incorporated to the lubricant line. the cul-de-sac may become a blockage, or harden after some time leaving the pressure switch practically ineffective. The highly efficient and revolutionary DSB1 pressure switch is mounted right before the last distributor, where the grease consumed or ingested by the distributor constantly flows past the switch which then results in completely averting blockage.
Centralized lubrication unit pressure switch - DSA series
Typically, pressure switches can be used for oil, lubricants and fluid grease. However, when grease is used, a specific model of pressure switch is required...
Centralized lubrication unit pressure switch - DSA series
Typically, pressure switches can be used for oil, lubricants and fluid grease. However, when grease is used, a specific model of pressure switch is required to prevent hardening near the intake. Models with a piezo-resistive sensor function have more than one signal outputs and the device can be programmed to adjust the switching pressure magnitude.
These switches are designed for automatic monitoring and display a signal whenever a specific value has been reached for the pressure. For dual-line lubrication systems with centralization, differential switches are used.
These switches are designed for automatic monitoring and display a signal whenever a specific value has been reached for the pressure. For dual-line lubrication systems with centralization, differential switches are used.
Digital pressure switch / for centralized lubrication unit - DSC series
The analogue pressure gauge visually checks the pressure changes in centralized lubrication systems. In centralized lubrication system with piston distributors pressure build-up,...
Digital pressure switch / for centralized lubrication unit - DSC series
The analogue pressure gauge visually checks the pressure changes in centralized lubrication systems. In centralized lubrication system with piston distributors pressure build-up, pressure level and pressure release, are the most important indicators of reliable operation. Pressure switches are used for automatic monitoring. In contrast to pressure gauges with analogue displays, only one signal is displayed when specific pressure value has been reached. Pressure switches with a piezo-resistive sensor element have two or more signal outputs. The magnitude of the switching pressure can be adjusted by programming the device. Pressure switches can normally be used for lubricants, oil and fluid grease.