+7 (812) 645-08-06
Hydrostatic level sensors
select brand
Hydrostatic level sensor / for corrosive environments - MBLT series
This miniature submersible level transmitter impresses with various aspects, such as the small diameter size, which is only 0.63". In addition to this, the level monitoring and suitability...
Hydrostatic level sensor / for corrosive environments - MBLT series
This miniature submersible level transmitter impresses with various aspects, such as the small diameter size, which is only 0.63". In addition to this, the level monitoring and suitability for borehole applications are also unique selling points of this device. The item has been constructed after years of trouble-free service and comes with a welded 316 SS body, along with a 316 SS nose cap.
The top of the body is also 316 SS and prevents any damage when pulling the unit out of the installation. In terms of lightning and surge protection, a system was included by the manufacturer to cover this aspect. Finally, the choice of ETFE cable materials and polyether polyurethane are all vented for barometric pressure compensation.
The top of the body is also 316 SS and prevents any damage when pulling the unit out of the installation. In terms of lightning and surge protection, a system was included by the manufacturer to cover this aspect. Finally, the choice of ETFE cable materials and polyether polyurethane are all vented for barometric pressure compensation.
Hydrostatic level sensor / for tank - 0 - 1 000 mbar | JUMO MAERA S25
This main objective of engineering this device is to develop sensor technology of the JUMO MIDAS pressure transmitter range with...
Hydrostatic level sensor / for tank - 0 - 1 000 mbar | JUMO MAERA S25
This main objective of engineering this device is to develop sensor technology of the JUMO MIDAS pressure transmitter range with proven credibility and reliance.
There is significant saving of digital budget with sensor module calibration time. The materials are used at optimum due to compacted dimensions that make optimum use of materials. There is a standardized cable that remains housed in a secure tube, depending on the type of application, thus making it a worthy equipment.
There is significant saving of digital budget with sensor module calibration time. The materials are used at optimum due to compacted dimensions that make optimum use of materials. There is a standardized cable that remains housed in a secure tube, depending on the type of application, thus making it a worthy equipment.
Hydrostatic level sensor / for tank - 0 - 2.5 bar | JUMO MAERA S26
The Jumo Maera S26 measurement probe is made for hydrostatic filling measurements and has a liquid setup that is works with care as the probe can move deep into liquid and...
Hydrostatic level sensor / for tank - 0 - 2.5 bar | JUMO MAERA S26
The Jumo Maera S26 measurement probe is made for hydrostatic filling measurements and has a liquid setup that is works with care as the probe can move deep into liquid and increase measurements.
The unit has a measuring setup that is easy to manage with a stainless steel body on the probe to absorb any pressure and pass it through a probe with oil. This sensor is made for all sorts of electronic output signals and has the ability to work with a good electronic system integration.
The Jumo measurement probe has been specifically constructed to offer users a pleasant looking design that has the power to function accurately from 2.50m to 25m H2O setups.
The unit has a measuring setup that is easy to manage with a stainless steel body on the probe to absorb any pressure and pass it through a probe with oil. This sensor is made for all sorts of electronic output signals and has the ability to work with a good electronic system integration.
The Jumo measurement probe has been specifically constructed to offer users a pleasant looking design that has the power to function accurately from 2.50m to 25m H2O setups.
Hydrostatic level sensor / for tank - 50 - 1 600 mbar | JUMO MAERA F27
These are level measurement probes that are used for hydrostatic filling with leveled measurement in tanks or for determining the levels for open waters.
A plate capacitor having dual...
A plate capacitor having dual...
Hydrostatic level sensor / for tank - 50 - 1 600 mbar | JUMO MAERA F27
These are level measurement probes that are used for hydrostatic filling with leveled measurement in tanks or for determining the levels for open waters.
A plate capacitor having dual high resistance ceramic plates accomplishes the ceramic capacitive pressure measurement in complete isolation from other parameters. The change in the capacity is determined by the level and the extent of a pressure change. The level of measurement can be implemented for filling heights in the range of 0.5 m to 16 mWC.
This PTFE version is suitable for applications where sturdy and aggressive stainless size steel is involved. In context of the temperature oriented density, the temperature of fluid can be recorded via an integrated Pt 100 measurement.
A plate capacitor having dual high resistance ceramic plates accomplishes the ceramic capacitive pressure measurement in complete isolation from other parameters. The change in the capacity is determined by the level and the extent of a pressure change. The level of measurement can be implemented for filling heights in the range of 0.5 m to 16 mWC.
This PTFE version is suitable for applications where sturdy and aggressive stainless size steel is involved. In context of the temperature oriented density, the temperature of fluid can be recorded via an integrated Pt 100 measurement.
Hydrostatic level sensor - 0 - 10 bar | JUMO MAERA S28
JUMO MAERA S28 level measurement probe (404392) offers a measuring range of 0 - 250mbar to 0 - 10bar (0 - 2.50mWS to 0 - 100mWS)...
Hydrostatic level sensor - 0 - 10 bar | JUMO MAERA S28
JUMO MAERA S28 level measurement probe (404392) offers a measuring range of 0 - 250mbar to 0 - 10bar (0 - 2.50mWS to 0 - 100mWS)...
Hydrostatic level sensor / for corrosive environments - max. 600 bar | JUMO dTRANS p33
These units are safe to use in explosive spaces and work with measurements from 250mbar to 600bar for...
Hydrostatic level sensor / for corrosive environments - max. 600 bar | JUMO dTRANS p33
These units are safe to use in explosive spaces and work with measurements from 250mbar to 600bar for absolute and relative pressure levels.
The insensitive setup for aggressive materials uses medium temperatures from -40 to 85 Celsius and up to 200 Celsius. IP65 units are included, as are measuring ranges in many forms while a sturdy probe is used to make it work indoors or outdoors.
The insensitive setup for aggressive materials uses medium temperatures from -40 to 85 Celsius and up to 200 Celsius. IP65 units are included, as are measuring ranges in many forms while a sturdy probe is used to make it work indoors or outdoors.
Hydrostatic level sensor / water - max. 25 bar, -5 ... +80 °C | PSMN
The Baumer hydrostatic sensors measure water columns, surface levels and filling levels. They are able to...
Hydrostatic level sensor / water - max. 25 bar, -5 ... +80 °C | PSMN
The Baumer hydrostatic sensors measure water columns, surface levels and filling levels. They are able to recognize pressure differences and have the highest measurement precision available.
After installation, individual parameters can be set at a local level. The sensors can be used in all Ex-areas (ATEX). Expect long-term stability and durability because of the fully-welded housing with no gaskets.
After installation, individual parameters can be set at a local level. The sensors can be used in all Ex-areas (ATEX). Expect long-term stability and durability because of the fully-welded housing with no gaskets.
Hydrostatic level sensor / chemical-resistant - max. 2 bar, 5 - 40 °C | PSSN
BAUMER hydrostatic sensors measure filling levels giving good value for money. This sensor...
Hydrostatic level sensor / chemical-resistant - max. 2 bar, 5 - 40 °C | PSSN
BAUMER hydrostatic sensors measure filling levels giving good value for money. This sensor provides excellent resistance to fluids such as sludge or chlorine. The membrane is easy to clean and offers a rugged measuring system.
The plug and play system makes configuration a breeze. Build it in, measure, and then forget about it.
The plug and play system makes configuration a breeze. Build it in, measure, and then forget about it.