+7 (812) 645-08-06
Flow sensors
select brand
Thermal flow sensor / for liquids - 1 - 200 ml/min | SDN 503 series
The SDN 503 system is a thermal flow sensor for liquids, manufactured by EGE. This product contains inline flow controllers with...
Thermal flow sensor / for liquids - 1 - 200 ml/min | SDN 503 series
The SDN 503 system is a thermal flow sensor for liquids, manufactured by EGE. This product contains inline flow controllers with tube fittings that are resistant to threatening media, producing quick reaction times. It is used in detecting the flows between 1 and 200-ml/min, and features pressure resistance rates of up to 10 bar. Through a tube fitting or a G 1/4 thread, this sensor is suitable for pipe-related applications.
These sensors only require limited space, due to its solid design.
These sensors only require limited space, due to its solid design.
Online flow sensor / mini - 0,05 - 2 l/min, 1/4", IP 67, 4 - 20 mA | SDNC 5
The EGE SNDC 5 is a new extremely minimal inline flow controller, which gives new optimization potential outcomes to machine building and methodology technology engineers. Measuring simply 37 x 40 x 67 mm, the flow controller is...
Online flow sensor / mini - 0,05 - 2 l/min, 1/4", IP 67, 4 - 20 mA | SDNC 5
The EGE SNDC 5 is a new extremely minimal inline flow controller, which gives new optimization potential outcomes to machine building and methodology technology engineers. Measuring simply 37 x 40 x 67 mm, the flow controller is...
Thermal flow sensor / for gas - max. 200 °C | TA2
The THERMATEL® TA2 is a thermal mass flow transmitter from Magnetrol. The transmitter is founded on the thermal dispersion technology that functions to give mass measurements for air and gas flow operations. The components of this device are...
Thermal flow sensor / for gas - max. 200 °C | TA2
The THERMATEL® TA2 is a thermal mass flow transmitter from Magnetrol. The transmitter is founded on the thermal dispersion technology that functions to give mass measurements for air and gas flow operations. The components of this device are...
Air flow sensor / thermal - ±3m/s, 12 x 10 x 6 mm | 3D-MID
The MID-Thermic Flow Sensor is based around a thermal membrane and well suited for measuring even the smallest pressure differences. This unit is a joint effort by 2E mechatronic,...
Air flow sensor / thermal - ±3m/s, 12 x 10 x 6 mm | 3D-MID
The MID-Thermic Flow Sensor is based around a thermal membrane and well suited for measuring even the smallest pressure differences. This unit is a joint effort by 2E mechatronic, HSG-IMIT, the MMA AG and the company Gruner AG. The newly employed MID-technology integrates liquid-based connectors, while considerably reducing volume and uses wire bonding for the electrical contacting between the chip and MID. Additionally, it offers excellent accuracy, as fluidic channels are integrated into the silicon chip, while the modular setup permits varying measuring ranges from 0 to 3 mbar or 0 to 15 mbar. The full sensor can also be assembled in form of an SMD with standard SMT-machines.
Air flow sensor / thermal - Evaluation Kit
The 2E-Mechatronic offers this thermic flow sensor evaluation kit that delivers the possibility...
Air flow sensor / thermal - Evaluation Kit
The 2E-Mechatronic offers this thermic flow sensor evaluation kit that delivers the possibility of testing the sensor free for 4-weeks. The sensor is integrated with an evaluation electronic as well as 2.0 USB interface to cater convenient testing in every use. In addition, the enclosed USB-stick comprise of a software that can read-out measured values and show them on the screen.