+7 (812) 645-08-06
Voltage measuring devices
select brand
Single-phase voltmeter - MV15
The MV15 Series, manufactured by Selec, is a digital voltmeter equipped with 3 digit,...
Single-phase voltmeter - MV15
The MV15 Series, manufactured by Selec, is a digital voltmeter equipped with 3 digit, 7 segment LED display. It has a measurement range from 50 up to 60 Hz, accuracy rate of +/- 0.05 Hz, and auxiliary supply of 110 and 240 V AC. This is used in applications involving radio frequency (RF), microwave, audio, and AC devices.
Single-phase voltmeter - MV205
The MV205 Series, manufactured by Selec, is a digital voltmeter equipped with 3 digit,...
Single-phase voltmeter - MV205
The MV205 Series, manufactured by Selec, is a digital voltmeter equipped with 3 digit, 7 segment LED display. It has a measurement range from 50 up to 60 Hz, accuracy rate of +/- 0.05 Hz, and auxiliary supply of 110 and 240 V AC. This is used in applications involving radio frequency (RF), microwave, audio, and AC devices.
Single-phase voltmeter - MV207
The MV207 Series, manufactured by Selec, is a digital voltmeter equipped with 2...
Single-phase voltmeter - MV207
The MV207 Series, manufactured by Selec, is a digital voltmeter equipped with 2 wire electrical network. It has a measurement ranging from 50 up to 60 Hz, accuracy rate of +/- 0.05 Hz, and auxiliary supply of 110 and 240 V AC. It is used in applications involving radio frequency (RF), microwave, audio, and AC devices.
Single-phase voltmeter - MV305
The MV305 Series, manufactured by Selec, is a digital voltmeter equipped with 3 digit,...
Single-phase voltmeter - MV305
The MV305 Series, manufactured by Selec, is a digital voltmeter equipped with 3 digit, 7 segment LED display. It has a measurement range from 50 up to 60 Hz, accuracy rate of +/- 0.05 Hz, and auxiliary supply of 110 and 240 V AC. This is used in applications involving radio frequency (RF), microwave, audio, and AC devices.
Single-phase voltmeter - MV507
The MV507 Series, manufactured by Selec, is a digital voltmeter equipped with 2...
Single-phase voltmeter - MV507
The MV507 Series, manufactured by Selec, is a digital voltmeter equipped with 2 wire electrical network. It has a measurement range from 50 up to 60 Hz, accuracy rate of +/- 0.05 Hz, auxiliary supply of 110, and 240 V AC. This is used in applications involving radio frequency (RF), microwave, audio, and AC devices.
Voltage detector - 1 000 V | TAG780
This voltage detector is standard in nature. The model code is IEC 61243-3.It is used for checking if the voltage is absent and gives the voltage indication when the voltage...
Voltage detector - 1 000 V | TAG780
This voltage detector is standard in nature. The model code is IEC 61243-3.It is used for checking if the voltage is absent and gives the voltage indication when the voltage is as low as 1000V.
The additional features of this device are they have self integrated test. The phase display occurs a single pole mode. The display also shows polarity, both negative and positive. The voltage range is 12 to 1000V in DC and (15 to 60 Hz) in AC.There is different alarm tone for different voltage levels. The continuity testing threshold is 80 ?. There is front light and has an IP65 covering for safety from water, wind or dust. It is also protected against voltage overload by CATIV 1000V.
The additional features of this device are they have self integrated test. The phase display occurs a single pole mode. The display also shows polarity, both negative and positive. The voltage range is 12 to 1000V in DC and (15 to 60 Hz) in AC.There is different alarm tone for different voltage levels. The continuity testing threshold is 80 ?. There is front light and has an IP65 covering for safety from water, wind or dust. It is also protected against voltage overload by CATIV 1000V.
Voltage detector - 36 kV | DC3600BP
DC3600BP is designed ensuring IEC 61243-2 standards with suitable use for No-Voltage Testing of direct current overhead lines (mainly transport overhead lines: trams, metro, trains). A few models in this range...
Voltage detector - 36 kV | DC3600BP
DC3600BP is designed ensuring IEC 61243-2 standards with suitable use for No-Voltage Testing of direct current overhead lines (mainly transport overhead lines: trams, metro, trains). A few models in this range can indicate the presence of voltage due to residual electric charges (DC) and the presence of AC voltages (induced or actual). Equipped with red LEDs for detection of DC voltages, orange LEDs for presence of residual DC voltages while discharging, blue LEDs for presence of actual or induced AC voltages with an over voltage alarm, it provides audible and visual indication of the presence of voltage. The current passing through the detector cable is always lower than the standardized danger threshold (3.5 mA). Suitable for voltage range from 400-3600V, it can resists temporary over voltages up to 36 kV.
Electric field detector / remote - DCEDB382
The DCEDB382 is an electric field sensor. It is well suited for detecting the presence of electric fields. An ability to operate under a temperature ranging from - 25...
Electric field detector / remote - DCEDB382
The DCEDB382 is an electric field sensor. It is well suited for detecting the presence of electric fields. An ability to operate under a temperature ranging from - 25...
Insulated rod - TR - TRL - TRC
The TR, TRL and TRC by Sibille Fameca Electric is an insulated rod which features its compliance to IEC 60855-1 and IEC 61235-S. For this model, it can be used in checking...
Insulated rod - TR - TRL - TRC
The TR, TRL and TRC by Sibille Fameca Electric is an insulated rod which features its compliance to IEC 60855-1 and IEC 61235-S. For this model, it can be used in checking...
Insulated rod - PTUM
Compact insulated rods which can be used in great heights. The standard models are IEC 60855-1 and EN 60855-1. They can work in high voltage environment too like installation or removal of lifelines, measuring hooks and so on. The operation of the...
Insulated rod - PTUM
Compact insulated rods which can be used in great heights. The standard models are IEC 60855-1 and EN 60855-1. They can work in high voltage environment too like installation or removal of lifelines, measuring hooks and so on. The operation of the rod is by either pulling or compression. They are used with conductor lifting, i.e., for passage of heavy vehicles. There is option for checking the absence of nominal voltage. The insulated rods need not work for high mechanical loads solely. These rods are integrated with lever connections which makes it easier for operators to lock them at desired lengths. For all main references, the folded length is 1.8m. The fully extended length is dependent on the references used. An advantage while working the rod at great heights is that they retract and remain compact, allowing for direct vertical extension. Rods are easy to transport and store.
Horizontal injection molding machine / hydraulic / toggle / for rapid production cycles - 180 - 500 t | TM
The TM 180 – 500 t of Wittman is a compact power package in a great machine series. It has 3-platen technology with a 5-point double toggle system. The model provides...
Horizontal injection molding machine / hydraulic / toggle / for rapid production cycles - 180 - 500 t | TM
The TM 180 – 500 t of Wittman is a compact power package in a great machine series. It has 3-platen technology with a 5-point double toggle system. The model provides ultimate performance, simple operation and maintenance, energy savings and cost-efficiency. Furthermore, it has high opening and closing speed and short dry cycle times. the product gives the highest precision and perfect dynamic. Due to energy efficiency, economic operation is possible. The clamping unit's design is composed of extremely rigid and sturdy clamping plates and machine frame. Its injection unit also has linear guide systems to ensure precise axial movements of the injection unit.