+7 (812) 645-08-06
Electrical calibrators
select brand
Signal calibrator - 0.1 - 100 MHz | 5045
The 5045 Oscilloscope Calibrator is manufactured by Time Electronics. It give a wide range of outputs for amplitude, frequency, period and bandwidth. The...
Signal calibrator - 0.1 - 100 MHz | 5045
The 5045 Oscilloscope Calibrator is manufactured by Time Electronics. It give a wide range of outputs for amplitude, frequency, period and bandwidth. The product has a high accuracy calibrator that is capable of gauging digital and analogue oscilloscopes, timer, and frequency meters. Amplitude calibration is carried out by a DC signal or 1kHz square-wave ranging from 1mv to 220 V. It has a frequency of 0.1 Hz to 10 MHz.
The product is easy to operate, because the functions and ranges are conveniently located from the panel. It also enables the user to control the device through a laptop or PC.
The product is easy to operate, because the functions and ranges are conveniently located from the panel. It also enables the user to control the device through a laptop or PC.
Reactive power controller - RAPIDUS Series
POWER FACTOR CONTROLLER
- No need to use extra energy analyzer/multimeter in your compensation panel.
- Indice synchronization with electric meters.
-...
- No need to use extra energy analyzer/multimeter in your compensation panel.
- Indice synchronization with electric meters.
-...
Reactive power controller - RAPIDUS Series
POWER FACTOR CONTROLLER
- No need to use extra energy analyzer/multimeter in your compensation panel.
- Indice synchronization with electric meters.
- Built-in temperature sensor.
- Dynamic compensation mode, detects failed capacitors which are least than 20 % of its initial value. Automatic withdrawal of failed capacitor from compensation.
- Transmission error < 0, 1 %
- Real time clock
- Indicating voltage and current harmonics up to 21st harmonics over harmonics spectrum and harmonics tables.
- Indicating connection time for each of the banks.
- Learning connection configurations and capacitor stages.
- No need to use extra energy analyzer/multimeter in your compensation panel.
- Indice synchronization with electric meters.
- Built-in temperature sensor.
- Dynamic compensation mode, detects failed capacitors which are least than 20 % of its initial value. Automatic withdrawal of failed capacitor from compensation.
- Transmission error < 0, 1 %
- Real time clock
- Indicating voltage and current harmonics up to 21st harmonics over harmonics spectrum and harmonics tables.
- Indicating connection time for each of the banks.
- Learning connection configurations and capacitor stages.
Reactive power controller - 400 V | REOTRON RP
The REOTRON RP-Controller is used for control/regulation of reactive power
compensation units.
The standard RP-Controller is designed for a...
compensation units.
The standard RP-Controller is designed for a...
Reactive power controller - 400 V | REOTRON RP
The REOTRON RP-Controller is used for control/regulation of reactive power
compensation units.
The standard RP-Controller is designed for a 400 VAC to 415 VAC (L-L)
operation voltage and has a switchable current-measurement input 5A/1A. From the 24 V switching outputs for the compensation stages, it is possible to directly control 24 VDC relays or the REOTRON THY-QC50 thyristor modules.
The control principle enables minimum number of switching operations in order to ensure optimum capacitor life time. The 4-quadrant operation enables to feed back into the own power systems.
compensation units.
The standard RP-Controller is designed for a 400 VAC to 415 VAC (L-L)
operation voltage and has a switchable current-measurement input 5A/1A. From the 24 V switching outputs for the compensation stages, it is possible to directly control 24 VDC relays or the REOTRON THY-QC50 thyristor modules.
The control principle enables minimum number of switching operations in order to ensure optimum capacitor life time. The 4-quadrant operation enables to feed back into the own power systems.