+7 (812) 645-08-06
Samplers
select brand
Ambient air sampler - 45 - 96 m³/hr | HiVol 3000
The HiVol 3000 high volume air sampler is conceived to provide high quality, reliable sampling with instant error notification ensuring confident results and minimal data loss. The device operates with a blend of advanced programming functions...
Ambient air sampler - 45 - 96 m³/hr | HiVol 3000
The HiVol 3000 high volume air sampler is conceived to provide high quality, reliable sampling with instant error notification ensuring confident results and minimal data loss. The device operates with a blend of advanced programming functions and electronic volumetric flow control to maintain consistent flow and collect truly representative sample of dust. The high volume air sampler comes with optional attachments to measure wind speed and direction, can be used as riggers to start sampling and also capture other meteorological parameters.
The HiVol 3000 high volume air samplers are U.S. EPA approval for PM10 air sampling (RFPS-0706-162). They feature superior quality design and construction. HiVol 3000 is the only high volume air sampler with CE and C-tick approval. The sampler provides reliable continuous sampling and advanced communications (error alerts, filter full alerts and remote instrument control).
The HiVol 3000 high volume air samplers are U.S. EPA approval for PM10 air sampling (RFPS-0706-162). They feature superior quality design and construction. HiVol 3000 is the only high volume air sampler with CE and C-tick approval. The sampler provides reliable continuous sampling and advanced communications (error alerts, filter full alerts and remote instrument control).
Ambient air sampler - 10 - 20 m³/hr | HiVol 3000 PUF
This HiVol 3000 PUF sampler offers dependable sampling of natural compounds on a Poly-urethane foam. This device is specifically...
Ambient air sampler - 10 - 20 m³/hr | HiVol 3000 PUF
This HiVol 3000 PUF sampler offers dependable sampling of natural compounds on a Poly-urethane foam. This device is specifically constructed to sample a vast array of organic compounds, and keep them in a clean environment. It combines this sampling with basic meteorological parameters, and can be used for fenceline sampling. Ecotech has also developed an XAD sampler applicable for measuring wider range of compounds. The device's nominal volumetric flow range is at a nominal 10-20m3/hr.
Ambient air sampler - 10 - 15 m³/hr | HiVol 3000 XAD
The HiVol 3000 XAD model, manufactured by Ecotech, is an ambient air sampler which provides...
Ambient air sampler - 10 - 15 m³/hr | HiVol 3000 XAD
The HiVol 3000 XAD model, manufactured by Ecotech, is an ambient air sampler which provides...
Dust sampler / for flue gas - 120 - 150 m³/hr | MegaVol 3000
The MegaVol 3000 is a dust sampler specially designed for flue gas. It is specifically constructed...
Dust sampler / for flue gas - 120 - 150 m³/hr | MegaVol 3000
The MegaVol 3000 is a dust sampler specially designed for flue gas. It is specifically constructed...
Ambient air sampler - 1 - 4.5 l/min | MicroVol 1100
The MicroVol 1100 low volume air sampler is specially designed to provide flexible sampling platform for PM10, PM2.5 or TSP particulates and basic meteorological parameters. The device...
Ambient air sampler - 1 - 4.5 l/min | MicroVol 1100
The MicroVol 1100 low volume air sampler is specially designed to provide flexible sampling platform for PM10, PM2.5 or TSP particulates and basic meteorological parameters. The device monitors indoor and outdoor air quality. The low noise instrument with low power is used to sample particulates in residential or workplaces with minimal power and minimal distraction. Its active volumetric flow control enables to maintain a constant flow rate for accurate particulate measurement in mg/m3 irrespective of particulate loading. The sampler is CE and C-tick approval, manufactured under ISO9001 and ISO14001. PM10 and PM2.5 meets AS/NZS 3580.9.9 2006 and AS/NZS 3580.9.10 2006 standards.
Bulk solid sampler / rotary cup - PRL
The PRL Primary Sampler is an instrument designed for samples in flight particulate material. Its sample cutter rotates at a constant speed through the falling stream of material. This occurs at...
Bulk solid sampler / rotary cup - PRL
The PRL Primary Sampler is an instrument designed for samples in flight particulate material. Its sample cutter rotates at a constant speed through the falling stream of material. This occurs at predetermined intervals or at a signal from a belt weigher or other similar devices. A limit switch-operated brake motor terminates the travel.
Each of the device's cutters may be used to suit a particular application. In order for the device to work correctly, the maximum particle size and sample increment mass must be supplied. The increment mass is directly proportional to the cutter opening and the rotational velocity.
Delivered with a control panel, the PRL sampler is a compact unit which can be installed both in existing and new plants.
Each of the device's cutters may be used to suit a particular application. In order for the device to work correctly, the maximum particle size and sample increment mass must be supplied. The increment mass is directly proportional to the cutter opening and the rotational velocity.
Delivered with a control panel, the PRL sampler is a compact unit which can be installed both in existing and new plants.
Specimen sampler and divider / for bulk materials - PRV200
The PRV200 model is manufactured by Eriez, and is a secondary splitter that is intended for installation within a chute system for use in laboratories. There is a sample cutting...
Specimen sampler and divider / for bulk materials - PRV200
The PRV200 model is manufactured by Eriez, and is a secondary splitter that is intended for installation within a chute system for use in laboratories. There is a sample cutting cone that has a nonstop rotation and at constant velocity through the falling stream.
The unit has only one moving segment, which the cone is controlled by a geared engine and within a total cover for dust control. It is especially constructed to abstract small volume samples of fine dry materials, which is suitable for cutting a final laboratory sample from a sampling system.
There is a division ratio that can be adjusted from 1 to 4 and 1 to 72 that depends on the particle size.
The unit has only one moving segment, which the cone is controlled by a geared engine and within a total cover for dust control. It is especially constructed to abstract small volume samples of fine dry materials, which is suitable for cutting a final laboratory sample from a sampling system.
There is a division ratio that can be adjusted from 1 to 4 and 1 to 72 that depends on the particle size.
Oil sampling tube - 60 - 1 000 ml
Sampling a representative volume of liquid (lube oil, fuel oil, solvent...) is the first...
Oil sampling tube - 60 - 1 000 ml
Sampling a representative volume of liquid (lube oil, fuel oil, solvent...) is the first essential step in analysing fluids in service and monitoring the performance of machinery over time.
The GESERCO sampling Mini-Kits provide a cost effective and state-of-the-art solution for sampling, documenting and preserving representative fluid samples.
The GESERCO sampling Mini-Kits provide a cost effective and state-of-the-art solution for sampling, documenting and preserving representative fluid samples.