+7 (812) 645-08-06
Nitrogen oxides analyzers (NOx)
select brand
Sulfur analyzer / nitrogen - ASTM D5453, D6667, D7183 | NSX-2100V
Elemental Analyzer NSX-2100V is designed to optimize operation in plants and to also save catalysts. The device offers fast and reliable service. This sulfur analyzer can carry out a wide range of measurements, from...
Sulfur analyzer / nitrogen - ASTM D5453, D6667, D7183 | NSX-2100V
Elemental Analyzer NSX-2100V is designed to optimize operation in plants and to also save catalysts. The device offers fast and reliable service. This sulfur analyzer can carry out a wide range of measurements, from 0.02ppm to percent level in the highest reliability. This would be by the contribution of Oxygen control combustion and also unique optics. It combines the method of Ultra Violet Fluorescence with vertical furnace for very precise measurement of the Sulfur elements trace for petroleum, petrochemical, fuel, bio-diesels.
Elemental Analyzer NSX-2100V can also be used for simultaneous analysis of Sulfur and Nitrogen. The device can be customized for various applications such as autoliquid sampler, Gas&LPG injector, Trap&release unit, Nitrogen detector. It is also available in horizontal version for solid sample.
Elemental Analyzer NSX-2100V can also be used for simultaneous analysis of Sulfur and Nitrogen. The device can be customized for various applications such as autoliquid sampler, Gas&LPG injector, Trap&release unit, Nitrogen detector. It is also available in horizontal version for solid sample.
Sulfur analyzer / NOx / sulfur dioxide / hydrogen sulfide - 125 - 500 ppm | 919
The allowable stack emissions from various industries are extensively controlled by various governmental air pollution regulations. The industries often need the facility to measure and report emission of a single pollutant. The accurate monitoring of the...
Sulfur analyzer / NOx / sulfur dioxide / hydrogen sulfide - 125 - 500 ppm | 919
The allowable stack emissions from various industries are extensively controlled by various governmental air pollution regulations. The industries often need the facility to measure and report emission of a single pollutant. The accurate monitoring of the specified pollutants require a reliable analyzer capable to measure the particular pollutant from stack gas emitted at typically hot, saturated with moisture, and dirty conditions.
The AMETEK Western Research Model 919 provides a complete solution to this. The Model 919 is a single gas version of Model 920 Continuous Emissions Monitor specifically configured for consistent monitoring of the stack emissions on concentration basis. The model additionally equipped with optional zirconium oxide sensor monitors oxygen. The extremely robust and reliable analyzer is built with zero moving parts and its UV-based measurements do not suffer from H2O and CO2 interference simplifying sample handling and sample integrity.
The AMETEK Western Research Model 919 provides a complete solution to this. The Model 919 is a single gas version of Model 920 Continuous Emissions Monitor specifically configured for consistent monitoring of the stack emissions on concentration basis. The model additionally equipped with optional zirconium oxide sensor monitors oxygen. The extremely robust and reliable analyzer is built with zero moving parts and its UV-based measurements do not suffer from H2O and CO2 interference simplifying sample handling and sample integrity.
Sulfur analyzer / hydrogen sulfide / sulfur dioxide / SO2 - 125 - 500 ppm | 919
The AMETEK Western Research Model 919 is a hot/wet single gas analyzer. Due to government air pollution regulations, the allowable stack emission from many types of industrial facilities is restricted. A facility will often need...
Sulfur analyzer / hydrogen sulfide / sulfur dioxide / SO2 - 125 - 500 ppm | 919
The AMETEK Western Research Model 919 is a hot/wet single gas analyzer. Due to government air pollution regulations, the allowable stack emission from many types of industrial facilities is restricted. A facility will often need to measure the emissions of a single pollutant that is emitted by their application and report the results. This analyzer is designed to monitor the pollutant of interest with accuracy by reliably measuring the pollutant in stack gas that is oftentimes hot, dirty, and saturated with moisture. When an optional zirconium oxide sensor is added, the 919 can monitor oxygen. The sample system components are heated above the sample gas’ dew point. All essential sample gas and calibration of flow management is performed by this unit. It has no moving parts, making maintenance an easy process. There is no CO2 or H2O interference. The accuracy is >2.5-ppm SO2.
Nitrogen dioxide analyzer - 0 - 1 ppm, 10 s | AS32M
The AS32M is manufactured by Environment S.A., and is a nitrogen dioxide analyzer that is ideal for use in accurately regulating nitrogen dioxide levels ranging from 0 ppm up to 1 ppm....
Nitrogen dioxide analyzer - 0 - 1 ppm, 10 s | AS32M
The AS32M is manufactured by Environment S.A., and is a nitrogen dioxide analyzer that is ideal for use in accurately regulating nitrogen dioxide levels ranging from 0 ppm up to 1 ppm. It is suitable for use in a wide variety of applications including air regulation, indoor air quality regulation, mobile and fixed regulating laboratories, and in gauging medical gases.
The unit gauges the sample directly, thus eliminates the need of any chemical conversion equipment such as a convertor, ozone generator, external pump, scrubbers, and it does not emit and toxic gas. It has a short response time of 10 seconds, and has the capacity to spot short events precisely. The AS32M is compact, and requires minimal servicing.
The unit gauges the sample directly, thus eliminates the need of any chemical conversion equipment such as a convertor, ozone generator, external pump, scrubbers, and it does not emit and toxic gas. It has a short response time of 10 seconds, and has the capacity to spot short events precisely. The AS32M is compact, and requires minimal servicing.
Nitrogen oxide analyzer - 0 - 20 ppm, min. 30 s | AC32M
AC32M nitrogen oxide analyzer (NO, NOX, NO2) is used for low level monitoring of nitrogen oxides (NO-NO2-NOX) from 0.4 ppb to 20 ppm. The model operates on single chamber chemiluminescence...
Nitrogen oxide analyzer - 0 - 20 ppm, min. 30 s | AC32M
AC32M nitrogen oxide analyzer (NO, NOX, NO2) is used for low level monitoring of nitrogen oxides (NO-NO2-NOX) from 0.4 ppb to 20 ppm. The model operates on single chamber chemiluminescence technology and in compliance with RoHS Directive. The analyzer features an ultra compact and light weight rackable 19"/3U model and includes SMD enhanced electronics.
The new model includes built-in serial interface (RS 232 / RS 422), USB & TCP/IP connectivity. Its onboard web server is compatible with any internet browser. Es@cloud™ user interface with on-line help is used for display, configuration, maintenance, diagnostics or software updating of the analyzer, remotely, from any PC, tablet or iPhoneTM.
The new model includes built-in serial interface (RS 232 / RS 422), USB & TCP/IP connectivity. Its onboard web server is compatible with any internet browser. Es@cloud™ user interface with on-line help is used for display, configuration, maintenance, diagnostics or software updating of the analyzer, remotely, from any PC, tablet or iPhoneTM.
Ammonia analyzer / nitrogen protoxide / N2O / FT-IR - 0 - 1 ppm, 180 s | AC32M-CNH3
The AC32M - CNH3 Series, manufactured by Environment S.A®, is an analyzer and chemiluminescence converter for ammonia nd nitrogen oxides....
Ammonia analyzer / nitrogen protoxide / N2O / FT-IR - 0 - 1 ppm, 180 s | AC32M-CNH3
The AC32M - CNH3 Series, manufactured by Environment S.A®, is an analyzer and chemiluminescence converter for ammonia nd nitrogen oxides....
Nitrogen oxide analyzer - min. 0.1 - 10 ppm, max. 2 s | TOPAZE 32M
The Topaze 32m is a heated CLD Nitrogen Oxides analyzer manufactured by Environment S.A. This...
Nitrogen oxide analyzer - min. 0.1 - 10 ppm, max. 2 s | TOPAZE 32M
The Topaze 32m is a heated CLD Nitrogen Oxides analyzer manufactured by Environment S.A. This device utilizes the CLD technique, and simultaneous measurement of NO, NO2, and NOx. It is also used for continuous emission monitoring, combustion control, and process monitoring. The tool is available in three versions for use in laboratories and research centers.